- Home
- Equipment
Refine by
Nst Environmental Equipment & Supplies
6 equipment items found
Manufactured by:Niles Steel Tank Company (NST) based inNiles, MICHIGAN (USA)
Niles Steel Tank offers a full line of air receivers. If you don’t see it listed, please refer to our Request for Quote page, give us the overall size, orientation, number of fittings and nozzles and working pressure, and we’ll work up a quotation. Typically we will issue an approval drawing where you can pin-point the location of the connections you require. All air receivers come ...
Manufactured by:Niles Steel Tank Company (NST) based inNiles, MICHIGAN (USA)
Ferritic-austenitic stainless steel also referred to as duplex stainless steels, combine many of the beneficial properties of ferritic and austenitic steels. Due to the high content of chromium and nitrogen, and often also molybdenum, these steels offer good resistance to localized and uniform corrosion. The duplex microSteel structure contributes to the high strength and high resistance to ...
Manufactured by:Niles Steel Tank Company (NST) based inNiles, MICHIGAN (USA)
Niles Steel Tank maintains a large selection of standard Large volume hot water storage tanks in inventory which are available for quick ship. Inventory gallon sizes range from 210 gallon up to 1000 gallons. All tanks are vertical, glass lined with oxide primer. Refer to our submittal pages for details on tank fitting configuration. Manways are required on all tanks OVER 36” diameter and ...
Manufactured by:Niles Steel Tank Company (NST) based inNiles, MICHIGAN (USA)
Niles Steel Tank Hot Water Generators are equipped with 2 or 4 pass, single or double wall construction, U-bend heat exchangers. It can be operated by passing either steam or hot water through the coil to heat the tank contents. Large heating capacity in small spaces makes this heater particularly suitable for boiler rooms with low head room. Hot Water Generators come in vertical and horizontal ...
Manufactured by:Niles Steel Tank Company (NST) based inNiles, MICHIGAN (USA)
Thermal Expansion tanks are used to help eliminate the expansion forces caused by heating and cooling of pressurized systems water. The tank air pressure must be field adjusted for proper system operation. It is important to properly charge the tank with enough pressure which equals the cold water supply pressure, prior to filling the system. Failure to properly pressurize the tank will cause ...
Manufactured by:Niles Steel Tank Company (NST) based inNiles, MICHIGAN (USA)
Designed for storage of potable water up to 180 degrees F (82 degrees C). All tanks are constructed and certified – in accordance with ASME IV, Part HLW for 125 PSI (862 kPa). Niles Steel Tank’s Ultonium™ lining is applied to the interior surface of the steel providing a tough wear resistant lining which minimizes the effects of high temperature hot water. Magnesium anode rods ...