- Home
- Equipment
Refine by
Cvc Environmental Equipment & Supplies
10 equipment items found
Manufactured by:Cincinnati Valves Company (CVC) based inCincinnati, OHIO (USA)
Lunkenheimer non-return valves cut out a boiler automatically when inside pressure drops suddenly or when heat is withdrawn. External spring is reversed and valve acts as a spring-loaded stop-check valve. Spring may be adjusted from the outside while valve is under pressure to compensate for excessive steam pulsations. Valves may be installed in either vertical or horizontal position. ...
Manufactured by:Cincinnati Valves Company (CVC) based inCincinnati, OHIO (USA)
These IBBM valves are designed for dependable performance on steam, water, gas and oil lines where quick shut-off, control or regulation of flow is required. Bronze trim to handle fluids corrosive to iron. Seats are regrindable; discs and seats are renewable, without removing valves from the ...
Manufactured by:Cincinnati Valves Company (CVC) based inCincinnati, OHIO (USA)
Our tapered plug valves (lubricated plug valves) are manufactured with heavy walled bodies and are designed to withstand expected high pressures and line stresses. The tapered plugs and valve bodies have channels which match and allow for positive sealant to travel and protects sealing ...
Manufactured by:Cincinnati Valves Company (CVC) based inCincinnati, OHIO (USA)
CVC Valves offers a high quality 2 Piece Ball Valve series. Our Floating Ball Valves range from 1/2″ to 10″ with pressure ratings from Class 150 to ...
Manufactured by:Cincinnati Valves Company (CVC) based inCincinnati, OHIO (USA)
With such features as small fluid resistance, smooth flow channel, rapid opening and closing and easy automatic control the Metal Seated Ball Valve has been widely used. The Metal Seated Ball Valve has been applied in the petroleum, energy and chemical industry. With its metal seating it can take higher temperatures ...
Manufactured by:Cincinnati Valves Company (CVC) based inCincinnati, OHIO (USA)
Design provides full flow with minimum pressure loss and permits free action of the disc. Valves may be used in either horizontal or vertical lines. Two body-trim combinations: All-Iron or IBBM. Bronze mounted (IBBM) models are recommended for use with oil, steam, water, air, gas and other fluids that do not attack bronze. All-Iron valves are for use with fluids which attack bronze but not ...
Manufactured by:Cincinnati Valves Company (CVC) based inCincinnati, OHIO (USA)
LUNKENHEIMER Lift Check Valves are ruggedly designed for dependable operation under conditions where pulsating action in line causes excessive wear in swing-type check valves. Discs are ...
Manufactured by:Cincinnati Valves Company (CVC) based inCincinnati, OHIO (USA)
The Lunkenheimer Gate Valve with non-rising stem design is for use in cramped spaces, with minimal headroom. Iron body with bronze mountings (IBBM) recommended for general use on steam, water, air, oil and gas ...
Manufactured by:Cincinnati Valves Company (CVC) based inCincinnati, OHIO (USA)
This series of bolted bonnet Lunkenheimer gate valves are outside screw and yoke type with flanged ends. Two body-trim combinations: All-iron or iron body with bronze mountings (IBBM), the latter recommended for general use on steam, water, air, oil, and gas ...
Manufactured by:Cincinnati Valves Company (CVC) based inCincinnati, OHIO (USA)
Our High Performance Butterfly Valves are designed to seal against full line pressure rating of the valve body. The valves are suited for on/off, or throttling service in high pressure or vacuum applications with gases, liquids, slurries, and semi-solid ...