- Home
- Equipment
Refine by
Kisters Environmental Equipment & Supplies
72 equipment items found
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The type A four wheel bridge crane 4WBC is a collapsible unit intended for stream discharge measurement or for stream sediment sampling from a bridge. The 4WBC can deploy Columbus weights and sediment samplers up to 70 ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
DH59 is an easy-to-use medium-weight suspended sediment sampler. The sampler consists of an epoxy coated, streamlined bronze casting weighing approx. 10 kg, which partially encloses the sample container. It is equipped with a tail vane assembly to orient the intake nozzle into the approaching flow as the sampler enters the water. ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ bed load sampler BLSH is an easy-to-use hand-held sampler for measuring and analysing coarse sand, silt, gravel, rock or other insoluble materials carried by a stream on or immediately above its bed. The bed load samplers are designed for use in natural streams to determine rate of sediment concentration relative to ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
OPUS is the new generation of spectral sensors for online measurement of nitrogen and carbon compounds. Through the analysis of a full spectrum, OPUS is able to deliver reliable readings for NO3-N, NO2-N, organic ingredients (CODeq, BODeq, DOCeq, TOCeq), and a number of other parameters. OPUS features the new TriOS G2 interface, allowing fast and easy configuration of sensors by using a web ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The KISTERS Tipping Bucket Rain gauge Model TB305 is recognised as the world standard for measuring rainfall and precipitation in remote and unattended ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ Field Calibration Device FCD checks rain gauges in the ?eld for accuracy. The portable lightweight device effectively enables ?eld technicians to run functional tests and veri?cations of any rain gauge in the ?eld. The use of FCD saves time and money, because the tipping bucket rain gauges can remain ?xed in their location without the need for dismantling and transport and with ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The Flying Fox is a portable towing and positioning system with built-in electric motor and remote control. It moves remote-controlled over a span of rope transversely to the flow axis and pulls a measuring device – e.g. an ADCP boat – for cross-section measurement through the river, and positions the device exactly at the measuring ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The lightweight hand sampler DH48 is used for the collection of suspended sediment samples by wading rod suspension. The easy-to-use sampler consists of an epoxy coated, streamlined aluminium casting (weighing approx. 2 kg), which partially encloses the sample container. An intake nozzle extends horizontally from the nose of the sampler body. The axis of the sample container is inclined at an ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS have adopted the U.S.G.S. Columbus Pattern gauging weight which range from 7kg to 90 kg. These streamlined weights maintain a steadier position in water flowing at high velocities and align the current meter into the ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ PreciBal is an innovative high-quality precipitation gauge using the weighing principle for measuring liquid, solid and mixed precipitation within a wide temperature range. It conforms to the most stringent requirements of the WMO. PreciBal is a low power device even during cold winter times by using anti-freeze agent to decrease the freezing point of collected water. The optional ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ tipping bucket heater TB3H is a thermostatically controlled heating element, that raises the temperature of the interior of the rain gauge, funnel and catch to avoid the freezing of the gauge in cold climates with subsequent loss of precipitation ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
TB7 is a new generation high-quality tipping bucket rain gauge for measuring rainfall and precipitation in remote and unattended locations when used in conjunction with the Undercover data logger (see flip side) or a smart communication module. TB7 is a reliable ‘low cost’ device with a very good accuracy across a broad range of rainfall ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
Based on the proven constant bubble methodology of its predecessors (and significantly smaller in size and weight), the HS40 Compact water level sensing system is offered in the following ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
nanoFlu fluorometers are low-priced, submersible miniaturized fluorometers for highly precise and selective measurement of CDOM (colored dissolved organic matter, yellow substances), chlorophyll a or phycocyanin in cyanobacteria. Long-term stability of measurements is achieved by the combination of low power consumption and innovative coating of the optical window, as an energy efficient and ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The HS40 Series II Gas Purge Compressor and Bubbler System has been designed to replace conventional nitrogen gas bottle supply to bubble units or gas purge systems. The HS40 is used for measuring water level in dams, rivers, canals and tanks with up to 40 mH2O (130 ft) ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The oxygen sensor uses luminescence-based optical measurement technology and measures reliably and precisely. The low maintenance and small amount of consumable materials needed by the sensor provide immediate returns on investment. Only the membrane cap must be replaced every two years. The sensor can also be used in applications with a very weak water flow. The oxygen sensor is available with a ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
iLevel-GW is an IP data logger designed for very low power data acquisition of level and temperature in groundwater and surface waters. The system can be easily expanded into a multi-channel monitoring device by adding optional sensors for water quality monitoring. By default, an iLevel-GW comes with a coupled water level and water temperature sensor.The vented pressure sensors auto-compensate ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ dry bubble unit HS23 is a standard component of a ‘constant bubble’ type gas purge system. The HS23 provides a constant flow of gas (e.g. dry nitrogen or dried air) through a small diameter conduit (river line) to an opening submerged in the water body ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
HyQuant L+V is KISTERS’ state-of-the-art 60 GHz V-band FMCW* water level & Doppler water velocity radar, with top-tier radar electronics and radar-on-chip technology, offering advantages such ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ tipping bucket heater TB3H-LP is a low-power heating element, that raises the temperature of the interior of the rain gauge, funnel and catch to avoid the freezing of the gauge in cold climates with subsequent loss of precipitation records. The TB3H-LP saves energy by means of switching on power for a limited time only when snow is detected in the ...