- Home
- Equipment
Refine by
Klotz Environmental Equipment & Supplies
5 equipment items found
Manufactured by:Markus Klotz GmbH based inBad Liebenzell, GERMANY
The dilution system VS 100 is for the defined dilution of aerosols and thus provides the possibility to conduct particle measurements even in the case of very high particle concentrations. This is done by splitting the sample volume flow into 2 partial flows whereby 99% of the actual sample volume flow is directed through a HEPA filter that absorbs virtually all particles contained in the ...
Manufactured by:Klotz GmbH based inKötz, GERMANY
Fitting of ornamental and facing rings must be fully automatic since the systems developed so far have not optimally met the demands placed on our customers by the market. The call for greater flexibility and increased productivity required from us a new development concept. In addition to an inexpensive solution, the necessity for high availability and loading capacity were the main ...
Manufactured by:Markus Klotz GmbH based inBad Liebenzell, GERMANY
The particle counter box has been designed as 3-channel particle counter; it can be used to monitor up to 6 size classes on the display or 16 size classes with “Protrend”. A microcontroller (SPS) allows you to start measurements and read out three particle sizes with the help of a current signal for 4–20 mA (optional: voltage 0–10 V). In addition, a closed contact allows ...
Manufactured by:Klotz GmbH based inKötz, GERMANY
For the disposal from nuclear power stations, it is necessary to seal the nuclear waste with glass and cast it in moulds. The handling of those moulds occurs in a manless system. This is aggravated by the fact that the temperature in the bottles is approx. 600 C. For the handling of such moulds a gripper is to be ...
Manufactured by:Markus Klotz GmbH based inBad Liebenzell, GERMANY
The aerosol generator ATM 225 is used for generating test aerosols with defined properties. The number concentration of the aerosol particles can be set. From the determined concentration distributions of the produced DEHS aerosol it becomes evident that in the range of expected MPPS (Most Penetration Particle 0.2-0.3 μm) a very high particle concentration is provided (> 107 particles/cm3). ...