- Home
- Equipment
Refine by
Fci Environmental Equipment & Supplies
66 equipment items found
Premium
Manufactured by:Fluid Components International LLC. (FCI) based inSan Marcos, CALIFORNIA (USA)
FCI AS-TE is a compact, light-weight, precision temperature sensor for direct installation into piping and ducting on commercial and military fixed wing or rotary aircraft as well as spacecraft, vehicles and shipboard/marine vessels. These elements utillize high accuracy, highly repeatable RTD sensors (Resistance Temperature Detectors) to provide a linear change in resistance directly ...
Premium
Manufactured by:Fluid Components International LLC. (FCI) based inSan Marcos, CALIFORNIA (USA)
Prevents "wet" gas liquid droplets, such as rain or condensation, from contacting the sensor surface and causing incorrect flow ...
Premium
Manufactured by:Fluid Components International LLC. (FCI) based inSan Marcos, CALIFORNIA (USA)
Features the same output signals offered in the gas meter (listed above) with an adjustable insertion length using a removable compression fitting. Ideal for air applications, particularly HVAC duct installations. Standard input power is 9 to 36 Vdc. Wetted parts are 300 series stainless steel with a nylon or stainless steel compression fitting ...
Premium
Manufactured by:Fluid Components International LLC. (FCI) based inSan Marcos, CALIFORNIA (USA)
The Model AS-LLE is a miniature, single-point level sensor for detecting and alarming on liquid levels in tanks, reservoirs, sumps and gearboxes on commercial and military fixed wing and rotary aircraft. Unlike ordinary level sensor that installed through a tap point in a vessel and protrude both into and out from the vessel, the AS-LLE is designed to be installed within the vessel itself. ...
Premium
Manufactured by:Fluid Components International LLC. (FCI) based inSan Marcos, CALIFORNIA (USA)
Features a pigtail connection and remote 4-wire control board that is ideal for small/confined vessels and difficult to access locations. Typical flow applications include lube oil monitoring, cooling water detection, air flow and/or leak detection and analyzer sample flow verification. Wetted parts are 300 series stainless steel. CPVC with 300 series stainless steel or Hastelloy C-22 sensors ...
Premium
Manufactured by:Fluid Components International LLC. (FCI) based inSan Marcos, CALIFORNIA (USA)
Provides simple disassembly and assembly convenience in single or multiple flow/level or flowmeter ...
Premium
Manufactured by:Fluid Components International LLC. (FCI) based inSan Marcos, CALIFORNIA (USA)
The FLT93C insertion and inline type flow switch is specifically designed for use in sanitary and hygienic process applications. Its 20Ra finish, available with either mechanical polish or electro-polish finishing, is suitable for applications in food, beverage, pharmaceutical and other clean processes. FCI is the only thermal manufacturer providing temperature compensation to ensure set point ...
Premium
Manufactured by:Fluid Components International LLC. (FCI) based inSan Marcos, CALIFORNIA (USA)
Features 4 to 20mA scalable for flow or temperature, 0 to 10 Vdc scalable for flow or temperature and pulse outputs. Independent signals can also be configured for alarms and/or totalizing. Typical applications include compressed air, low pressure aeration and HVAC applications, nitrogen/carbon dioxide blanketing, and natural gas fuel flow. Standard input power is 9 to 36 Vdc. Wetted parts are ...
Premium
Manufactured by:Fluid Components International LLC. (FCI) based inSan Marcos, CALIFORNIA (USA)
FCI provides multipoint liquid level and interface switches that include a “strip sensor” or a thermowell mounted sensing element with integral or remote electronics that provide indication of presence or absence of liquid or interface at the multiple sensor locations along the length of the element. The multipoint liquid level element is directly installed into tanks, reservoirs, ...
Premium
Manufactured by:Fluid Components International LLC. (FCI) based inSan Marcos, CALIFORNIA (USA)
The ST75 Series thermal flow meters are a compact, low cost solution for accurate, repeatable direct mass flow measurement of air and gases. These in-line (spool-piece) style flow meters have no moving parts and are available for use in pipe diameters from 1/4 inches to 2 inches, [6 mm to 51 mm]. Process connection options include male NPT, female NPT, and flanged. These thermal flow meters ...
Premium
Manufactured by:Fluid Components International LLC. (FCI) based inSan Marcos, CALIFORNIA (USA)
Key Features and Applications: True Continuous Level. Continuous Level + Point Level Hybrid (CL86 Plus). Up to 55 ′ [16,7 m] Length. Wet or Dry Detection. Custom Flex Joint Design Solves. Installation Challenges. VeriCal In-situ Calibration Verification ...
Premium
Manufactured by:Fluid Components International LLC. (FCI) based inSan Marcos, CALIFORNIA (USA)
ST80 is a high performance, rugged thermal dispersion technology air/gas flow meter that combines ultra-reliable, feature-rich electronics, and FCI innovations such as Adaptive Sensing Technology (AST) with the industry's most extensive selection of application-matched flow sensors, including FCI's patented "FPC" sensor for compressed air and new "wet gas" flow element, to provide a truly ...
Premium
Manufactured by:Fluid Components International LLC. (FCI) based inSan Marcos, CALIFORNIA (USA)
FCI provides temperature transmitters mounted in thermowells with integral or remote solid state electronics housed in protective hermetically or environmentally sealed enclosures for direct installation into piping and ducting on commercial and military aircraft, spacecraft, vehicles and marine applications. These transmitters utilize highly reliable Resistance Temperature Detector (RTD) ...
Premium
Manufactured by:Fluid Components International LLC. (FCI) based inSan Marcos, CALIFORNIA (USA)
The FLT93S insertion type FlexSwitch for flow and temperature monitoring represents the first true technological breakthrough in thermal technology in over a decade. This product was designed for heavy industrial environments including high temperature and high pressure. FCI is the only thermal manufacturer providing temperature compensation to ensure set point accuracy for process temperatures ...
Premium
Manufactured by:Fluid Components International LLC. (FCI) based inSan Marcos, CALIFORNIA (USA)
The FS10i is a universal flow switch and flow monitor designed for simple insertion into ½” (13mm) or larger diameter pipes and square ducts. The unit is suitable for either liquid or air/gas applications. It is fast responding and highly repeatable to both increasing and decreasing flow rate changes. The standard 1A relay trip point is easily set in the field for low or high trip ...
Premium
Manufactured by:Fluid Components International LLC. (FCI) based inSan Marcos, CALIFORNIA (USA)
Features an integral flow conditioner for installations with limited straight run of piping as well as analog or pulse outputs to totalize gas consumption. Ideal for skid mounted packages where straight run and space are limited. Typical applications include fuel gas flow measurement, compressor leak detection and compressor fuel gas consumption. Wetted parts are 300 series stainless ...
Premium
Manufactured by:Fluid Components International LLC. (FCI) based inSan Marcos, CALIFORNIA (USA)
The Model ST50 is a compact, low cost solution for accurate, repeatable flow rate measurement of air, compressed air or nitrogen. This insertion-style flow meter has no moving parts and is available in probe lengths for installation into pipe diameters from 2.5 inches to 24 inches [63 mm to 610 mm]. It is easily connected into the pipe via a 1/2 inch or 3/4 inch NPT compression ...
Premium
Manufactured by:Fluid Components International LLC. (FCI) based inSan Marcos, CALIFORNIA (USA)
The MT100 Series is an insertion type, multipoint thermal flow meter specifically designed for large diameter pipes, such as stacks, industrial chimneys, and flues, and large rectangular ducts, such as air feed intakes and HVAC. These large pipe/duct applications are difficult for ordinary flow meters because of distorted flow profiles and lack of straight-run that can lead to inaccurate and ...
Premium
Manufactured by:Fluid Components International LLC. (FCI) based inSan Marcos, CALIFORNIA (USA)
FCI provides flow transmitters that include a thermowell mounted sensing element and integral or remote electronics that accurately indicate flow rate at the sensing location. The flow element is directly installed into piping or ducting on commercial and military aircraft, spacecraft, vehicles and marine applications. Please complete and submit the attached Application Data Sheet or contact ...
Premium
Manufactured by:Fluid Components International LLC. (FCI) based inSan Marcos, CALIFORNIA (USA)
FCI Model AS-LLS is a no moving parts, ultra-reliable level switch which detects the presence or absence of liquid or interface at the sensing location. The AS-LLS level switch is directly installed into tanks, reservoirs, sumps and gearboxes on commercial and military aircraft, as well as spacecraft, vehicles and marine applications. The sensor uses FCI proven thermal dispersion technology to ...