- Home
- Equipment
Refine by
Intereco Environmental Equipment & Supplies
24 equipment items found
Manufactured by:Intereco S.a.s based inScalenghe (TO), ITALY
The unit is composed by: Inlet and settling chamber, properly inclined to convey solids to the screw channel Screw channel internally coated with antiwearing material Shaft less screw Water tank completed with discharge pipe Gear reducer drive unit Amperometric relay for overload protection (to be installed in the control panel) As standard, hot tip zinc coated carbon steel with AISI 304 S.S., ...
Manufactured by:Intereco S.a.s based inScalenghe (TO), ITALY
The screening of waste water is one of the preliminary mechanical treatment to which the waste water is subjected at the entrance of the treatment plants to remove and reduce suspended and floating materials. INTERECO produces chain vertical bar screens, rotating comb grid, arc and belt types, like request by the ...
Manufactured by:Intereco S.a.s based inScalenghe (TO), ITALY
Water coming from a frozen fish defrosting process is sent to a UF unit. Concentrate is all the organic part, while water and NaCl, permeate, are recycled. Besides volume reduction of waste, water recycling there is also the recovery of salt used in the process, which had to be added to tap ...
Manufactured by:Intereco S.a.s based inScalenghe (TO), ITALY
In this process, rinse waters from a stainless steel etching process (with small capacity), the same unit is used for the two different purpose. Beside separating pollutants reducing the volume of waste to be disposed, recycle permeate as side effect quality of final product has been improved, not having any more stains due to salts in tap water. After the production period, the same unit, with ...
Manufactured by:Intereco S.a.s based inScalenghe (TO), ITALY
Belt filtering table TF is used instead of a static thickener, with expensive concrete works, to thicken sludge before a digestor or a following dewatering unit (as belt press, plate filter press, centrifuge). Belt filtering tablet TF is complete with a vertical cylindrical reactor (with a variable speed mixer) to help sludge and polyelectrolite to react and separate from water. Flocculated ...
Manufactured by:Intereco S.a.s based inScalenghe (TO), ITALY
EDOM belt presses cover a small-medium range (500 to 1300 mm width), used in small municipalities and industries with their water treatment plants. Standard production is made with frames in hot dip zinc coated carbon steel, rollers and tank in AISI 304 SS. On request, EDOM may be made entirely in AISI 304 SS or AISI 316 SS. Belt presses can be supplied with self cleaning nozzles system, making ...
Manufactured by:Intereco S.a.s based inScalenghe (TO), ITALY
This unit for brackish well water has two pre treatment stages (sand filter and physical-chemical) and a RO pass, designed to produce 8 mc/h of potable water with a feed of 16 mc/h. It is completely automatic, with control on working parameters and chemicals dosing. Capacity: feed 16 mc/h, permeate 8 mc/h; brine 8 ...
Manufactured by:Intereco S.a.s based inScalenghe (TO), ITALY
This unit has been designed to produce potable water from surface water (lake, river) removing color, turbidity, bacteria and microorganism. The UF system has been installed inside a container together with a diesel power unit. To be used as natural disasters emergency unit. Sold to a Norwegian company but with Chinese Army as end ...
Manufactured by:Intereco S.a.s based inScalenghe (TO), ITALY
INTERECO is introducing a new technology Electrocoagulation to remove as sludge both heavy metals and most organic compounds. It is, at last, the industrial realization of the laboratory theory consisting of having a current pass through wastewater to make the suspended solids and most dissolved salts react as normal flocculated ...
Manufactured by:Intereco S.a.s based inScalenghe (TO), ITALY
The increasing request for sludges with a dryness percentage higher then 30%, can be satisfied, without very expensive incenerators, with Intereco’s granulation system. This very low running cost and no polluting system uses a double screw mixer “GRA”, in which the cake coming from the belt press is mixed with quick lime (CaO). Better then other devices, with the discontinuous ...
Manufactured by:Intereco S.a.s based inScalenghe (TO), ITALY
The unit has been designed to be installed over a rectangular concrete basin, to remove settled ...
Manufactured by:Intereco S.a.s based inScalenghe (TO), ITALY
Dynamic thickener ROTOSET with a sludge capacity up to 60 m3/hr. The unit is complete with vertical cylindrical reactor with impeller for a perfect sludge/polyelectrolite mixing, with a centrifugal filter cloth washing water pump, able to recycle the thickener filtrate, this to avoid water consumption and the increasing of the WWPT hydraulic head. ROTOSET is assembled on a hot dip zinc carbon ...
Manufactured by:Intereco S.a.s based inScalenghe (TO), ITALY
Manual and Automatic polyelectrolite preparation units, complete with one (EM), two (BSB) or three(BTB) tanks, connected with a siphon system, to realise an ageing on FIFO basis; the two tanks are used for powder dissolution (a 700 rpm propeller mixes water with polyelectrolite) and for solution storage. Up to 30 Kgs/hr in 8 different models; For powder and/or emulsion; With electrical ...
Manufactured by:Intereco S.a.s based inScalenghe (TO), ITALY
INTERECO produce sand classifiers to separate sand/grit from sewage; complete by an air-lift. The unit is installed in a concrete circular tank, completed by a diametral support bridge. It is composed by: Drive unit completed of gear mechanical speed variator. Thrust roller bearing to support shaft and mixer. Lower plastic ...
Manufactured by:Intereco S.a.s based inScalenghe (TO), ITALY
INTERECO produces penstocks to intercept of channels and a level regulators or flow rates. Several models, from those for the channel to those with seal 3 or 4 sides range, with the possibility to choose the manual or motorized ...
Manufactured by:Intereco S.a.s based inScalenghe (TO), ITALY
INTERECO produces this unit to be installed in a circular concrete basin, composed by: Diametral bridge with walking grate, hand rail, foot guard. Elicycloidal gear reducer/direct coupling drive unit. Transmission shaft, double arms, support beams. Bottom scraper. Vertical thickening beams. Soft inlet cylinder. Sludge feed pipe. Peripheral Thomson weirs. Overload protection with current relay. ...
Manufactured by:Intereco S.a.s based inScalenghe (TO), ITALY
After a twenty years long experience of units installed all over the World, INTERECO produce belt press to 3000 mm belts width. Apt for any type of sludge: Biological, chemical, paper milk dairy, inert and tanneries. To save money for the shipment, it is no necessary to use wood cages. For a belt press CAB 2000 is enough a 20” Flat Rack. Belt press EDOM and CAB 2500-3000 are divided in two ...
Manufactured by:Intereco S.a.s based inScalenghe (TO), ITALY
EDOM/L Belt presses with a pre-gravity zone and a sludge turnover, in size from 500 to 1200 mm belts width. This model is particularly apt for sludge with a low solids content (below 1.5% SS). Achieved capacity increases are up to 50% compared to the same standard belt press ...
Manufactured by:Intereco S.a.s based inScalenghe (TO), ITALY
To remove cake, INTERECO has different solutions: NT Belt conveyors and COC screw conveyors, both fixed or swivelling models as requested by the ...
Manufactured by:Intereco S.a.s based inScalenghe (TO), ITALY
This unit has been assembled on a trailer to be used in two public landfills. The process is one chemical-physical unit (it could be UF), followed by two stages RO, due to the high concentration of pollutants. Completely automatic with PLC, to discharge in surface ...