- Home
- Equipment
Refine by
Logis Tech Environmental Equipment & Supplies
9 equipment items found
Manufactured by:Logis-Tech, inc. based inManassas, VIRGINIA (USA)
The MDU–750PPC has an output of 750 SCFM and is designed for application on large body aircraft such as the C-130, KC-135 and C-17 on the flight line or in a hangar setting or storage area application. The MDU is fully air transportable and meets all current Military safety and usage requirements for flight line operations or for hangar use or around storage rooms. Equipped with a ...
Manufactured by:Logis-Tech, inc. based inManassas, VIRGINIA (USA)
The MDU–300PPC has an output of 300 SCFM and is designed for application for fighter aircraft on the flight line or in a hangar setting or storage room application. This MDU is applicable to multiple types of aircraft, such as F-15, F-16, F-22, and F-35, and mid-size helicopters with a simple change out of the AIA. Equipped with a pre-cooler and post-cooler the MDU provides consistent, ...
Manufactured by:Logis-Tech, inc. based inManassas, VIRGINIA (USA)
Our MDU Quad-150 Cart is designed specifically to give the customer the ability to dehumidify up to four (4) vehicles with a flexible parking plan or four (4) small storage containers or rooms. The Quad Cart is designed to dehumidify up to four ground vehicles, such as M-1 tanks, LAVs, etc. but also has the capability to dehumidify multiple military, private and commercial helicopters and small ...
Manufactured by:Logis-Tech, inc. based inManassas, VIRGINIA (USA)
Vehicle/Aircraft Interface Adapters (VIA/AIA) allow rapid connect/disconnect of dehumidifiers from the air craft, ground equipment or container it is designed to protect. Removal of coatings, bags and tarps can take significantly longer decreasing deployment speed and providing little protection to highly complex internal systems. Each adapter is manufactured for use on a specific piece of ground ...
Manufactured by:Logis-Tech, inc. based inManassas, VIRGINIA (USA)
The Dehumidified Container System (DCS) family of products are Controlled Humidity Protection (CHP) envelopes that provides for a secure relocatable corrosion inhibiting and mold and mildew reducing environment for all types of gear and equipment. The system was built with modularity and customization in mind. The size of the container, the type of dehumidifier based on operating environment and ...
Manufactured by:Logis-Tech, inc. based inManassas, VIRGINIA (USA)
The MDU-150E consists of a trailer-mounted 150 standard cubic per feet per minute (SCFM) air dehydration unit (ADU) that is fully air transportable and meets all current safety and usage requirements for flight line and hangar operations or for storage applications. This MDU is designed for use on UH-60 Black Hawk and AH-64 Apache helicopters and F-16 fighter aircraft positioned on the flight ...
Manufactured by:Logis-Tech, inc. based inManassas, VIRGINIA (USA)
The MDU-300E has an output of 300 scfm and is designed for application on helicopters or small aircraft on the flight line or in a hangar setting or storage area application. The trailer-mounted unit is fully air transportable and meets all current safety and usage requirements for flight line or hangar operations or storage area applications. This MDU is designed for use on many types of ...
Manufactured by:Logis-Tech, inc. based inManassas, VIRGINIA (USA)
Desiccant dehumidifiers thrive in cooler temperatures and excel when low relative humidity and dew points are required. These units can operate in sub-freezing environments. Units have a normal operating range of -40°F to 120°F. Desiccant dehumidification requires a desiccant media, airflow and heat to reactivate (purge moisture from the desiccant). A typical setup involves a desiccant ...
Manufactured by:Logis-Tech, inc. based inManassas, VIRGINIA (USA)
Refrigerant Dehumidifiers thrive in warm, humid conditions. A refrigerant dehumidifier is basically an optimized air conditioner. The goal is no longer to cool the air but use the process to remove moisture. Air is passed across a cold evaporator coil where the lower temperature causes condensation to occur. This water is either captured in a tank or plumbed away. The cold air is then passed ...