- Home
- Equipment
Refine by
Kvt Environmental Equipment & Supplies
9 equipment items found
Manufactured by:Kanzler Verfahrenstechnik GmbH (KVT) based inGraz, AUSTRIA
The brine treatment process was originally developed by our engineering team to purify waste brine from epichlorohydrin and epoxy resin production, for reuse in the treatment of other processes such as C/A ...
Manufactured by:Kanzler Verfahrenstechnik GmbH (KVT) based inGraz, AUSTRIA
THERMODEC is a unique technology for the treatment of industrial sludge of varying consistencies and compositions. With KVT’s own revolutionary approach, paired with the latest thermal separation technology, you will recover materials and energy from your sludge, sustainably improve your CO2 footprint, and minimise your disposal costs regardless of its consistency and composition. The ...
Manufactured by:Kanzler Verfahrenstechnik GmbH (KVT) based inGraz, AUSTRIA
For the spent acid and sulfate regeneration the OXYSULF SAR is used. The spent acid with the fuel gas is fed into a special designed combustion chamber to form SO2. The acid together with fuel gas is fed into the burner through compressed air and ultrasonic atomizing. For special applications there is the possibility to use H2S gas or S feed instead of fuel gas to reduce energy cost. Depending on ...
Manufactured by:Kanzler Verfahrenstechnik GmbH (KVT) based inGraz, AUSTRIA
The DRY-FIL brand is the latest generation of advanced hot gas filtration systems for high temperature process gases with normal dust load. It achieves lower power consumption, without dilution air, cyclones, spark arrestment or other complex systems. After the filtration, the gas is ready for subsequent processes that require clean hot ...
Manufactured by:Kanzler Verfahrenstechnik GmbH (KVT) based inGraz, AUSTRIA
OXYSULF SCU is applied when SO2 and H2SO4 production is required. Liquid sulfur is fed into a specially designed combustion chamber to form SO2. The resulting process gas is fed into the scrubber to absorb the small quantity of potentially formed SO3. After the scrubber, part of the SO2 is cooled and condensed. The remaining SO2 is sent to the OXYSULF HK plant where the conversion of SO2 to SO3 ...
Manufactured by:Kanzler Verfahrenstechnik GmbH (KVT) based inGraz, AUSTRIA
The RTO is our solution to treat big quantities of waste gas with low concentration of VOC including a regenerative heat recovery ...
Manufactured by:Kanzler Verfahrenstechnik GmbH (KVT) based inGraz, AUSTRIA
The Wet Electrostatic Precipitator removes dust and/or aerosol in wet conditions. WESP separates particles and aerosols from the raw gas stream. This is done by charging the aerosol droplets in an electric field and by deposing them on the surface of the collector tubes. The discharged sulfuric acid droplets run downwards to the sump of the ...
Manufactured by:Kanzler Verfahrenstechnik GmbH (KVT) based inGraz, AUSTRIA
For a wide range of SO2 feed gases containing dust, OXYSULF MET is used. OXYSULF MET is applied in the metallurgical industry to treat roast gases containing dust (with dust concentration of up to 180g /Nm3). The roast gas leaving the furnace is cooled to 400 – 600 ...
Manufactured by:Kanzler Verfahrenstechnik GmbH (KVT) based inGraz, AUSTRIA
The saponification of DCH, its transformation into epichlorohydrin, is done by addition of sodium hydroxide (NaOH). The resulting mixture of epichlorohydrin and remaining DCH traces, as well as water and salt (NaCl), is separated by rectification. While epichlorohydrin in an aqueous solution is transferred to the next rectification step and separated from water, the remaining salt-water mixture ...