- Home
- Equipment
Refine by
Fm Environmental Equipment & Supplies
26 equipment items found
Manufactured by:Canada Filtration Material Inc based inMarkham, ONTARIO (CANADA)
High pressure automatic filter ...
Manufactured by:Canada Filtration Material Inc based inMarkham, ONTARIO (CANADA)
Fully automatic membrane filter ...
Manufactured by:Fleximake PTY Ltd based inDandenong South, AUSTRALIA
Cable Cover – ideal for Tile, Laminate/Timber Floor 50mm(width) Black. Cost efficient office/pedestrian cable protectors for stage, home, office or industry. Lightweight simple solution for covering electrical, computer cables on Timber, Laminate or tile floor or You can run above / underneath the ...
Manufactured by:Fleximake PTY Ltd based inDandenong South, AUSTRALIA
We will customize your product without any additional charges providing no extra materials and/or fittings are required. ...
Manufactured by:Canada Filtration Material Inc based inMarkham, ONTARIO (CANADA)
Model Number: SCP-111. Size (mm): 1210*2420MM,600*1220MM, other size as your request. Weight (g/m2): 1100-1200. Thickness (mm): 3.7-4.0. Flow Rate: (p0.03bar s.50ml. 10cm), 50”–1’30”. Density (g/cm³): 0.29. Bursting Strength Wet (kpa): ≥950. Shape: we can cut hole as your request. Ash ...
Manufactured by:Canada Filtration Material Inc based inMarkham, ONTARIO (CANADA)
Model Number: SCK-111. Size(mm): 1210*2420MM,600*1220MM, other size as your request. Weight(g/m2): 1100-1200. Thickness(mm): 3.7-4.0. Flow Rate (p0.03bar s.50ml. 10cm), 50”–1’30”. Density(g/cm³): 0.29. Bursting Strength Wet (kpa): ≥950. Shape: we can cut and hole as your request. Ash(%): ...
Manufactured by:Canada Filtration Material Inc based inMarkham, ONTARIO (CANADA)
Model Number: SCP-336. Size(mm): 1210*2420MM,600*1220MM, other size as your request. Weight (g/m2): 1450-1600. Thickness (mm): 3.6-3.8. Flow Rate (p0.03bar s.50ml. 10cm): 50′-70′. Density (g/cm³): 0.42. Bursting Strength Wet (kpa): ≥180. Shape: we can cut and hole as your request. Ash (%): 47. Micron Rating (μm): ...
Manufactured by:Fluid Management Systems, Inc. (FMS) based inBillerica, MASSACHUSETTS (USA)
After 30 years of leading automation in the field of Dioxin & PCBs analysis, FMS introduces EZprep 123 to further simplify the dioxin sample preparation process and make it easier to perform. The EZprep 123’s impressive performance allows Dioxin labs to reduce turnaround time and increase quality of the analysis while reducing the ...
by:FM Environmental Ltd. based inNewwry, NORTHERN IRELAND
The Mobile Biosam is specifically designed for temporary sites which would require frequent mobilization from one site to another. The plant works on the well-proven submerged aerated filter process, and is readily packaged for quick installation, ease of mobility and minimal operator ...
Manufactured by:Canada Filtration Material Inc based inMarkham, ONTARIO (CANADA)
Filter Cloth is very important for the filtration performence; in order to achieve better requirements, we have a complate set of German filter cloth production line and technology, the heavy German rapier looms weave the thinnest silk threads into filter cloth of high density and different hole patterns by using 0.3-3.5 tons beating-up force after each weft across warp. under same area the ...
Manufactured by:Fluid Management Systems, Inc. (FMS) based inBillerica, MASSACHUSETTS (USA)
Sample cleanup is a very important step because methods often don’t respond to the analyte in its in-situ form, or the results can be distorted by interfering species. Column cleanup is used to eliminate interferences that can occur in the sample matrices. Multi-column cleanup procedures use multiple column chemistries to remove interferences and fractionate analytes of interest from ...
Manufactured by:Fluid Management Systems, Inc. (FMS) based inBillerica, MASSACHUSETTS (USA)
Imagine performing the Sample Cleanup process for POPs analysis in liquids and solids automatically in as little as 30 minutes. Built on 25 years of FMS, Inc. experience and technology that has processed millions of Dioxin samples, FMS introduces a new family of integrated, economical sample cleanup systems that combine manual sample prep steps into one automated process. The EP-110 systems ...
Manufactured by:Fluid Management Systems, Inc. (FMS) based inBillerica, MASSACHUSETTS (USA)
Solvent evaporation/concentration is a critical step in the sample preparation process used by the clinical, food, environmental, pharmaceutical, chemical, and biotechnology industries. Because so many different types of samples and solvents are used for evaporation or concentration, no single technique can provide a universal solution. Over the years, many evaporation and concentration systems ...
Manufactured by:Fluid Management Systems, Inc. (FMS) based inBillerica, MASSACHUSETTS (USA)
Solvent evaporation/concentration is a critical step in the sample preparation process used by the clinical, food, environmental, pharmaceutical, chemical, and biotechnology industries. Because so many different types of samples and solvents are used for evaporation or concentration, no single technique can provide a universal solution. Over the years, many evaporation and concentration systems ...
Manufactured by:Fleximake PTY Ltd based inDandenong South, AUSTRALIA
Good Multi-sport event as well as sailing regattas, conical marker buoys are a classic shaped ocean marker. This style has been used for decades to mark no boating zones that flank shipping ...
Manufactured by:Canada Filtration Material Inc based inMarkham, ONTARIO (CANADA)
Fully automatic and manual filter ...
Manufactured by:Canada Filtration Material Inc based inMarkham, ONTARIO (CANADA)
Automatic filter press for water ...
Manufactured by:Canada Filtration Material Inc based inMarkham, ONTARIO (CANADA)
Fully automatic membrane filter ...
Manufactured by:Canada Filtration Material Inc based inMarkham, ONTARIO (CANADA)
Model Number: SCP-112. Size (mm): 1210*2420MM,600*1220MM, other size as your request. Weight (g/m2): 950-1000. Thickness (mm): 3.4-3.6. Flow Rate (p0.03bar s.50ml. 10cm): 50”-1’30”. Density (g/cm³): 0.28. Bursting Strength Wet(kpa): ≥900. Shape: we can cut and hole as your request. Ash (%): ...
Manufactured by:Canada Filtration Material Inc based inMarkham, ONTARIO (CANADA)
Model Number: SCP-334. Size (mm): 1210*2420MM,600*1220MM, other size as your request. Weight (g/m2): 1480-1600. Thickness (mm): 3.6-4.0. Flow Rate (p0.03bar s.50ml. 10cm): 30′–40′. Density (g/cm³): 0.41. Bursting Strength Wet (kpa): ≥180. Shape: we can cut and hole as your request. Ash (%): 44. Micron Rating (μm): ...