- Home
- Equipment
Refine by
Co2meter Environmental Equipment & Supplies
38 equipment items found
Manufactured by:CO2Meter, Inc. based inOrmond Beach, FLORIDA (USA)
The SV-0130 Safety Shut Off Valve automatically shuts off the gas supply in the room or at the tank for several of our devices in case of a high-gas ...
Manufactured by:CO2Meter, Inc. based inOrmond Beach, FLORIDA (USA)
This sensor pump kit contains all the accessories you need to draw samples using our SenseAir or GSS sensors, including our sensor SDKs. For sensors utilizing a tube cap, install the pump after the sensor allowing the sample to be pulled over the sensor membrane/chamber for accurate ...
Manufactured by:CO2Meter, Inc. based inOrmond Beach, FLORIDA (USA)
The CM-1029: Industrial Gas Strobe or Siren is designed to provide an additional flashing indicator of a potential gas leak in indoor areas that are using/storing compressed ...
Manufactured by:CO2Meter, Inc. based inOrmond Beach, FLORIDA (USA)
The CO2Meter Tube Cap Adapter converts gas sensors from diffusion applications to sampling. These custom tube caps include a ribbon cable to measure barometric pressure, temperature, and % relative humidity from the gas ...
Manufactured by:CO2Meter, Inc. based inOrmond Beach, FLORIDA (USA)
The Filters and Water Traps are designed to protect sensors from receiving excess water and particulate matter from any in-line process. Simply place the appropriate filters in-stream prior to your sensor and they will remove the particles or water for you. In high humidity applications please also consider purchasing Nafion Tubing. ...
Manufactured by:CO2Meter, Inc. based inOrmond Beach, FLORIDA (USA)
The CM-7004: CO2 Multi Sensor Horn Strobe Add-On is designed to provide instant audible/visual strobe alarm that can be used in interior placements with the CO2 Multi Sensor Tablet, Sensors, and Reset Units. This CO2 Multi Sensor Horn Strobe works only with our CO2 Multi Sensor Tablet. ...
Manufactured by:CO2Meter, Inc. based inOrmond Beach, FLORIDA (USA)
This strobe tower provides a bright, flashing indicator and alarm sound for any of our CO2 or Oxygen Storage Safety Alarms. It clearly indicates the alarm level to anyone in the ...
Manufactured by:CO2Meter, Inc. based inOrmond Beach, FLORIDA (USA)
The TIM10 Desktop CO2, Temp, & Humidity Monitor continuously shows carbon dioxide, temperature, and relative humidity levels so you can monitor the quality of air in your home, office or indoor grow ...
Manufactured by:CO2Meter, Inc. based inOrmond Beach, FLORIDA (USA)
The K30 10% (100,000 ppm) carbon dioxide sensor module is a maintenance-free transmitter module intended to monitor high levels of CO2 found in storage tanks or biological applications. It is an accurate, low-cost solution for OEMs products like CO2 safety alarms or leak ...
Manufactured by:CO2Meter, Inc. based inOrmond Beach, FLORIDA (USA)
These Remote CO2 Storage Safety 3 Alarm Strobe Lights are designed to provide an additional flashing indicator of carbon dioxide leaks in large or noisy ...
Manufactured by:CO2Meter, Inc. based inOrmond Beach, FLORIDA (USA)
The Remote CO2 Storage Safety Dual Alarm (RAD-0102) is designed to protect people who work near carbon dioxide stored or produced in confined spaces. At high levels, CO2 can result in severe negative health effects ranging from headaches, fatigue, asphyxiation, and even ...
Manufactured by:CO2Meter, Inc. based inOrmond Beach, FLORIDA (USA)
Turns our pSense or cSense CO2+RH/T into a tethered data logger, using your computer's hard drive for storage. Data can be saved to industry-standard CSV file format for processing. Works ...
Manufactured by:CO2Meter, Inc. based inOrmond Beach, FLORIDA (USA)
The K30 10,000ppm Sensor Module (030-8-0006) formerly known as (SE-0018) is intended to be built into different host devices that require CO2 monitoring indoors. It is an accurate, proven, low-cost solution for OEMs who want to integrate CO2 sensing into their products, research, and studies. ...
Manufactured by:CO2Meter, Inc. based inOrmond Beach, FLORIDA (USA)
With the CM-1650 Portable CO2 Welding Gas Analyzer, CO2Meter is providing customers with advanced analysis of active welding gas blends that contain 0-100% carbon dioxide. This device verifies the most common gas mixtures in the industry and will set the main target for verification. Plus, this device is the only device that meets accuracy standards set by the American Welding Society (AWS) at a ...
Manufactured by:CO2Meter, Inc. based inOrmond Beach, FLORIDA (USA)
The SAN-10 Personal 5% CO2 Safety Monitor and Data Logger is designed for employees who work in enclosed areas where carbon dioxide buildup may cause personal harm. This device features exclusive data logging capabilities and the data log files can be downloaded as csv./xls. files then displayed via our GasLab ...
Manufactured by:CO2Meter, Inc. based inOrmond Beach, FLORIDA (USA)
Hydrophobic filters cover the inside vents of all our portable ambient air CO2 meters to allow airflow in while keeping out water droplets, dirt, dust, or mold spores that can affect the sensors. This makes our data logger suitable for extreme environment applications ...
Manufactured by:CO2Meter, Inc. based inOrmond Beach, FLORIDA (USA)
The CM-900: CO2 Industrial Fixed Gas Detector is a gas safety solution for industries that need to measure up to 5% carbon dioxide levels in order to mitigate potential hazards from occurring. This device also includes an IP64 industrial enclosure specifically for harsh environments or where wash-down is ...
Manufactured by:CO2Meter, Inc. based inOrmond Beach, FLORIDA (USA)
This accurate, easy-to-adjust CO2 regulator and flow meter support from 0.5 to 15 SCFH (Standard Cubic Feet Per Hour) with an electronic solenoid valve. It comes with a tank pressure gauge, an easy-to-read square-shaped flow meter, and 6-foot power cord. It will work with any 120VAC control ...
Manufactured by:CO2Meter, Inc. based inOrmond Beach, FLORIDA (USA)
The Oxygen Deficiency Safety Alarm protects staff in enclosed areas near storage cylinders of nitrogen, argon, ammonia, chlorine, propane, nitrous oxide, helium, argon, or other inert ...
Manufactured by:CO2Meter, Inc. based inOrmond Beach, FLORIDA (USA)
The SV-0129 Safety Shut Off Valve automatically shuts off the gas supply in the room or at the tank for several of our devices in case of a high-gas ...