- Home
- Equipment
Refine by
Cypress Envirosystems Environmental Equipment & Supplies
6 equipment items found
Manufactured by:Cypress Envirosystems based inSan Jose, CALIFORNIA (USA)
Gathers, stores, distributes, and presents wireless data, plus alarm notifications on excursions.The Cypress Envirosystems Blue Box Server (BBS) is an industrial server that collects data from Cypress Envirosystems field devices and enables access to data from a variety of users and ...
Manufactured by:Cypress Envirosystems based inSan Jose, CALIFORNIA (USA)
Many facilities have mandates to reduce energy use (e.g. 5% reduction from prior year). Most unfortunately do not have any baseline data from prior years to compare to, and must install instrumentation and record the necessary data. This can be an expensive and time consuming exercise to install new transducers, run wires, create drawings, connect I/O panels, and configure ...
Manufactured by:Cypress Envirosystems based inSan Jose, CALIFORNIA (USA)
Non-invasively retrofit analog pressure/temperature gauges for remote monitoring.Analog dial gauges which measure pressure, temperature and airflow are found in virtually every facility monitoring compressors, chillers, air handling units, coolant loops etc. In older buildings, gauges may be the only instrumentation available, and technicians are required to perform regular “rounds” ...
Manufactured by:Cypress Envirosystems based inSan Jose, CALIFORNIA (USA)
Legacy pneumatic thermostats generate no data, so building operators are blind to the issues that exist behind walls. The terminal units may have stuck actuators or the dampers may be oscillating, but no one knows because there is no information available. These problems often persist until a hot/cold call from an unhappy occupant triggers an investigation. SMARTPneumatics makes it possible for ...
Manufactured by:Cypress Envirosystems based inSan Jose, CALIFORNIA (USA)
The WPT-DB enables two set points to be programmed instead of one set point For example, heating could be programmed for 68° and cooling could be programmed for 78°, The thermostat would not call for heating or cooling when the ambient temperature is between these two setpoints, The thermostat would call for cooling when the ambient temperature rises above 78°, The thermostat would ...
Manufactured by:Cypress Envirosystems based inSan Jose, CALIFORNIA (USA)
Non-invasively read mechanical odometers and/or LED/LCD numeric indicators and wirelessly transmit the data to a PC, data acquisition or automation system. Digital displays which show total hours, pressure, temperature and other process indicators are found in virtually every facility monitoring critical instrumentation. In older buildings, local displays may be the only instrumentation ...