- Home
- Equipment
Refine by
Matec Environmental Equipment & Supplies
27 equipment items found
Manufactured by:Matec S.r.l. based inMassa (MS), ITALY
Matec Concrete Water Recycling plant solves the problem of surplus water derived from washing cement mixers, pumps, mixers and buckets.When combined with Disol 5000 (grease trap), the plant also solves the problem of water derived from washing wheels and tires of trucks exiting construction sites. CWR (Concrete Water Recycling) gives the opportunity of separating, by using a screw separator, or ...
Manufactured by:Matec S.r.l. based inMassa (MS), ITALY
In many sectors, such as the aggregates one, the need of a plant for the treatment of the wastewater that can be moved has always been felt, and for the two owners of Matec, Matteo Goich and Massimo Bertolucci, last summer was the right time to put the idea into practice.An ambitious project, but with the support of our team of engineers and of our customers that could be interested in the ...
Manufactured by:Terberg Matec UK Ltd. based inWarrington, UNITED KINGDOM
The OmniDEL represents our best selling low level fully automatic binlift solution, our subsidiaries and dealers worldwide deliver in excess of 800 into service each year and with good ...
Manufactured by:Terberg Matec UK Ltd. based inWarrington, UNITED KINGDOM
A superbly capable variant on the standard OmniDEL, the FW (Full Width) offers the widest bulk load aperture possible making the entire wifth of the tailgate open for large, hand loaded ...
Manufactured by:Terberg Matec UK Ltd. based inWarrington, UNITED KINGDOM
The OmniDEKA (E) is the electrically powered version of the OmniDEKA. With all the great features of its hydraulic brother but only requiring a 24v connection to the vehicle. Its low noise rating makes it one of the quietest bin lifts available. Just like the OmniDEKA, our low voltage, low noise electric OmniDEKA (E) is the product of some innovative thinking from ground up to deliver a high ...
Manufactured by:Matec Solutions Co.,Ltd. based inBeijing, CHINA
Applications: Ball Mill Discharge, Cyclone Feeding, Concentration Plant Processing, Tailing Pumping, Chemical Slurry, Quarry. Features: 1, Model Equivalence with Warman: MHM→AH; MHR→AH(R);MHH→HH;MM→M; MR→M(R); MLM→L; 2, Size Range: MHM: 1.5/1 - 20/18 ; MHR: 1.5/1 - 20/18 ; MHH: 1.5/1 - 8/6; MM: 10/8 - 12/10; MR: 10/8 - 12/10; MLM: 50 – 550, 3, Shaft Seal ...
Manufactured by:Matec Solutions Co.,Ltd. based inBeijing, CHINA
Applications: Dredging, Cyclone Feeding, Coal washing, Tailing reject, Quarry, Features: 1, Model Equivalence with Warman: MG→G; MGH→GH; 2, Size Range: MG: 6/4 - 18/16 ; MGH: 8/6 - 16/14 ; 3, Shaft Seal Options: Packing Seal, Expeller Seal, Hi-Seal; 4, Wet end parts materials equivalent: A05, A12 etc; 5, Dimentional interchangeability and guaranteed performance; 6, Optimized design ...
Manufactured by:Matec Solutions Co.,Ltd. based inBeijing, CHINA
Applications:Sump Pump, Cyclone Feeding, Concentration Plant Processing, Tailing Pumping, Cleaning, Quarry. Features: 1, Model Equivalence with Warman: MVM→SP; MVR→SP(R);2, Size Range: MVM: 40PV - 250TV ; MVR: 40PV - 150SV ; 3, Shaft Length Options: 900mm, 1200mm, 1500mm, 1800mm, 2100mm, 2400mm; Extended suction pipe is also available. 4, Wet end parts materials equivalent: A05, ...
Manufactured by:Terberg Matec UK Ltd. based inWarrington, UNITED KINGDOM
4 wheel container recognition, Auto Gather, Single Button Tip and Intelligent Speed Selection all comes as standard with the OmniTRADE commercial bin lift to provide you with a superbly engineered, fully featured and flexible bin lift system geared towards efficiency and ...
Manufactured by:Matec Solutions Co.,Ltd. based inBeijing, CHINA
Applications:Mining, Quarry, Cement, for crushing hard and medium hard ore and rock, such as iron ore, copper ore, limestone, sandstone. Features: 1, Dimension accuracy and Compatibility is guaranteed; 2, Customized dimension and material service is available; 3, Reliable performance is assured by good quality; 4, Superior wear resistance property optimized for longer service life. 5, Brand ...
Manufactured by:Matec Instrument Companies, Inc. based inNorthborough, MASSACHUSETTS (USA)
The LG100 is a standalone logarithmic amplifier with a conversion range in excess of 80 dB over a 10 MHz bandwidth. The LG100A is designed for use as a signal enhancement and compression amplifier and extends the dynamic range of RF signals generated by an ultrasonic instrument with a linear receiver. It has an integrated stepped attenuator for calibrating the dynamic range and an internal low ...
Manufactured by:Matec Instrument Companies, Inc. based inNorthborough, MASSACHUSETTS (USA)
The TRX 2 is a Pulser-Receiver with DAC (Distance Amplitude Correction) capabilities. The TRX 2 Is designed for high resolution, high sensitivity UT where indications or potential flaws may be very small or near to a front or back surface. It is applicable for both stream type (squirter) systems and immersion testing ...
Manufactured by:Terberg Matec UK Ltd. based inWarrington, UNITED KINGDOM
A perfect polymer bodied solution for low to mid volume organic waste collections. PBUV is part of a range of solutions developed for the tough demands of food and other organic waste collections, providing easily cleaned, robust solutions that will carry the materials safely in accordance with all relevant regulations. ...
Manufactured by:Matec S.r.l. based inMassa (MS), ITALY
The clarification process is essential to a wastewater treatment plant. Unlike the filtration carried out by the filter press, the clarification is a continuous process that separates water from the solid particles suspended into it. Matec can provide customers with any type of decanters, by designing and manufacturing vertical and horizontal ones made of stainless steel or ...
Manufactured by:Matec S.r.l. based inMassa (MS), ITALY
The Kompact plant is the plant which guarantees the quality of big plants to serve small-size companies. It is designed for users who have water flows which range from 200 to 700 l/min, and whose limited storage space demands very compact sludge. Everything is integrated into the plant framework, and the clear water tank and the silo decanter are ...
Manufactured by:Matec S.r.l. based inMassa (MS), ITALY
Bifloc is the Matec plant for the preparation of the flocculant, the polyelectrolyte which speed up the decanatation process of solids inside the decanter. The accessories of the metering plant make the setup process even more complete and automatic by reducing the consumption of the product and elimnating the need for an ...
Manufactured by:Terberg Matec UK Ltd. based inWarrington, UNITED KINGDOM
The Olympus EuroTRADE provides a class leading waste & recycling collection solution with the ability to safely handle a wide range of containers with its robust rear mounted lift ...
Manufactured by:Terberg Matec UK Ltd. based inWarrington, UNITED KINGDOM
Our best-selling, low level fully automatic triple split bin lift system. Developed to be the perfect partner to longitudinally split RCV compaction bodies, the OmniDEL Triple works harmoniously with 70/30 or 30/70 split ...
Manufactured by:Terberg Matec UK Ltd. based inWarrington, UNITED KINGDOM
50:50 low level automatic twin bin lift system. The OmniDEL 50:50 is a fully automatic 50:50 split bin lift that is designed to complement equal split RCV ...
Manufactured by:Terberg Matec UK Ltd. based inWarrington, UNITED KINGDOM
Introducing OmniDEKA, the result of intensive development from the ground up to provide a fresh take on how an automatic high-level binlift should be built. OmniDEKA comes packed with functionality, flexibility and features, all built upon a foundation of years of experience, generations of bin lifts and listening to customer feedback. ...