- Home
- Equipment
Refine by
Itea Environmental Equipment & Supplies
7 equipment items found
Manufactured by:ITEA S.p.A. based inGallarate, ITALY
The Isotherm Pwr process is able to treat any material (liquid, solid or gas), which is feed into the reactor maintained under pressure; for gases and/or liquids (also with an high concentrations of suspended solids) , the introduction into the reactor does not present any particular problems (normal pumps are sufficient). Solids are introduced into the reactor in an aqueous suspension, the size ...
Manufactured by:ITEA S.p.A. based inGallarate, ITALY
Normally when speaking of the capacity of a certain plant one speaks in terms of quantity treated or worked, because each plant has its own specific product whose characteristics change within well defined limits. One of the most significant advantages of the Isotherm plant lies in its capacity to treat, contemporaneously or at different times, different materials, also materials very different, ...
Manufactured by:ITEA S.p.A. based inGallarate, ITALY
A great part of fuels contain non-combustible ashes, and for low ranking fuels and wastes this non-combustible fraction can become quite relevant; the traditional combustion of these fuels (in reality not all can be used in traditional processes) produces, in any case, slag that in small part accumulates at the bottom of the boiler (bottom ash) while almost all is carried away by the fumes (fly ...
Manufactured by:ITEA S.p.A. based inGallarate, ITALY
Coal is one of the most used fuels in the world for the production of electricity, both for its low cost and for its wide distribution in the world. The coal usually used by plants is only a small part of the coal in the world (the most expensive fraction), since there are large quantities of low ranking coal, at lower cost, which cannot be exploited for its characteristics (high content of ash, ...
Manufactured by:ITEA S.p.A. based inGallarate, ITALY
A great part of fuels contain non-combustible ashes, and for low ranking fuels and wastes this non-combustible fraction can become quite relevant; the traditional combustion of these fuels (in reality not all can be used in traditional processes) produces, in any case, slag that in small part accumulates at the bottom of the boiler (bottom ash) while almost all is carried away by the fumes (fly ...
Manufactured by:ITEA S.p.A. based inGallarate, ITALY
Oxygen: the Isotherm process foresees the use of technical oxygen and it’s not necessarily high purity cryogenic oxygen; the oxygen can come from various sources, depending on plant size and ...
Manufactured by:ITEA S.p.A. based inGallarate, ITALY
The fumes produced in “flameless” combustion are very pure, and consist essentially of CO2 and water vapour; however if the treated material contains halogens, (Clorine, etc.) or sulphur, the fumes are acidic because of the sulphur hydride or hydrochloric acid; in this case treatment is carried out in accordance with simple traditional techniques. Once the acidic components have been ...