- Home
- Equipment
Refine by
Geokon Environmental Equipment & Supplies
5 equipment items found
Manufactured by:Geokon Inc based inLebanon, NEW HAMPSHIRE (USA)
The Model 3400 Semiconductor Piezometers and Pressure Transducers are intended for dynamic measurements of fluid and/or pore water pressures in standpipes, boreholes, embankments, pipelines, pressure vessels, reservoirs, etc. They are also used for static pressure movement where the readout system is incompatible with vibrating wire type transducers. Three transducer output options are ...
Manufactured by:Geokon Inc based inLebanon, NEW HAMPSHIRE (USA)
The Model 3900 Embedment Strain Gage is designed for the measurement of dynamic strains in concrete structures, earth fills and soils. It comprises a full bridge strain gaged proving ring coupled, between two flanges, with a spring and shaft. When the flanges move relative to one another, the tension in the spring changes and hence the strain in the proving ring. A PVC tube serves as a protective ...
Manufactured by:Geokon Inc based inLebanon, NEW HAMPSHIRE (USA)
The Model 4400 Embedment Jointmeter is designed for use across construction joints, such as those between adjacent blocks in a concrete dam. It is normally embedded across the joint to monitor the expansion or contraction of the joint. The use of internal universal joints allows for a degree of shearing motion. ...
Manufactured by:Geokon Inc based inLebanon, NEW HAMPSHIRE (USA)
The Model 4600 Settlement System is designed for the remote measurement of surface or subsurface settlement in fills, surcharges, dams, embankments, etc. A borehole is drilled which allows a pressure transducer to be anchored to solid ground below the area of settlement. A fluid filled tube extends upward connecting the transducer to a reservoir which is located in the moving strata or fill. The ...
Manufactured by:Geokon Inc based inLebanon, NEW HAMPSHIRE (USA)
The Model 6101D MEMS Digital Tiltmeter is a low-cost, portable device designed to measure tilt in structures such as buildings, dams and embankments and also for measurements related to the stability of slopes, open pits and the walls of excavations (e.g. slurry walls). The sensing element is a highly accurate MEMS (Micro-Electro-Mechanical Systems) tilt sensor, which communicates with the Model ...