- Home
- Equipment
Refine by
Indusvent Environmental Equipment & Supplies
13 equipment items found
Manufactured by:Indusvent based inRochdale, UNITED KINGDOM
Laser welded and longitudinally lock formed ducts are galvanised and made from 0.75 mm, 0.90 mm or 1.00 mm sheet metal (s). Ducts are also available in 1.25 mm sheet metal. Also available in other qualities and dimensions to order. Ducts of up to ø400 mm diameter are supplied as standard laser welded in lengths of 0.5 m, 1.0 m and 2.0 m. Other sizes from ø450 mm diameter are ...
Manufactured by:Indusvent based inRochdale, UNITED KINGDOM
Sliding dampers are made of 1.25 and 1.50 mm galvanised sheet metal with a damper of 2.00 mm galvanised sheet ...
Manufactured by:Indusvent based inRochdale, UNITED KINGDOM
Flanges are made in accordance with JKF’s standard, and are a standard component in the product range. Flanges are stock items in hot dip galvanised finish, but can be supplied either untreated or painted. Flanges in other dimensions or profiles are available to ...
Manufactured by:Indusvent based inRochdale, UNITED KINGDOM
The explosion isolation valve is used in order to prevent an explosion in the extraction filter being able to travel back through the ducting to the production premises or machines. The explosion isolation valve is mounted on the duct section between the extraction system and the source of the dust. The explosion isolation valve stops explosions that occur in the opposite direction of the normal ...
Manufactured by:Indusvent based inRochdale, UNITED KINGDOM
Indusvent’s HIGH EFFICIENCY CYCLONES are suitable for operation with both positive and negative pressure dust extraction systems. Our proven design ensures low differential pressure and a high separation efficiency for many varied material types. There are 10 standard models in the range starting with model JA20 which is suitable for air volumes up to 1,000 m3/h. The largest in our ...
Manufactured by:Indusvent based inRochdale, UNITED KINGDOM
Supplied with the same JKF assembly methods as duct systems. Jet caps from diameter ø700 - ø1000 mm are fitted with flanges as standard. Jet caps are fitted with an internal cone and drain hose for disposal of water. See next page for pressure loss ...
Manufactured by:Indusvent based inRochdale, UNITED KINGDOM
Telescopic ducts are made from 0.75 mm and 0.90 mm galvanised sheet metal and supplied with rapid lock pull rings, incl. rubber ...
Manufactured by:Indusvent based inRochdale, UNITED KINGDOM
Indusvent’s wide range of ductwork includes galvanised duct systems and welded duct systems in 1mm, 2mm and 3 mm material thickness. This covers a wide range of applications/industries for pneumatic transportation of dust particles. Indusvent’s duct systems have a circular cross section, with a wide range of components available i.e. bends, Straights, trouser, branch, transition and ...
Manufactured by:Indusvent based inRochdale, UNITED KINGDOM
The Indusvent galvanised ductwork system includes all components necessary for a complete and flexible extraction solution and can be used for particle transport, welding extraction ...
Manufactured by:Indusvent based inRochdale, UNITED KINGDOM
The 2mm and 3 mm Heavy Duty system includes all components necessary for a complete and flexible extraction solution and can be used for particle transport for abrasive ...
Manufactured by:Indusvent based inRochdale, UNITED KINGDOM
Access doors are made of 1.25 mm galvanised sheet metal, such that the inside is smooth and has a close ...
Manufactured by:Indusvent based inRochdale, UNITED KINGDOM
Indusvent’s FULLY WELDED diverter valves are suitable for operation in both pressurised duct systems and also for directing free-falling ...
Manufactured by:Indusvent based inRochdale, UNITED KINGDOM
Tapers are spot welded and made of 0.90 mm galvanised sheet metal. When assembling with wide pull rings [f.bb], rapid lock pull rings [f.lyn] and loose flanges [f.b.m.fl] length (L) is increased by 2 x 50 mm. State D- and d dimensions when ordering. Length L is stated in the table below. The difference between the larger and smaller diameter (D - d) is plotted on the vertical axis of the ...