- Home
- Equipment
Refine by
Metraflex Environmental Equipment & Supplies
7 equipment items found
Manufactured by:Metraflex based inChicago, ILLINOIS (USA)
The Riser Clamp can be configured as either a riser clamp or anchor. It is easy to install and has a very small footprint. If one RAC is installed on the pipe at the floor penetration, it will function as riser clamp replacing the unreliable traditional riser clamp. If another set is installed on the other side of the floor the pipe will be locked in place, creating an anchor. ...
Manufactured by:Metraflex based inChicago, ILLINOIS (USA)
The HP2 is an externally pressurized expansion compensator that has several advantages over other in-line bellows joints. Since the pressure is on the outside of the bellows, more corrugations can be added to the design resulting in a joint capable of more movement. The design features pipe that acts as a liner and a casing that acts as a cover to protect the bellows from damage. An internal ...
Manufactured by:Metraflex based inChicago, ILLINOIS (USA)
Ductile iron ASTM A 395. Operates at 100°F @ 400PSI; 300°F at ...
Manufactured by:Metraflex based inChicago, ILLINOIS (USA)
Re-engineered, re-designed low pressure drop LPD Y-Strainer/Filter provides significant energy-savings The new Metraflex LPD Y-Strainer/Filter provides significant energy savings over the old Y-strainer. Metraflex has re-engineered the 100-year-old strainer and given it a leaner interior with fewer obstructions. The result is significantly lower pressure drops resulting in energy-savings so ...
Manufactured by:Metraflex based inChicago, ILLINOIS (USA)
The SST is an off the shelf model with corrugated stainless-steel hose and braid, carbon steel male pipe thread ends, and all welded construction. This is a flex connector that can be used anywhere additional flexibility is needed. Available in both import and domestic models. Custom versions are available, contact your local representative or Metraflex for details. Refer to table for ...
Manufactured by:Metraflex based inChicago, ILLINOIS (USA)
The Metraflex Style IV pipe guide provides lateral restraint of a piping system, allowing the pipe designer to control pipe movement and prevent bowing or buckling of the piping system. This style of pipe guide does not take the place of pipe supports, which are still required. For applications using thrust producing expansion joints we recommend that EJMA (Expansion Joint Manufacturers ...
Manufactured by:Metraflex based inChicago, ILLINOIS (USA)
The Metragator is an externally pressurized expansion joint that has several advantages over other bellows joints. Since the pressure is on the outside of the bellows, more corrugations can be added to the design resulting in a joint capable of more movement. The design also features pipe that acts as a liner and a casing that acts as a cover to protect the bellows from damage. The joint also ...