- Home
- Equipment
Refine by
Bruns Environmental Equipment & Supplies
26 equipment items found
Manufactured by:Bruns Umwelt- und Entsorgungstechnik GmbH & Co. KG based inGeeste, GERMANY
BRUNS container trailer for transporting roll-off containers according to DIN 30722. Container trailer fitted with 8 tyres. Roll-off container load securing via a pneumatic 4-point claw lock. Trailer has KTL + powder ...
Manufactured by:Bruns Umwelt- und Entsorgungstechnik GmbH & Co. KG based inGeeste, GERMANY
For simultaneous pouring of 2 Zarges containers. Stationary lift-tilt device for ramp-mounting. Pouring pan split for lifting 2 containers. Lift-tilt device with two-hand safety control. Lift-tilt device ready for ...
Manufactured by:Bruns Umwelt- und Entsorgungstechnik GmbH & Co. KG based inGeeste, GERMANY
Art. Nr. 400-025: BRUNS-paper collection vehicle content 25m3 . Paper collection vehicle for the emptying of depot and flush mounted wagons. Construction with an integrated press and a cargo floor discharge. The rear flap is electric hydraulic operated. The construction of the paper collection and the cargo floor is driven by a separate hydraulic power take-off. Crane is mounted between the press ...
Manufactured by:Bruns Umwelt- und Entsorgungstechnik GmbH & Co. KG based inGeeste, GERMANY
Dimensions: 4,000 x 2,150 mm. City hook system. Front wall raised to 2 m. 4 removable posts per ...
Manufactured by:Bruns Umwelt- und Entsorgungstechnik GmbH & Co. KG based inGeeste, GERMANY
Art. Nr. 450-001: BRUNS dewatering container with stainless-steel screens and drainage canal. Sludge dewatering is carried out by gravity. Materials to be dewatered: canal residues, refuse, grit, oil-contaminated substances, screenings, etc. This roll-off container is equipped with a hinged cover with manual hydraulics and an opening angle of ...
Manufactured by:Bruns Umwelt- und Entsorgungstechnik GmbH & Co. KG based inGeeste, GERMANY
BRUNS dewatering skip in galvanized design. Capacity ca. 7 m³. Skip with perforated plates welded into the floor and all sides. A plastic fabric is additionally attached to the perforated plates via struts. Dewatering skip is suitable for the dewatering of: refuse, grit, screenings, canal ...
Manufactured by:Bruns Umwelt- und Entsorgungstechnik GmbH & Co. KG based inGeeste, GERMANY
BRUNS dewatering basket, suitable for BRUNS set-down skip, model M 209. Basket to be fixed in skip and to remove for cleaning ...
Manufactured by:Bruns Umwelt- und Entsorgungstechnik GmbH & Co. KG based inGeeste, GERMANY
35 cbm capacity. Combined mounting system for wire-rope system and chain hoist. Single-leaf door on emptying side, with ratchet lock. Round aperture, suitable for screw compactor. Tarpaulin cover on aperture (for transport). Centring rails for precise coupling to screw ...
Manufactured by:Bruns Umwelt- und Entsorgungstechnik GmbH & Co. KG based inGeeste, GERMANY
20 cbm capacity. Comb lifting device: for 120 – 360 litre large waste containers. DIN mount for 660 – 1100 litre large waste containers. Arms for discharge containers of capacity up to 5 cbm. Operation via radio remote-control unit. Emergency override on the rear loader. Weighing system. Rear view camera. Split covers as wind protection. Driven by truck's ...
Manufactured by:Bruns Umwelt- und Entsorgungstechnik GmbH & Co. KG based inGeeste, GERMANY
Motor rating 7.5 kW. Waste chute with wall-mounted hopper. 75%-full indicator. 100%-full indicator. Light barrier control. Central lubrication system. Extra-large inspection door. Additional inspection door in waste chute. Container coupling via spindle tensioner. Compactor container for roll-off skip loaders. Aperture with closure grid and tarpaulin. Short centring ...
Manufactured by:Bruns Umwelt- und Entsorgungstechnik GmbH & Co. KG based inGeeste, GERMANY
37 cbm capacity. Crane cutout in front and rear side of the container. Rear top-hinged tailgate covering half of the rear. Depository for crane clamp on rear. Special door lock. Central lock with ratchet operation from side. Centrally divided netted door opens hydraulically or with rack-and-pinion drive. Interior top-hinged flap for subdividing the container. All metal sheets made of highly ...
Manufactured by:Bruns Umwelt- und Entsorgungstechnik GmbH & Co. KG based inGeeste, GERMANY
Dimensions: 7,000 x 2,350 x 2,250. Hook system according to DIN. Integrated sliding floor. Hinged cover operated by manual hydraulics. Single-leaf door with aluminium flap at rear. Vertical ...
Manufactured by:Bruns Umwelt- und Entsorgungstechnik GmbH & Co. KG based inGeeste, GERMANY
Art. Nr. 300-049: Roll-off container, foam concentrate, 10,000 ...
Manufactured by:Bruns Umwelt- und Entsorgungstechnik GmbH & Co. KG based inGeeste, GERMANY
BRUNS-BOX high-performance container with a fast-pivot cover (multi-cap). Container made of HARDOX 450. Top-hinged tailgate on emptying side with rubber seal, watertight when closed. Cover comprising double-walled aluminium side profile sections, driven via vehicle's auxiliary ...
Manufactured by:Bruns Umwelt- und Entsorgungstechnik GmbH & Co. KG based inGeeste, GERMANY
Art. Nr. 700-010: BRUNS multi-bucket wagon for heavy scrap metal type M107 SS. Floor board 10 mm, side panels 6 mm overall. External hot rolled profiles. Additional internal reinforcing angles on floor, front and rear ...
Manufactured by:Bruns Umwelt- und Entsorgungstechnik GmbH & Co. KG based inGeeste, GERMANY
Dimensions: 2,500 x 2,000 x 1,700 mm. Capacity ca. 9 cbm. Lashing aids. Mounting according to customer requirements. Painted in your choice of ...
Manufactured by:Bruns Umwelt- und Entsorgungstechnik GmbH & Co. KG based inGeeste, GERMANY
BRUNS roll-off container with side loader, for collection of oil-contaminated substances with the necessary BK2 approval. Side loader with comb lift and DIN trunnion lift, for emptying 120, 240, and 1100 ltr. large waste ...
Manufactured by:Bruns Umwelt- und Entsorgungstechnik GmbH & Co. KG based inGeeste, GERMANY
BRUNS container traversing system for compactor container. Container shifting system for fully automatic container changing. Trolley runs on rails via flanged wheels. Compactor container suitable for HN-Schörling side loaders and for BRUNS stationary cover ...
Manufactured by:Bruns Umwelt- und Entsorgungstechnik GmbH & Co. KG based inGeeste, GERMANY
Tilt device for pouring 120-240 ltr. large waste containers. Special pouring height 2,650 mm for pouring into roll-off containers. Pourable containers: 120-240 ltr. large waste containers. Lift-tilt device secured with ratchets. Bin lift with comb mounting. Two-hand safety control. Tilt device fitted with sturdy swivel ...
Manufactured by:Bruns Umwelt- und Entsorgungstechnik GmbH & Co. KG based inGeeste, GERMANY
Pourable containers: 120-240 ltr. large waste containers and 660–1100 ltr. large waste containers via DIN mounting. Lift-tilt device secured with ratchets.. Bin lift with comb and DIN mountings. Two-hand safety control. Tilt device fitted with sturdy swivel and fixed ...