- Home
- Equipment
Refine by
Huber Environmental Equipment & Supplies
72 equipment items found
Manufactured by:Huber+Suhner AG based inHerisau, SWITZERLAND
Key features: Omnidirectional antenna for Cellular bands from 1695 MHz till 6000 MHz. VSWR 1.5 in all bands with Vertical polarization. PIM better than -153 dBc at 2x43 dBm. Smart bracket system is included. Nex10 female ...
Manufactured by:Huber+Suhner AG based inHerisau, SWITZERLAND
Key features: Directional low gain 3x3 MIMO antenna for Wi-Fi bands between 5150 and 5935 MHz. Vertical and +/-45° polarisation for MIMO performance. Narrow beam width and very low directional gain to prevent interference. Three connector ports directly on the rear, 3 x QMA jack ...
Manufactured by:Huber+Suhner AG based inHerisau, SWITZERLAND
Key features: 19inches 1U size. Robust steel construction. Cable tie feature at rear. Telescopic drawer with tilt of 35°. Cable management bar at front. 4 individual sections. Storage function: 24 x 3 m cable with a diameter of 2.1 mm per section. Total storage capacity up to 96 x 3m cables. Adjustable lateral mounting ...
Manufactured by:Huber+Suhner AG based inHerisau, SWITZERLAND
Our CAT5 and CAT6 (Gigabit) data line protectors are Power over Ethernet (PoE) compatible and available as IP68 rated robust components for outdoor applications (i.e. backhaul microwave links) or in IP20 specified housings for indoor installations (i.e. data processing ...
Manufactured by:Engineering Services (Bridgend) Ltd. based inBridgend, UNITED KINGDOM
The Huber mobile depollution system is a self contained unit, size 6000mm x 2450mm x 2220mm high, the vehicle support has been proof load tested to 5.0 tonnes. Each unit is supplied complete with all the necessary tooling required to carry out the depollution of a vehicle and only requires the connection of compressed air and a 240 volt electrical supply. The fluid storage tanks are set within a ...
Manufactured by:Huber Technik based inErding, GERMANY
Huber and the vulcanising craft have been a successful unit since the company’s earliest history. We are still able to produce elastic articles from latest materials by this traditional ...
Manufactured by:Huber Technik based inErding, GERMANY
Our possibilities and experience in metal processing, coupled with our powers in elastic production, take full effect in making or repairing gummed ...
Manufactured by:Huber SE based inBerching, GERMANY
The STEP SCREEN® System is widely accepted and successful due to its function and easy-to-follow operation principle as well as the simple cleaning method without any aids (self-cleaning effect according to the counter-current principle). It is furthermore easy to maintain and able to handle extremely big screenings volumes whilst it also offers a high operational reliability. The motor ...
Manufactured by:Huber Instrumente AG based inNunningen, SWITZERLAND
Budget friendly, efficient, minimum space requirements the HT01 series is perfectly suitable for measuring over-, under- or differential-pressure of non aggressive ...
Manufactured by:Huber SE based inBerching, GERMANY
The HUBER Fine Screen ROTAMAT® Ro1 is completely made of stainless steel and acid treated in a pickling bath. These screens are either installed directly into the channels, or are supplied as tank-mounted units, with an inclination of 35°. The wastewater flows into the open end of the inclined screen basket and then through the screen. Floating and suspended materials are retained by the ...
Manufactured by:Hydroflux Pty Ltd based inSydney, AUSTRALIA
HUBER’s subsidiary in Sweden, Hydropress AB, invented Step Screen® in the early 1980’s Since then over 100 HUBER Step Screens have been installed in Australia and over 4000 units are operational worldwide. The STEP SCREEN® System is widely accepted and successful due to its function and easy-to-follow operation ...
Manufactured by:Huber Instrumente AG based inNunningen, SWITZERLAND
Accurate, aviation-proved, versatile... Meteo Station HM30. The HM30 is a compact, multifunktional measurement tool for climate data. Various meteo parameters, like Simultaneous display of pressure, humidity, temperature 1 and temperature 2 can be measured and displayed on the device in ...
Manufactured by:Hydroflux Pty Ltd based inSydney, AUSTRALIA
The HUBER RakeMax Raked Bar Screen is one of the range of high quality German manufactured screens designed specifically to process wastewater with high levels of solids and gross material. Over 100 different types of HUBER screens have been installed in Australia and recently ten HUBER RakeMax units have been supplied to the world’s largest sewage treatment plant in ...
Manufactured by:Huber Technology Middle East (FZE) based inSharjah, UNITED ARAB EMIRATES
Cost-effective separation and transport of screenings Pointing-the-way and innovative screening technology. Vertical steep installation angle of 70° / 75°, For high discharge heights and deep channels, For high flow rates, Lifting of screenings at bottom level possible. The STEP SCREEN® System is widely accepted and successful due to its function and easy-to-follow operation principle ...
Manufactured by:Huber SE based inBerching, GERMANY
The HUBER VRM® process is a system of ultrafiltration membranes submerged within the aeration tank. The resultant high effluent quality meets the most stringent regulations whilst also allowing for the capacity to meet the increasing and higher disposal legislation anticipated in the future, with optimised investment and operating ...
Manufactured by:Picatech Huber AG based inKriens, SWITZERLAND
A HUBER Fine Screen ROTAMAT® Ro1 is installed in a tank. The septic sludge is fed into the tank and, as it flows through the Fine Screen, all coarse material is retained. A screw conveyor with integrated screenings press removes the screenings from the tank, reduces their volume and weight and drops them into a container or bagging device. The entire treatment takes place in a fully enclosed ...
Manufactured by:Picatech Huber AG based inKriens, SWITZERLAND
Ultra fine Rotary Drum Screen with two-dimensional effect for very fine particulate material. Removal of hairs, fibres and fine suspended material. Service water and wash water treatment. Defined separation size. COD and BOD removal in river or sea outfall applications. Protection of membrane filtration ...
Manufactured by:Huber Instrumente AG based inNunningen, SWITZERLAND
Our modular built Pressure-Calibrator TM40 is unique in its conception. The device is built completely modular. 4 slide-in slots are freely ...
Manufactured by:Hydroflux Pty Ltd based inSydney, AUSTRALIA
The HUBER Q-PRESS® RoS3Q Inclined Sludge Press is a unique sludge dewatering machine developed by HUBER over 20 years ago and now over 1200 machines have been installed globally in many ...
Manufactured by:Huber Technology Middle East (FZE) based inSharjah, UNITED ARAB EMIRATES
Reliable, sturdy travelling screen: Very high screenings discharge capacity, Low headloss, Low installation height above ground level even in deep channels, Control-independent safety system, The RakeMax® Screen is perfectly suited to both municipal and industrial wastewater and process water screening. The cleaning elements, attached to the chain system, can easily be adjusted to suit ...