- Home
- Equipment
Refine by
Keller Environmental Equipment & Supplies
30 equipment items found
Manufactured by:Keller USA, Inc. based inFort Mill, SOUTH CAROLINA (USA)
When using coolants (MQL) are created fine aerosols which are separated with maximum effect by our AERO® oil mist separator. The new AERO® separator was designed and engineered to meet the strictest filtration requirements and enables reliable separation of emulstion coolant and oil mist. The AERO series have features that ...
Manufactured by:Keller USA, Inc. based inFort Mill, SOUTH CAROLINA (USA)
Our coolant mist collectors, ENA-series, filter water soluable aerosols created by coolants during cutting and metalworking. ...
Manufactured by:KELLER Pressure based inWinterthur, SWITZERLAND
The pressure transmitters of the 21C series with ratiometric 0,5...4,5V output combine chip-in-oil measuring cells with conventional electrical connections and pressure connections, making them ideal for industrial use. The transmitters are extremely resistant to environmental influences and deliver accurate measurement results over a temperature range of -40 °C to 125 ...
Manufactured by:KELLER Pressure based inWinterthur, SWITZERLAND
The pressure transmitters of the 21Y series have no internal seal and a high insulation voltage of 300 VDC, and are extremely resistant to environmental influences. The sophisticated compensation circuit makes it possible to specify a narrow total error band. A wide range of pressure connections and electrical connections are available to choose ...
Manufactured by:KELLER Pressure based inWinterthur, SWITZERLAND
The DCX-22AA data loggers compensate for changes in air pressure by means of a separate, water-tight absolute pressure sensor with a stainless steel separating diaphragm. Unlike gauge pressure systems with a capillary tube, this system is completely resistant to moisture and can therefore be immersed. Thanks to their long-life battery, they can keep measuring the water level, water pressure and ...
Manufactured by:KELLER Pressure based inWinterthur, SWITZERLAND
The DCX-22 level loggers achieve the highest measurement accuracy and are available in three different models – as Sealed Gauge, Vented Gauge or cable-free. Thanks to their long-life battery, they can keep measuring the water level, water pressure and temperature for years (up to 10 years at a rate of one measurement per hour). The data logger can be configured using the supplied software ...
Manufactured by:Keller USA, Inc. based inFort Mill, SOUTH CAROLINA (USA)
TR-1 for MQL and dust collection is part of the newly designed, energy-efficient, and flow-optimized separation solution to keep air clean during metal treatment. It was designed as a stand-alone-system to be installed adjacent to a machine (emission ...
Manufactured by:KELLER ITS based inIbbenbüren-Laggenbeck, GERMANY
With its wide variety of options and models, this pyrometer series offers unmatched versatility, whether you require a two-colour (ratio) or one-colour (spectral) measuring technique. Features include: through-the-lens sighting or laser target marker. Signal processing options include analogue output, digital interface, USB and RS ...
Manufactured by:KELLER ITS based inIbbenbüren-Laggenbeck, GERMANY
Pyrometers with through-the-lens sighting or laser target marker, analogue output and IO-Link interface acc. to IEC 61131-9. The right pyrometer for every ...
Manufactured by:KELLER ITS based inIbbenbüren-Laggenbeck, GERMANY
The radiation thermometers CellaTemp® PK Series detect the infrared radiation emitted by an object and convert it into a temperature. The detected temperature is displayed and transmitted to the analogue output for further processing. A unique combination of analogue and digital linearization features provides the CellaTemp® PK with a high-resolution signal processing unit. Therefore, ...
Manufactured by:Keller Lufttechnik GmbH Co. KG based inKirchheim unter Teck, GERMANY
For combustible, explosive, humid and adhesive dusts. The venturi wet scrubber models are used for the separation of substances that cannot normally be separated or are difficult to separate in dry operating systems. Our high-performance separators inject water into the airflow as the basic concept of the venturi principle. These multipurpose units can be utilized in almost all sectors of ...
Manufactured by:Keller Lufttechnik GmbH Co. KG based inKirchheim unter Teck, GERMANY
For highly effective, energy-efficient dry separation of fine dust. The VARIO eco series is particularly suitable for the separation of fine dust. Most classes of dust can be successfully separated. Significant separation efficiency is achieved with very low energy ...
Manufactured by:Keller Lufttechnik GmbH Co. KG based inKirchheim unter Teck, GERMANY
For highly effective, energy-efficient dry separation of fine dust in small spaces. The PT Filter series is especially suitable for the separation of fine, free-flowing dust created by mechanical and thermal processes. A special feature is the exchange of filter plates on the clean air side for easy maintenance, and reduced height for greater ...
Manufactured by:Keller USA, Inc. based inFort Mill, SOUTH CAROLINA (USA)
The eLine electrostatic separator efficiently separates adhesive aerosols such as those created during diecasting processes. Various applications can result in a diverse composition of exhaust air. For example, adhesive emissions are created during die casting processes or screw machine thread rolling, especially when adding lubricants or separating agents. Keller has developed the eLine which ...
Manufactured by:Keller Lufttechnik GmbH Co. KG based inKirchheim unter Teck, GERMANY
Explosive dust from dry processes or MQL is extracted directly at the machine and safely separated. TR-1 for MQL and dry processing was designed as a stand-alone-system to be installed adjacent to a machine (emission ...
Manufactured by:KELLER Pressure based inWinterthur, SWITZERLAND
In the high-precision level sensors of the 36XW series, the temperature dependence and nonlinearity are precisely compensated for in the microcontroller by means of a mathematical model. In addition to the RS485 interface, the measurement results can also be output via the integrated D/A converter as a rangeable analog signal. Extended lightning protection is also available as an ...
Manufactured by:KELLER Pressure based inWinterthur, SWITZERLAND
The remote data transmission unit ADT1-Tube is encased in a robust, stainless steel housing, which is ideally suited to installation in 2" monitoring pipes. The LoRa module, which can be configured on a country-specific basis, establishes a connection with the Internet and makes it possible to collect measurement data in a low-cost and energy-saving manner. These autonomous devices can be linked ...
Manufactured by:KELLER Pressure based inWinterthur, SWITZERLAND
The pressure transducers of the 10L series have a robust housing made of stainless steel, giving them optimum long-term stability for a range of OEM applications. The metal diaphragm is welded on front-flush and gap-free, separating off the piezoresistive pressure sensor, which is made of silicon, from the measuring medium. Every pressure transducer is measured over the entire pressure and ...
Manufactured by:KELLER Pressure based inWinterthur, SWITZERLAND
The level sensors of the 26Y series are budget-friendly, but still offer high accuracy and excellent long-term stability. They are available in versions for absolute or relative pressure. With a start-up time of just 5 ms, the Y line is ideally suited to data logger ...
Manufactured by:Keller USA, Inc. based inFort Mill, SOUTH CAROLINA (USA)
The VARIO eco series is designed for the high-efficiency filtration of fine dust particulates from many different applications, without consuming high-amounts of energy. The VARIO eco series allows for air re-circulation, which reduces plant heating / cooling costs. When the appropriate filters are installed, the VARIO series is suitable for a wide-range of applications. Most types of dust can be ...