- Home
- Equipment
Refine by
Covercat Environmental Equipment & Supplies
12 equipment items found
Manufactured by:CoverCat Equipment Ltd. based inStockton-on-Tees, UNITED KINGDOM
The CoverCat 452 is the largest most powerful plural component spray system made by CoverCat and has no equal in capacity or capability. A high volume, heavy duty spray system with cart mounted 55 Gallon (200litre) Feed drums. The System is regularly used in Shipyards and supplies up to 6 spray guns on indiviual hoses to 500feet (150 meters) from the unit. It has been extensively employed ...
Manufactured by:CoverCat Equipment Ltd. based inStockton-on-Tees, UNITED KINGDOM
Compact single component spraying.Single Component Pneumatic Airless Spray Unit mounted on 2 wheel cart unit. Standard unit is 73:1 ratio and powered by a CoverCat 290 Air Motor. Maximum fluid delivery 232cc/cycle 9.2ltr/min (2.5gpm) @40cycles. Single Gun or Multiple Gun application of Pre-mixed Coatings. The units are capable of spraying a wide range of materials of differing mix ratio’s ...
Manufactured by:CoverCat Equipment Ltd. based inStockton-on-Tees, UNITED KINGDOM
The CoverCat 302F ATEX is a available as a standard IP65 Industrial Electrical Specification unit or as an ATEX Zone 2 certified system Eex d 2C T3 (200C) IP64. The 302F is a small, basic, simple to use Plural Component Spray machine for Solvent Free Passive Fire Protection Epoxy Materials. This spray machine is suited to general applications, patch and repair spray with added use as a batch ...
Manufactured by:CoverCat Equipment Ltd. based inStockton-on-Tees, UNITED KINGDOM
The CoverCat 352F System is compact, mobile and simple to use being most suited to small and medium sized applications and can replace Single Pack application where solvent addition would have been ...
Manufactured by:CoverCat Equipment Ltd. based inStockton-on-Tees, UNITED KINGDOM
The CoverCat series of In Situ Spray Lining Machines have been developed for internal coating and renovation of new and existing pipeline systems. The machine may be utilised on vertical and horizontal pipes and may also apply coatings to a pipe including a bend upto a radius of 2D and a 22.5degree curve. The CoverCat 302TP -500 lining machine is suited for coating of small diameter pipelines, ...
Manufactured by:CoverCat Equipment Ltd. based inStockton-on-Tees, UNITED KINGDOM
The Covercat 900 Series Pipe Snake has been developed to fulfil the need for pipe coating, repair & inspection tool which is able to negotiate tight corners, in any direction, and able to climb and descend inclines. The Pipe Snake is driven through the pipe by three independent drive units coupled together. Each drive unit has independent suspension that allows it to automatically adjust to ...
Manufactured by:CoverCat Equipment Ltd. based inStockton-on-Tees, UNITED KINGDOM
The CoverCat 290-H has a unique 5 in 1 option to include Hot, Cold, Chemical, Wet Abrasive Blasting and Paint Spraying all from the same unit. The system is mounted on a heavy duty four wheel cart base unit with integral forklift pockets. The cart has a pull bar & steering wheels. A four leg Lifting Frame is installed with de-mountable lifting bar having two lift eyes with 20mm pin location. ...
Manufactured by:CoverCat Equipment Ltd. based inStockton-on-Tees, UNITED KINGDOM
The CoverCat 352F System is compact, mobile and simple to use being most suited to small and medium sized applications and can replace Single Pack application where solvent addition would have been ...
Manufactured by:CoverCat Equipment Ltd. based inStockton-on-Tees, UNITED KINGDOM
CoverCat produces the largest 450 series units for application of high volumes of PFP materials in the largest of fabrication facilities. The system uses 3 phase electrical power at 220V or 400/440V ( to be specified).Hose lengths to 60 metres plus remote mix manifold. ...
Manufactured by:CoverCat Equipment Ltd. based inStockton-on-Tees, UNITED KINGDOM
Hot and cold pressure washing equipment for industrial and marine locations. The Pressure Washing Equipment is specifically designed for use in Industrial and Marine locations where electrical and diesel-powered equipment cannot easily be used. The systems are mounted on a heavy duty four wheel cart base with integral forklift pockets and lift frame options.Hot water and cold water versions ...
Manufactured by:CoverCat Equipment Ltd. based inStockton-on-Tees, UNITED KINGDOM
CoverCat offer a wide range of Single and Plural Component Spray Equipment, offering a wide range of pressure ratios. The CoverCat 300-73 Pump Unit offers 73:1 Pressure ratio with delivery volume of 4.6ltr/min @ 20 ...
Manufactured by:CoverCat Equipment Ltd. based inStockton-on-Tees, UNITED KINGDOM
Create a New pipe within the old cracked or leaking pipe without any major building reconstruction or renovation requirements. An innovative system for lining small diameter pipe in-situ within buildings and other sub surface work areas. Lining can be carried out in vertical and horizontal pipes and also in bends, tees and intersections upto 30metres (100feet) at each lining. The minimum pipe ...