- Home
- Equipment
Refine by
Poelsan Environmental Equipment & Supplies
7 equipment items found
Manufactured by:Poelsan Plastic San.Tic A.S. based inTekkeköy, TURKEY
Poelsan compression fittings should be kept away from hard or sharp objects during storage or installation phases. If the installation will be under the ground, it should be covered with sand in order to keep away from contact with hard and sharp objects. Damaged fittings shouldn’t be used ...
Manufactured by:Poelsan Plastic San.Tic A.S. based inTekkeköy, TURKEY
Poelsan compression fittings should be kept away from hard or sharp objects during storage or installation phases. If the installation will be under the ground, it should be covered with sand in order to keep away from contact with hard and sharp objects. Damaged fittings shouldn’t be used ...
Manufactured by:Poelsan Plastic San.Tic A.S. based inTekkeköy, TURKEY
Used in Ø16 mm, Ø20 mm, Ø25 mm, Ø32 mm Low Density Polyethylene (LDPE) Pipes (Flat Drip Irrigation Pipe). Also might be used with Round Drip Irrigation Pipe with Ø16 mm diameter up to 0.8 mm of wall thickness and Ø20 mm diameter with 1.0 mm of wall thickness. Also might be used as Fittings for Ø16 mm, Ø20 mm, Ø25 mm, Ø32 mm ...
Manufactured by:Poelsan Plastic San.Tic A.S. based inTekkeköy, TURKEY
For a proper offtake with the Grommet Gasket, the pipe should be punched 20 mm according to the Mini Valve with Grommet Gasket to be ...
Manufactured by:Poelsan Plastic San.Tic A.S. based inTekkeköy, TURKEY
The filter should be used in the system. When the filter is not used, the parts inside the valve may be damaged, and the working life will be shortened. Valves consist of parts that can be disassembled, and assembled. The dismantled parts must be assembled correctly. Sealing elements such as Teflon etc. should be used in the assembly of the threaded parts. Ball valves are not suitable for fluids ...
Manufactured by:Poelsan Plastic San.Tic A.S. based inTekkeköy, TURKEY
Used in Ø16 mm, Ø20 mm, Ø25 mm, Ø32 mm Low Density Polyethylene (LDPE) Pipes (Flat Drip Irrigation Pipe). Also might be used with Round Drip Irrigation Pipe with Ø16 mm diameter up to 0.8 mm of wall thickness and Ø20 mm diameter with 1.0 mm of wall thickness. Also might be used as Fittings for Ø16 mm, Ø20 mm, Ø25 mm, Ø32 mm ...
Manufactured by:Poelsan Plastic San.Tic A.S. based inTekkeköy, TURKEY
Clamp saddles should be kept away from hard and sharp objects during the storage and installation. If the installation is laid under the ground, it should be covered with sand to protect it from hard and sharp objects. Any damaged adaptor should not be used ...