- Home
- Equipment
Refine by
Kinney Environmental Equipment & Supplies
12 equipment items found
Manufactured by:S.P. Kinney Engineers, Inc. based inCarnegie, PENNSYLVANIA (USA)
S. P. Kinney is most noted for our heavy-duty Model A and Model AP Automatic Self-Cleaning Strainers. The Model AP is designed for operation where the pressure is less than 20 psi. Both models employ the use of a rotating cylindrical drum with a number of threaded holes containing one of many types of straining media. The drum is supported on a rotating shaft fitted with bearings and is contained ...
Manufactured by:S.P. Kinney Engineers, Inc. based inCarnegie, PENNSYLVANIA (USA)
S.P. Kinney can custom design filtration packages for any application. S.P. Kinney offers a wide range of custom manual and automatic designs to meet any dimensional, pressure, or temperature requirements that a customer may ...
Manufactured by:S.P. Kinney Engineers, Inc. based inCarnegie, PENNSYLVANIA (USA)
Body: Steel body with integral flanges and shaft bearing housings. Flanges are drilled per ASA Standards. Wafer or flangeless designs can also be furnished. Valve is not manufactured to AWWA specifications.Shaft: One-piece stainless steel shaft, extending completely through the valve disc. Disc: Steel disc is fastened to the valve shaft by body bound bolts, positively secured in position by ...
Manufactured by:S.P. Kinney Engineers, Inc. based inCarnegie, PENNSYLVANIA (USA)
Simplified design, ruggedly and dependably built, easy to operate and economical to maintain – are the principal advantages of the Kinney Swing Goggle Valve. The valve will render an absolute tight shut-off in blast furnace, basic oxygen, open hearth or other gas mains. It is designed for vertical operation in a horizontal main – with rollers and other daptations provided for ...
Manufactured by:Tuthill Corporation - Tuthill Vacuum & Blower Systems based inSpringfield, MISSOURI (USA)
Simple, robust design can handle process by-products – liquids, condensate, and even small particles. No oil or water in contact with process. No contact between operating components in the casing. Full pumping speed from atmospheric pressure down to 1 Torr; ultimate pressure 0.1 Torr (.05 Torr on Model KDP-800). Quiet operation – less than 85 dB(A). Short gas path through the pump ...
Manufactured by:S.P. Kinney Engineers, Inc. based inCarnegie, PENNSYLVANIA (USA)
Totally Water Cooledfor temperatures to 2000 degrees F, Tight sealing removable airfoil design seat, Water cooled body, disc and shaft- with unique water channels, Sizes: 20″-120″, Horizontal or vertical installation, Manual, electric, pneumatic or hydraulic operation, Positive internal stops, Ideal for use in electric furnaces- for scrap pre-heat or discharge ...
Manufactured by:Tuthill Corporation - Tuthill Vacuum & Blower Systems based inSpringfield, MISSOURI (USA)
Ideally suited for pumping wet mixtures. Can pull down as low as 4 Torr (5.3 mbar a). Low-pressure performance is limited by the vapor pressure of the sealing liquid: water, oil or process liquids. Complete engineered system solutions available: instrumentation, controls, piping & valves. Self-contained liquid recovery & recirculation are available. Center-anchored tie rods allow access ...
Manufactured by:S.P. Kinney Engineers, Inc. based inCarnegie, PENNSYLVANIA (USA)
The Model AFW-1 is S.P. Kinney’s light-duty Automatic Self-Cleaning Strainer. The Model AFW-1 is designed for operation where the pressure 20 psi and up. The strainer employs the use of a stationary wedge wire drum and a rotating cleaning ...
Manufactured by:S.P. Kinney Engineers, Inc. based inCarnegie, PENNSYLVANIA (USA)
Kinney is most noted for our heavy-duty Model A and Model AP Automatic Self-Cleaning Strainers . Both models are designed for continuous removal of suspended particles from all types of liquids. The Model A is designed for operation under positive pressure (20 psi or greater). Pipeline sizes range from 2' - 60' and larger. Both models employ the use of a rotating cylindrical drum with a number of ...
Manufactured by:S.P. Kinney Engineers, Inc. based inCarnegie, PENNSYLVANIA (USA)
The Model AM is S.P. Kinney’s light-duty Manual Strainer that is similar in design to the Model A. The Model AM is designed for operation where the pressure 20 psi and up. The strainer employs the use of a manually rotated cylindrical drum with a number of threaded holes containing one of many types of straining media. The drum positioned against a vertical backwash ...
Manufactured by:Oxford Filtration Ltd based inWindsor, UNITED KINGDOM
Oxford Filtration Ltd offer a comprehensive range of Y-type strainers from a simple cast iron threaded strainer to a large high pressure special alloy ...
Manufactured by:S.P. Kinney Engineers, Inc. based inCarnegie, PENNSYLVANIA (USA)
The Kinney-DDS hot blast valve is designed and service proven for continuous operation to stove dome temperatures. Stove change time is kept to a minimum as it takes only 10 seconds to open or close the valve. Compared to mushroom valve designs, less space is required, the pressure drop is negligible, costly piping and cable devices are eliminated; also the capital equipment cost is considerably ...