- Home
- Equipment
Refine by
Jash Environmental Equipment & Supplies
10 equipment items found
Manufactured by:Jash Engineering Limited based inIndore, INDIA
Short length / open top frame provided with short Length extension guides sufficient to engage at least half the overall vertical height of slide / door when the gate is full open. Slide sufficiently ribbed to suit the applicable water head and designed to suit rising stem requirement. Slide provided with integral pocket to house threaded stem connecting block connecting the slide with the ...
Manufactured by:Jash Engineering Limited based inIndore, INDIA
Roller gates are used for flood control, i rrigation, industrial water control, dams, water treatment plants, sewage treatment plants & power ...
Manufactured by:Jash Engineering Limited based inIndore, INDIA
Trash rack with vertical flat bars spaced apart is used to prevent large floating wastes from travelling further into intake structure, pumping station and treatment plants. Depending upon water height and handling capability either a single rack or multiple racks stacked over each other can be used for this application. Cleaning of trash rack has to be done manually after mechanically lifting ...
Manufactured by:Jash Engineering Limited based inIndore, INDIA
Jet Breaker washer compactor is ideal for washing, compacting and safely disposing of screenings / waste using a continuous bagging unit. It is installed after belt / screw conveyor such that the waste coming from the conveyor falls into the inlet portion of Jet Breaker. The waste is then transported via a shafted screw conveyor to washing zone where high pressure water jets are used to remove ...
Manufactured by:Jash Engineering Limited based inIndore, INDIA
Screw conveyor with wash compactor is ideal for non- hazardous transport, washing & compaction of waste / screenings removed by screens with a view to recover carbon content & reduce order from waste and reduce the volume to achieve lower transportation cost and area required for landfill. It is installed behind the screens such that the waste coming from the discharge chute falls into ...
Manufactured by:Jash Engineering Limited based inIndore, INDIA
These slide gates are directly mounted on the face of the wall and are used to isolate flow in and out of a conduit. They are suitable for 6 m seating and unseating head up to 600 x 600 mm size and 6 m seating and 3 m unseating head for higher sizes up to 1200x1200 ...
Manufactured by:Jash Engineering Limited based inIndore, INDIA
These open channel slide gates are used to isolate flowwithin as well as in and out of an open channel. These are suitable for seating water head and are provided with sealing arrangement on 3 sides only and not on top side and so the height of water should always be less than the height of ...
Manufactured by:Jash Engineering Limited based inIndore, INDIA
Bulkhead gates are a cost-effective way for dewatering channels. They are large fabricated gates used to close the waterway for maintenance of the downstream equipment in most cases. These gates are custom designed for specific applications in almost any size. Stacking gates also permits flow control for larger openings. The term bulkhead gate can be used to describe what is essentially very ...
Manufactured by:Jash Engineering Limited based inIndore, INDIA
Manual bar screen with vertical flat bars spaced apart is used to prevent large and medium floating wastes from travelling further into the screening chamber. These are generally installed at the upstream of Mechanical bar screen as well as a standby to the mechanical bar screen. Cleaning of screen has to be done manually with the help of manual rake comb provided with the screen. Manual screen ...
Manufactured by:Jash Engineering Limited based inIndore, INDIA
SERIES: C-201, ZFI – Resilient seated valve with metallic band – Cast Iron / Ductile Iron ...