- Home
- Equipment
Refine by
Hr Environmental Equipment & Supplies
23 equipment items found
Manufactured by:Hoses Technology S.P.A. based inBellusco (MB), ITALY
Long lenght rubber hose suitable for delivery of compressed air. Temp: -30°C + ...
Manufactured by:HRS Heat Exchangers Ltd. based inWatford, UNITED KINGDOM
The HRS C Series is a complete stainless steel shell and tube heat exchanger designed for industrial use, based on our K Series but with smaller tubes making the unit more compact. The product flows through the inner tubes and the service fluid flows through the surrounding shell. The HRS C Series is an ideal heat exchanger for steam-to-water applications such as CIP heating and low viscosity ...
Manufactured by:Hydro Response Ltd based inNorth Canterbury, NEW ZEALAND
This version of our barriers is outstanding in its simplicity, low cost, and speed. No tools are needed; one person can easily deploy this barrier to protect a home. With two 45- degree corner units, it can swiftly turn a corner. The same steel sheet connection to the supports is used, along with the membrane and chains to provide the waterproofing. The ELEMENTAL systems are non-extendable and ...
Manufactured by:HRS Heat Exchangers Ltd. based inWatford, UNITED KINGDOM
The heat exchanger design process involves several steps: Analysing the application. Identifying the fluid properties. Solving the energy balance. Defining the heat exchanger geometry. Thermal design. Design interpretation. Mechanical ...
Manufactured by:HRS Heat Exchangers Ltd. based inWatford, UNITED KINGDOM
The HRS DTI Series is a complete stainless steel double tube heat exchanger designed for industrial applications. Because of its geometry the DTI Series is a true counter current heat exchanger; the product flows through the inner tube and the service fluid flows through the surrounding shell. Using our corrugation technology, both heat transfer and efficiency are increased over standard smooth ...
Manufactured by:HRS Heat Exchangers Ltd. based inWatford, UNITED KINGDOM
Based on the DTI Series, but with an adapted design for direct energy recovery (product vs product) for sludge with low viscosity. The inner tube is removable making it possible to inspect/clean both tube and shell side. It also allows for easier and faster cleaning consequently reducing operational downtime required for these high fouling products. The tube in tube concentric geometry makes it ...
Manufactured by:HRS Heat Exchangers Ltd. based inWatford, UNITED KINGDOM
The BPM Series is a mobile version of the standard BP Series pump. It is mounted on a mobile skid unit for easy movement, allowing it to be used across multiple production lines and locations, ideal for food manufacturers producing short runs of specialist products. With the BPM Series, customers can enjoy the benefits of a BP Series pump without the need to invest in a dedicated pump, resulting ...
Manufactured by:HR® Pharmaceuticals, Inc. based inYork, PENNSYLVANIA (USA)
HR® Lubricating Jelly 3g OneShot® is a sterile, single-use product designed to improve the application, minimize waste, and significantly reduce the risk of ...
Manufactured by:HRS Heat Exchangers Ltd. based inWatford, UNITED KINGDOM
HRS evaporation systems are designed for concentration of products from juices and purees to tomato and liquid cheese based products. Application dependant, we use our corrugated tube or Unicus scraped surface heat exchangers as the evaporator, in a forced recirculation setup. Multiple effect systems or use of mechanical or thermal vapour recompression can be supplied, increasing ...
Manufactured by:HRS Heat Exchangers Ltd. based inWatford, UNITED KINGDOM
HRS Asepticblock Series is a packaged pasteuriser/steriliser and aseptic filler in a compact skid for thermal treatment and aseptic filling within a wide range of products for the food industry, with the same characteristics in quality and aseptic reliability as bigger size ...
Manufactured by:Hydro Response Ltd based inNorth Canterbury, NEW ZEALAND
The Aqua-Barrier cofferdam is an inflated, water-filled barrier that is essential for dewatering construction sites or flood protection. Its unique internal baffle system ensures a stable product that is both environmentally-safe and durable.Compared to traditional water control methods that use small bags filled with water or sand, the Aqua-Barrier can be reused and repurposed for any ...
Manufactured by:HRS Heat Exchangers Ltd. based inWatford, UNITED KINGDOM
The HRS G Series is a complete stainless steel multitube heat exchanger designed specifically for exhaust gas cooling and thermal recovery applications. Similar to the HRS K Series, the exhaust gases flow through the interior tubes and the service fluid flows through the surrounding shell. Using our corrugation technology, heat transfer and efficiency are increased over standard smooth tube ...
Manufactured by:HRS Heat Exchangers Ltd. based inWatford, UNITED KINGDOM
The HRS K Series is a complete stainless steel shell and tube heat exchanger designed for industrial use. The product flows through the interior tubes and the service fluid flows through the surrounding shell. The K Series is an ideal heat exchanger for steam-to-water applications such as CIP heating. Using HRS corrugation technology, heat transfer and efficiency are increased over standard ...
Manufactured by:Badger Meter, Inc. based inMilwaukee, WISCONSIN (USA)
The High Resolution 8-dial Encoder (HR-E®) from Badger Meter uses a non-contact field-proven light emitting diode technology to provide a high resolution 8-digit reading while at the same time eliminating friction and wear of traditional mechanical encoders. The HR-E encoder communicates using the industry standard ASCII communication protocol to provide high resolution encoded ...
Manufactured by:Hydro Response Ltd based inNorth Canterbury, NEW ZEALAND
This is the most popular of the Geodesign barriers produced, having dam heights ranging from 61cm to 245 cm and with over 20 years on the market. The barrier is being used - and reused - by government agencies and companies across the world. The CLASSIC systems are extendable and manufactured in high strength galvanized steel and ...
Manufactured by:Hydro Response Ltd based inNorth Canterbury, NEW ZEALAND
This lightweight, low cost flood barrier was developed in 2015. Its innovative design means a quicker and easier deployment, increased forces to the ground, enhanced security and fewer components. As with our CLASSIC system, the PREMIUM system can be deployed manually, without the use of tools. The PREMIUM systems are non extendable and manufactured in high strength galvanized ...
Manufactured by:HRS Heat Exchangers Ltd. based inWatford, UNITED KINGDOM
Zero liquid discharge (ZLD) systems remove liquid waste streams from industrial plants and transform them into a cleaner liquid and with valuable solid by-products which can be sold or ...
Manufactured by:HRS Heat Exchangers Ltd. based inWatford, UNITED KINGDOM
Evaporation is an efficient way of reducing the volume of effluents and wastes. Our evaporation systems raise effluent to its boiling point so that water is evaporated and then condensed, thus obtaining a concentrated end product and water. Forced recirculation uses a pump to send the product through the evaporator at high speeds, ensuring high velocity, good heat transfer and minimal fouling. ...
Manufactured by:HRS Heat Exchangers Ltd. based inWatford, UNITED KINGDOM
HRS BP Series piston pumps are hydraulically or pneumatically operated positive displacement pumps that transfers mechanical energy to pressure. A hygienic design incorporates a separator fitted between the piston and the hydraulic chamber to ensure no contact between the product and the hydraulic oil. Once the pump is in operation, no part which comes into contact with oil comes into contact ...
Manufactured by:HRS Heat Exchangers Ltd. based inWatford, UNITED KINGDOM
The HRS BPSC Series is specifically designed for highly viscous materials such as pastes and particularly those which are produced and packed at low temperature. The product’s thickness can make it hard to prime the pump. To overcome this, the HRS BPSC uses a gravity-fed hopper, together with a screw conveyor, to feed product into the inlet of the pump. Once suction side has been filled, ...