- Home
- Equipment
Refine by
Pch Environmental Equipment & Supplies
10 equipment items found
Manufactured by:PCH Engineering A/S based inCopenhagen, DENMARK
This PCH 1073 is the new generation of high quality low cost vibration monitors, which can be used for surveillance of vibration levels in machinery and detecting unbalance and bearing ...
Manufactured by:PCH Engineering A/S based inCopenhagen, DENMARK
The PCH 1072 Mk2 can be configured for a proximity probe for surveillance of dynamic vibrations as well as for GAP measurements. Both the dynamic vibration signal as well as the actual GAP measurements can be delivered through 2 individual DC outputs to a central controller. The monitor offers 4 relays freely configurable for vibrations and GAP alarms. For optimal adjustment of actual sensitivity ...
Manufactured by:PCH Engineering A/S based inCopenhagen, DENMARK
Do you need to monitor critical rotating machinery in ATEX zones? The PCH 1275 and 1277 Compact Vibration Guards are Ex certified and approved for mines and other hazardous areas. The compact PCH 1275 and PCH 1277 monitors with internal vibration sensors are ideal as part of the safety chain for dangerous machinery where high accuracy and fast response times are vital. PCH 1275 and PCH 1277 ...
Manufactured by:PCH Engineering A/S based inCopenhagen, DENMARK
The fully redundant SIL 2 / PL-d Cat 3 vibration monitor from PCH Engineering are suitable for enhanced protection according to EN 13849. Use them to permanently monitor critical and dangerous ...
Manufactured by:PCH Engineering A/S based inCopenhagen, DENMARK
PCH 1026 is a highly configurable, digital monitor with a built-in accelerometer. It is designed for low frequency, structural vibration monitoring applications in wind turbines. PCH 1026 provides far more precise electronic monitoring of the wind turbine than mechanical and electronic detectors. This reduces the turbine downtime and results in a more economical power ...
Manufactured by:PCH Engineering A/S based inCopenhagen, DENMARK
The PCH 1220 Electronic Vibration Switch provides basic, reliable protection of rotating machinery at a low cost. An electronic vibration switch has no moving parts that can become stuck. The electronic signal is also more accurate and has a higher degree of repeatability than a mechanical switch. In choosing an electronic vibration switch such as the PCH 1220, you are opting for the more ...
Manufactured by:PCH Engineering A/S based inCopenhagen, DENMARK
The PCH 1270 and PCH 1272 vibration transmitters with internal vibration sensors are ideal as part of the safety chain for dangerous machinery when high accuracy and fast response times are ...
Manufactured by:PCH Engineering A/S based inCopenhagen, DENMARK
The PCH 1072 is the new generation of high quality low cost vibration monitors, which can be used in many rotating machine applications. The standard Version is a 1 channels monitor with a frequency range from 0,5Hz to 1kHz. It offers user selectable filters and selection between acceleration, velocity or ...
Manufactured by:PCH Engineering A/S based inCopenhagen, DENMARK
PCH 1290 is a simple, cost-effective and safe machine monitoring solution offering full redundancy. The fully redundant vibration monitor comes with two individual sensors in one casing. This means that you only need to mount one device to get the data input of two vibration sensors. PCH 1290 is suitable for enhanced SIL 2 protection in compliance with EN 13849, as each of the two individual ...
Manufactured by:PCH Engineering A/S based inCopenhagen, DENMARK
The 4-channel PCH 1420 is an advanced vibration monitor which provides a wide range of real-time vibration data, remote data access and local alarms. You can use the PCH 1420 vibration monitor as a stand-alone solution or connect it to your SCADA or PLC ...