- Home
- Equipment
Refine by
Geko Environmental Equipment & Supplies
10 equipment items found
Manufactured by:Gwarant-Eko GEKO Filtration Sp. z o.o. based inKonskie, POLAND
PPS (polyphenylene sulfide) needle felt is used in a dry industrial filtration in chemically aggressive environment where the temperature does not exceed 200°C. Maximum working temperature of this material is 190°C. When using this needle felt, it is important to know the exact composition of the exhaust gases, especially oxygen O2 as well as nitrogen oxides (NOx, NO2). It is a very good ...
Manufactured by:Gwarant-Eko GEKO Filtration Sp. z o.o. based inKonskie, POLAND
Filter bags made of glass fabric with PTFE membrane are used in filtration processes where the working temperature can reach 260-280°C. Glass fabric with PTFE membrane is generally used for dedusting of fumes filtration (boilers in power plants). This material has properties similar to those of needle felts made of 100% PTFE, but it is much more cost-effective. Note, however, that this ...
Manufactured by:Gwarant-Eko GEKO Filtration Sp. z o.o. based inKonskie, POLAND
PAN needle felt (Polyacrylonitrile, Dolanit ®) is used in dry industrial filtration in chemically aggressive environment where the temperature does not exceed 140°C. It exhibits excellent resistance to hydrolysis. ...
Manufactured by:Gwarant-Eko GEKO Filtration Sp. z o.o. based inKonskie, POLAND
PTFE needle felt (Teflon ®) is used in dry industrial filtration in chemically aggressive environments where the temperature reaches 280 °C. Highly resistant to any chemical mixtures in exhaust gases. ...
Manufactured by:Gwarant-Eko GEKO Filtration Sp. z o.o. based inKonskie, POLAND
PI needle felt (Polyimide, P.84®) is used in industrial dry filtration where the temperatures significantly exceed 200 ...
Manufactured by:Gwarant-Eko GEKO Filtration Sp. z o.o. based inKonskie, POLAND
Filter bags made of polyester needle felt with microporous PTFE membrane guarantee very high filtration efficiency. The PTFE membrane (on the dust side of the bag) stops the smallest particles thanks to its microporous structure. This allows the fine dust emissions to be reduced even to 1mg /m3. The membrane significantly lowers the air permeability, which is why the filter ratio should be lower ...
Manufactured by:Gwarant-Eko GEKO Filtration Sp. z o.o. based inKonskie, POLAND
MA needle felt (meta-Aramide, Nomex) finds use in dry industrial filtration when process temperatures exceed ...
Manufactured by:Gwarant-Eko GEKO Filtration Sp. z o.o. based inKonskie, POLAND
Polyester needle felts are the most commonly used material for the manufacture of filter bags. Low price, high quality and thermal resistance allow the use of this material in many filtration processes. Polyester is used for dedusting processes where the temperature reaches up to 150°C (Peaks even up to 160°C). Due to a wide range of applications this filter media can be delivered with ...
Manufactured by:Gwarant-Eko GEKO Filtration Sp. z o.o. based inKonskie, POLAND
Filter bags made of polyester needle felt with oil and water repellent finish are characterized by high efficiency in high humidity working conditions. If the dust is wet or the dedusting system is outdoors, it is important to protect the filter bag from moisture. Moist dust can lead to a so-called sticky dust cake, which settles on the filter bags surface and thus reduces air permeability and ...
Manufactured by:Gwarant-Eko GEKO Filtration Sp. z o.o. based inKonskie, POLAND
Filter bags made of polyester needle felt with oil and water repellent PTFE-based finish are characterized by immunity to acids, alkalis and hydrolysis in high humidity working conditions. The presence of PTFE is obtained by adding a polytetrafluoroethylene solution to the resin full bath. In addition to the regular oil and water-repellent properties, the filter media obtained is effective in a ...