- Home
- Equipment
Refine by
Certifier Environmental Equipment & Supplies
11 equipment items found
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
Full-feature gas flow analyzer system capable of testing most types of ventilators plus other medical equipment. The 4080 Certifier FA+ System is made up of a 4081 Certifier FA+ High-Flow Module Kit and an 4088 Certifier FA+ Interface Display Module ...
Manufactured by:Sensidyne, LP based inSt. Petersburg, FLORIDA (USA)
SensAlert ASI - Advanced Safety Integrity – The best solution for gas detection in critical safety applications. SensAlert ASI provides enhanced protection and dependability for critical safety applications where personnel, processes, and facilities are at risk. The third-party certified SIL-2 SensAlert ASI offers dependability and versatility while remaining the easiest to install, ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
TSI's Model 8392 CERTIFIER Air Velocity Calibrator gives you reliable and convenient in-house calibrations at a reasonable cost. You can have the confidence of high accuracies over a wide velocity range with the CERTIFIER Air Velocity Calibrator. It enables you to calibrate your probed air velocity meters or transducers at velocities as low as 30 ft/min (0.15 m/s) and as high as 9000 ft/min (45 ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
The 4076 Certifier FA High Flow Module is one half of the 4070 Certifier FA System. The flow module contains the calibrated sensors and communicates the measurements to the interface display module. A flow module (4076 High Flow Module or 4072 Low Flow Module) must be used in conjunction with the 4078 Certifier FA Interface Display Module. A 4076 may be purchased alone (not as part of a 4070 ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
Display Module, to work with either the Certifier FA+ High Flow Module 4081 or the Certifier FA+ Low Flow Module 4082. The 4088 Certifier FA+ Interface Display Module is one half of the 4080 Certifier FA+ System. The interface module must be used in conjunction with a flow module (4081 High Flow Module or 4082 Low Flow Module). The interface module is used to operate the Certifier FA+ and display ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
Display Module, to work with either the Certifier FA High Flow Module 4076 or the Certifier FA Low Flow Module 4072. The 4078 Certifier FA Interface Display Module is one half of the 4070 Certifier FA System. The interface module must be used in conjunction with a flow module (4076 High Flow Module or 4072 Low Flow Module). The interface module is used to operate the Certifier FA and display ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
Low-cost flow analyzer system capable of testing multiple parameters of ventilator performance. The 4070 Certifier FA System is made up of a 4076 Certifier FA High-Flow Module Kit and an 4078 Certifier FA Interface Display Module ...
Manufactured by:Atex Certified, by MM Group based inZabkowice Slaskie, POLAND
The XD10TTAM/Ex Detector (MM 1007 Ex) is a combined detector consisting of three detection technologies. It uses two PIR sensors and one microwave detector. The range of the microwave detector is adjustable from 0 m to 15 m, while the PIR range is fixed at 10 m. The detection range can be adjusted by changing the microwave detection ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
The 4081 Certifier® FA+ High Flow Module is one half of the 4080 Certifier® FA+ System. The flow module contains the calibrated sensors and communicates the measurements to the interface display module. A flow module (4081 High Flow Module or 4082 Low Flow Module) must be used in conjunction with the 4088 Certifier® FA+ Interface Display Module. A 4081 may be purchased alone (not as ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
The 4082 Certifier® FA+ Low Flow Module can be used with the 4080 Certifier® FA+ System, in place of a 4081 Certifier® FA+ High Flow Module. Flow modules contain the calibrated sensors and communicate the measurements to the interface display module. A flow module (4082 Low Flow Module or 4081 High Flow Module) must be used in conjunction with the 4088 Certifier® FA+ Interface ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
The 4072 Certifier FA Low Flow Module can be used with the 4070 Certifier FA System, in place of a 4076 Certifier FA High Flow Module. Flow modules contain the calibrated sensors and communicate the measurements to the interface display module. A flow module (4072 Low Flow Module or 4076 High Flow Module) must be used in conjunction with the 4078 Certifier FA Interface Display ...