- Home
- Equipment
Refine by
Husmann Environmental Equipment & Supplies
4 equipment items found
Manufactured by:Maschinen- und Landmaschinenfabrik Husmann GmbH based inLathen, GERMANY
Especially designed for the comminution of general, bulky and mixed construction waste. The designation »HL II« is used for the Twin-Shaft Crusher. The Twin-Shaft Crusher of the type HL II 1722 has a crushing unit opening of 1.700 mm in width and 2.100 mm in length. All Crushers are offered on a welded steel profile construction with hook-lift system. Even static machines on steel ...
Manufactured by:Maschinen- und Landmaschinenfabrik Husmann GmbH based inLathen, GERMANY
The HFG VI with its 478 kW Scania engine is the most powerful machine of the HFG series. The infeed hopper with a length of 4.800 mm and a width of 2.400 mm is equipped with an infeed belt. The infeed material is mecanically conveyed via infeed belt to the rotor with freely swinging hammers. The infeed opening ha a height of 660 mm and a width of 1.700 mm. Thus, material of up to 350 mm can be ...
Manufactured by:Maschinen- und Landmaschinenfabrik Husmann GmbH based inLathen, GERMANY
The Husmann Fine Shredder HFZ is applicable for pre-crushed materials. The material is fed into the hopper by a short infeed belt and conveyed to the rotor. The infeed belt operates load-dependent as overload protection. The high-speed rotor with pendulum mounted hammers works over a breaker bar. The comminuted material can be discharged by conveyor belts or into a bunker. The machine can be ...
Manufactured by:Maschinen- und Landmaschinenfabrik Husmann GmbH based inLathen, GERMANY
The Shredder HFG V is a powerful, cost-saving machine and applicable in a variety of ways. The hopper with a length of 4.800 mm and a width of 1.900 mm is equipped with an infeed belt. The infeed material is mecanically conveyed via infeed belt to the rotor with freely swinging hammers. The infeed opening has a height of 540 mm and a width of 1.500 mm. Thus, material of up to 300 mm can be ...