- Home
- Equipment
Refine by
Omc Environmental Equipment & Supplies
29 equipment items found
Manufactured by:Orchard Machinery Corporation (OMC) based inYuba City, CALIFORNIA (USA)
If you are delivering your product in bulk, the most efficient way to collect it is into one of OMC’s Aftershock carts. The CC-525 is the big brother of the more compact CC-350. The Aftershock CC-525 is a conveyor cart featuring 525 cubic feet of capacity, a single chain delivery system with 30 inch conveyor width, and dual leveling augers. The CC-525 works especially well when teamed ...
Manufactured by:OMC S.p.A based inCernusco sul Naviglio, ITALY
VD10 Serie is a two ways, single seat valve type with body material in Ductil Iron GGG40.3 PN16, designed to satisfy most of the medium/low pressure conditions to control fluids as steam, water, oil and other different general industrial medium. VD10 valves are designed to control a broad variety of fluids, like steam, water, most of the medium and gases. One of the main features of this serie is ...
Manufactured by:Orchard Machinery Corporation (OMC) based inYuba City, CALIFORNIA (USA)
The Aftershock SD-36 Series II elevator works in tandem with a side-dump shuttle such as the OMC Aftershock AR-400, providing the operator with quick and efficient transfer of collected product from the shuttle and into the trailer. Two 36-inch-wide belts haul the product up to a height of 14 feet 6 inches, while an optional de-sticker and cross conveyor remove sticks and twigs from your product, ...
Manufactured by:O.M.C. Collareda S.r.l. based inSchio (VI), ITALY
Filtration process is a simple mechanical treatment applied to water for the suspended solid ...
Manufactured by:O.M.C. Collareda S.r.l. based inSchio (VI), ITALY
The positive or negative ions fixed on these radicals are replaced by ions of the same sign in the liquid solution in contact with ...
Manufactured by:O.M.C. Collareda S.r.l. based inSchio (VI), ITALY
High performance physical-chemical separation process for water clarification, sludge thickening and raw material ...
Manufactured by:O.M.C. Collareda S.r.l. based inSchio (VI), ITALY
Fine filtration, water clarification, raw material recovery depending on the ...
Manufactured by:OMC S.p.A based inCernusco sul Naviglio, ITALY
KA10 series is a top entry globe valve style body construction with a wide range of different single stage trims available. KD10 series combine the advanced modular design and the wide range of actuators to satisfy the needs of the industrial demand. Available in Carbon Steel (WCC), Stainless Steel (CF8M) and materials on request (Duplex, Monel, Hastelloy, etc...) KA10 valves are designed to ...
Manufactured by:OMC S.p.A based inCernusco sul Naviglio, ITALY
KA20 is a globe control valve designed to ensure perfect control of industrial fluid systems with operating pressures up to 105 bar. Designed according to ANSI standard, KA20 is available in carbon steel (WCC), Stainless Steel (CF8M) and special alloys materials on request (Duplex, Monel, Hastelloy, etc...) KA20 offers several configurations like: reduced bores, anti-noise and anti-cavitation ...
Manufactured by:OMC S.p.A based inCernusco sul Naviglio, ITALY
The OMC TM10 Series is a three-way style control valve for applications requiring mixing flow in a process control system. The open flow paths and simple construction provide a reliable and easy–to-maintain valve solution. TM10 series could be manufactured with pneumatic or electric actuators to meet all specific requirements of fluid control (water, steam, thermal oil, gas and other ...
Manufactured by:OMC S.p.A based inCernusco sul Naviglio, ITALY
MF40 is a flow initiated single seat two-way micro valve designed for the control of small flow rates. The high range ability value, the modular design and the flexibility of this series make it possible to satisfy the multiple control needs of industrial processes from the simplest to the heaviest.MF40 is particularly suitable for use on pilot and experimental plants. Actuator can be: Pneumatic ...
Manufactured by:Orchard Machinery Corporation (OMC) based inYuba City, CALIFORNIA (USA)
Similar to the SE-180, but without the swinging conveyor, the Aftershock FE-36 elevator works in tandem with a front-dump shuttle such as OMC’s Aftershock AR-450. The FE-36 controls are swingarm-mounted so that they are accessible to the driver of a shuttle, ensuring the driver’s safety, improving the unloading speed, and improving the efficiency of the operator in the ...
Manufactured by:OMC S.p.A based inCernusco sul Naviglio, ITALY
I/P converter for field mounting. It converts DC input signal in a pneumatic output (3÷15, 2÷18, 2÷20, 4÷30 psi). Available on request safety version (2014/34/UE "ATEX"): II 1 G Ex ia IIC T6, T5 ...
Manufactured by:OMC S.p.A based inCernusco sul Naviglio, ITALY
Single & double-acting positioners RP01 require an input signal of 3÷15 psi for proportional control actuator. The Positioner compares the output signal from a controller with the position feedback, and varies a pneumatic output signal to the actuator accordingly. The actuator position is therefore guaranteed for any controller output signal and the effects of varying differential ...
Manufactured by:OMC S.p.A based inCernusco sul Naviglio, ITALY
Single & double-acting positioners RE01 require an input signal of 4÷20 mA for proportional control actuator. The Positioner compares the output signal from a controller with the position feedback, and varies a pneumatic output signal to the actuator accordingly. The actuator position is therefore guaranteed for any controller output signal and the effects of varying differential ...
Manufactured by:OMC S.p.A based inCernusco sul Naviglio, ITALY
VL10 is the OMC entry level series with Body material in Ductil Iron GGG40.3 PN16 two ways single seat construction, soft tightness trim class VI ...
Manufactured by:OMC S.p.A based inCernusco sul Naviglio, ITALY
KD10 series is a top entry globe valve style body construction with a wide range of different single stage trims available. KD10 series combine the advanced modular design and the wide range of actuators to satisfy the needs of the industrial demand. Available in Carbon Steel (WCC), Stainless Steel (CF8M) and materials on request (Duplex, Monel, Hastelloy, etc...) KD10 valves are designed to ...
Manufactured by:Orchard Machinery Corporation (OMC) based inYuba City, CALIFORNIA (USA)
The AR450 Series III shuttle drives behind and unloads carts such as OMC’s Aftershock CC-350 or CC-525, exiting the row behind and front-dumps into an OMC Aftershock SE-180 swing elevator or FE-36 field elevator. Two hydraulic augers inside the bulk tank spread your product evenly for maximum carrying capacity of 450 cubic feet. Power comes courtesy of a Caterpillar Tier 4 4.4L 142HP turbo ...
Manufactured by:O.M.C. Collareda S.r.l. based inSchio (VI), ITALY
This process removes ionizable species from liquids using electrically active media and an electrical potential to effect ion ...
Manufactured by:OMC S.p.A based inCernusco sul Naviglio, ITALY
Single seat self-acting pressure reducers for steam, water, air and other types of non-hazardous fluids (Group 2 Directive 2014/68/EU.Equipped with balancing bellows and a large section driven plug, they allow an accurate regulation in any process condition. Adjustment of the calibration range is extremely simple as it can be carried out with a common spanner wrench without the aid of special ...