- Home
- Equipment
Refine by
Fluidyne Environmental Equipment & Supplies
26 equipment items found
Manufactured by:FluiDyne based inFraser, MICHIGAN (USA)
Our balanced vane motors are not only compact and efficient, but they have the ability to provide variable speed, variable horsepower, and constant torque. They offer speeds to 2200 rpm at maximum ...
Manufactured by:Fluidyne Corporation based inCedar Falls, IOWA (USA)
The ISAM is a total treatment system incorporating BOD, TSS and nitrogen removal along with sludge reduction in an integrated system. Raw (crude) sewage enters a covered anaerobic reactor for pretreatment, sludge thickening and sludge destruction. Complex organic solids undergo hydrolysis to simpler soluble organics which pass to the surge anoxic mix (SAM) ...
Manufactured by:Fluidyne Corporation based inCedar Falls, IOWA (USA)
Fluidyne replaced existing surface rotors and mixers with jet aeration / mixing equipment. The upgrade improves nitrogen and phosphorous removal and increasing the organic and hydraulic loading capability through the process while saving ...
Manufactured by:Fluidyne Corporation based inCedar Falls, IOWA (USA)
Fluidyne is the first company to commercially design, build and operate SBR technology based on the activated sludge process with over 300 plants operating worldwide. Our intimate process knowledge in biological treatment has led to reducing solid content through biological means. The ISAM sludge reduction system from Fluidyne Can be used as a side stream process in an existing plant to reduce ...
Manufactured by:FluiDyne based inFraser, MICHIGAN (USA)
FluiDyne's A4V piston pump are in stock and ready to ship. We carry a complete line of A4V piston pumps that are available in displacement of 40, 71, 125, 180, 250. Pressure controls include pressure only, remote pressure, pressure & flow, and horsepower limiting, Side porting, Metric and SAE mounting. Controls include: DR, DRG, FR, FRG, DFR, and ...
Manufactured by:FluiDyne based inFraser, MICHIGAN (USA)
FluiDyne A10V piston pumps (-31 design) Variable Displacements are available in displacements 18 cm3/rev to 140 cm3/rev (0.61 in3/rev to 8.54 in3/rev), pressures to 280 bar (4000 psi) nominal, single pump or thru drive pumps, Pressure controls include pressure only, remote pressure, pressure & flow, and horsepower limiting, Side or Rear porting, Metric and SAE ...
Manufactured by:FluiDyne based inFraser, MICHIGAN (USA)
FluiDyne vane pumps are rated up to 2000 psi and 1800 rpm. They are offered in drop-in replacement on flange mounting (V210), foot mounting (V214) and face mounting (V230) with Buna or Viton seals. The V200 Series has a robust dual shaft bearing design and double lipped shaft seals. Shafts are available in straight keyed long (standard), short, male threaded shaft end and spline. Other shafts are ...
Manufactured by:FluiDyne based inFraser, MICHIGAN (USA)
Our VTM42 power steering pumps are for mobile use. They have high efficiency. Available in ring sizes: 10, 15, 20, 40, 50, and 60. Threaded (VTM42 only) and splined (VTM42A only) shafts are also available. Our VTM42 vane pumps are ready for immediate shipment and offer 18 month ...
Manufactured by:Fluidyne Corporation based inCedar Falls, IOWA (USA)
Fluidyne Jet mixers can be used in a wide variety of wastewater applications including flow equalization basins, CSO tanks, anoxic reactors, anaerobic digesters, SBRs, oxidation ditches and flash mix tanks. Fluidyne’s jet mixing systems are simple, cost effective and available for new installations or for retrofit in existing tanks. ...
Manufactured by:FluiDyne based inFraser, MICHIGAN (USA)
FluiDyne’s gear pumps are well suited for both industrial and mobile applications. Available in SAE AA. Displacements from .04 in3/rev to .82 in3/rev., Single Pumps, pressures to 3600 psi and speeds to 4000 ...
Manufactured by:Fluidyne Corporation based inCedar Falls, IOWA (USA)
Fluidyne FFP Cloth Media Plate Filters remove suspended solids as small as 10 micron and can be configured for flows ranging from 10,000 to 1,200,000 GPD per unit. Units are offered in completely assembled 100% SS free-standing packages, or as modules for retro-fit into new or existing concrete ...
Manufactured by:Fluidyne Corporation based inCedar Falls, IOWA (USA)
Fluidyne’s Hydro-Grit grit vortex system removes sand and inorganic material before the wastewater treatment process. Historically one of our most popular and effective products, the high efficiency Hydro-Grit offers the same advantages as the standard Hydro-Grit with improved grit removal efficiencies. Performance data through the high-efficiency unit has shown 95% removal of all grit 74 ...
Manufactured by:Fluidyne Corporation based inCedar Falls, IOWA (USA)
The Hydro-Grit Classifier is designed for the separation, dewatering and removal of settleable inorganic material typically at the inlet/headworks of a municipal or industrial wastewater treatment ...
Manufactured by:FluiDyne based inFraser, MICHIGAN (USA)
Our motor adapts the Geroler gear set design with high speed distribution of flow and high pressure. It offers a perfect compromise between price and performance by producing a high torque motor at a reasonable price. Our 500-Series motors are available in the following displacements: 125, 160, 200, 230, 250, 300, 350, 375, 475, 540 and 750. The motors are bi-directional and interchangeable with ...
Manufactured by:FluiDyne based inFraser, MICHIGAN (USA)
FluiDyne A10V10 piston pump (52 design) Variable Displacement are available in a uniquely small displacement 10 cm3/rev (0.61 in3/rev). Pressures to 250 bar (3600 psi) nominal with speeds as high as 3600 rpm. Multiple control options include pressure only (DR), remote pressure (DRG), and pressure & flow (DFR(1)). Both Metric or SAE mount and Rear Porting are standard on this ...
Manufactured by:FluiDyne based inFraser, MICHIGAN (USA)
FluiDyne A10V -52/53 design piston pump Variable Displacements are available in displacements 28 cm3/rev to 63 cm3/rev (1.71 in3/rev to 3.84 in3/rev), pressures to 315 bar (4500 psi) nominal, single pump or thru drive pumps, Pressure controls include pressure only, remote pressure, pressure & flow, and horsepower limiting, Side or Rear porting, Metric and SAE ...
Manufactured by:Fluidyne Corporation based inCedar Falls, IOWA (USA)
Fluidyne was the first company in the US to promote the SAM product. It is at the top of our mainstay reliable products. The newest Fluidyne wastewater treatment systems incorporate a surge/anoxic mix (SAM) tank to control the process and provide rapid and complete treatment. The Surge Anoxic Mix (SAM) System integrates anoxic and aerobic processes for energy efficient BOD, TSS and nutrient ...
Manufactured by:Fluidyne Corporation based inCedar Falls, IOWA (USA)
Fluidyne’s floating decanter removes supernatant off the top of the tanks in various water and wastewater applications. It is ideal for decanting water from lagoons, digesters, equalization basins, aeration basins and SBRs. The decanter is an all hydraulic design. It floats up and down with changing water levels and can remove liquid levels down to a few feet above the tank floor. ...
Manufactured by:FluiDyne based inFraser, MICHIGAN (USA)
FluiDyne vane pumps are rated up to 2000 psi and 1800 rpm. They are offered in drop-in replacement on flange mounting (V210), foot mounting (V214) and face mounting (V230) with Buna or Viton seals. The V200 Series has a robust dual shaft bearing design and double lipped shaft seals. Shafts are available in straight keyed long (standard), short, male threaded shaft end and spline. Other shafts are ...
Manufactured by:Fluidyne Corporation based inCedar Falls, IOWA (USA)
Jet aspiration is a simple, efficient and cost effective solution to wastewater treatment and mixing problems. Liquid from the tank is pumped through a specially designed double nozzle assembly which aspirates air into the mixing section. The combined air/liquid plume is then discharged below the surface to provide high oxygen transfer and off-bottom solids ...