- Home
- Equipment
Refine by
Proflex Environmental Equipment & Supplies
34 equipment items found
Premium
Manufactured by:Proco Products, Inc. based inStockton, CALIFORNIA (USA)
The Proco ProFlex™ Style 730 rubber duckbill check valves are designed to easily slip over an existing pipe and be attached with heavy-duty stainless steel clamps. It can be installed in both vertical and horizontal ...
Premium
Manufactured by:Proco Products, Inc. based inStockton, CALIFORNIA (USA)
The Proco Style 731 ProFlex™ check valves are engineered for installation on pre-existing pipe lines such as manholes, outfalls and vaults where the outfall invert of the pipe is close to the floor of the manhole or outfall. When a new installation is being designed, the 731 valves can be engineered into the pipe layout with little concern for outfall clearance due to its “low ...
Premium
Manufactured by:Proco Products, Inc. based inStockton, CALIFORNIA (USA)
The Proco ProFlex Style 770 and 780 wafer style rubber check valves feature many design benefits, including: All-rubber construction to resist abrasive slurries. NSF 61 standard construction. Ultra-quiet operation, with no water hammer. Unique design to prevent backflow. Negligible maintenance and energy costs. Will not warm or freeze. Quick interchange with any flap type check valve. Available ...
Premium
Manufactured by:Proco Products, Inc. based inStockton, CALIFORNIA (USA)
The Proco ProFlex 720 in-line flanged rubber duckbill check valve is designed to fit directly inside of an existing pipe. This particular valve is supplied with a flat face rubber flange, which allows installation between existing pipe flanges, and eliminates the need for a valve body. Various drilling standards are available upon ...
Premium
Manufactured by:Proco Products, Inc. based inStockton, CALIFORNIA (USA)
The ProFlex Style 790 Low Headloss In-Line Rubber Check Valve design allows for a passive flow and allows the valve to be installed without having to do any modifications to existing structures or costly pre-install planning. The unique fold away design of the inner sleeve also allows for a near full port flow, allowing for quick drainage. The ProFlex Style 790 Low Headloss In-line Rubber Check ...
Premium
Manufactured by:Proco Products, Inc. based inStockton, CALIFORNIA (USA)
The Proco Style 711 ProFlex™ check valves are engineered for installation on pre-existing pipe lines such as manholes, outfalls and vaults where the outfall invert of the pipe is close to the floor of the manhole or outfall. When a new installation is being designed, the 711 valves can be engineered into the pipe layout with little concern for outfall clearance due to its “low ...
Premium
Manufactured by:Proco Products, Inc. based inStockton, CALIFORNIA (USA)
The ProFlex™ 710TT has been engineered and developed to be the most efficient and specifiable valve to ensure 100% mixing capability in potable water and sewage reservoir/storage tanks. Under U.S. Patent No. 11,396,951, the new patented torsional flow design of the valve provides a unique spinning motion which has never been offered before and is a stand-alone feature. Its operational ...
Premium
Manufactured by:Proco Products, Inc. based inStockton, CALIFORNIA (USA)
The ProFlex™ Style 730M is the most recent addition to the ProFlex™ line of rubber check valves. The Style 730M is a molded rubber light weight check valve. This type of check valve is available ranging in sizes from 3/4” to 6” pipe diameter and can be directly mounted to the OD of schedule 40 pipe. The complete size range is supplied with a ¾” -300 Stainless ...
Premium
Manufactured by:Proco Products, Inc. based inStockton, CALIFORNIA (USA)
What Does a Coarse Bubble Diffuser Do? Coarse bubble diffusers aerate or mix wastewater for effluent / sewage treatment and pollution control. A coarse bubble diffuser produces bubbles which rise from the floor of a wastewater treatment plant or sewage treatment tank. They are used in grit chambers, equalization basins, primary and secondary settling ponds, and areas where sediment settling is a ...
Premium
Manufactured by:Proco Products, Inc. based inStockton, CALIFORNIA (USA)
TheProco ProFlex Style 710 flanged duckbill check valve is designed to bolt directly to both existing flanges, as well as new installations. The flanges are drilled 150# standard, however other drilling standards are available upon request. The ProFlex Style 710 can be installed in either a vertical or horizontal ...
Premium
Manufactured by:Proco Products, Inc. based inStockton, CALIFORNIA (USA)
Proco Style 234L rubber expansion joints are built to withstand even the most rigorous piping system configurations. They are low-profile, quadruple-wide arch products that are precisely designed to absorb directional movements of rigid pipe systems, as well as reduce noise and vibration, and compensate for misalignment due to long-term ...
Premium
Manufactured by:Proco Products, Inc. based inStockton, CALIFORNIA (USA)
The Proco ProFlex Style 740 slip-on in-line rubber duckbill check valves are designed to slip directly into an existing pipe, and are supplied with an expandable clamp to secure it in ...
Premium
Manufactured by:Proco Products, Inc. based inStockton, CALIFORNIA (USA)
The Proco ProFlex Style 750 jacketed flanged rubber check valves are designed with a full metal enclosure, for easy installation within existing piping ...
Manufactured by:Ergodyne based inSt. Paul, MINNESOTA (USA)
Standard Spandex Back Support: Sticky Finger® Stays, innovative Power Panel™ positioners and ...
Manufactured by:Ergodyne based inSt. Paul, MINNESOTA (USA)
The ProFlex® 7941 Hi-Vis Cut-Resistant Protective Arm Sleeve offers level 4 cut protection with a breathable, moisture-wicking material. This A4 cut-resistant Sleeve is an innovative, first-of-its-kind sleeve that provides protection from cuts and slashes while incorporating moisture-wicking fibers to keep workers ...
Manufactured by:Tecpro Energy Systems based inChennai, INDIA
PROFLEX TP636E Tube diffuser is an assembly of high quality EPDM membrane of 63mm diameter and 610mm length on standard PVC pipe and tightly held by SS 304 clamps to ensure trouble free operation. The air inlet is through rigid PVC Hub designed to provide uniform air distribution throughout the tube. The minute pores on the membrane behave as NRV to prevent water from entering the tube.TP636 E ...
Manufactured by:Tecpro Energy Systems based inChennai, INDIA
PROFLEX TP631E Tube diffuser is an assembly of high quality EPDM membrane of 63mm diameter and 1000mm length on standard PVC pipe and tightly held by SS 304 clamps to ensure trouble free operation. The air inlet is through rigid PVC Hub designed to provide uniform air distribution throughout the tube. The minute pores on the membrane behave as NRV to prevent water from entering the tube.TP631E ...
Manufactured by:Tecpro Energy Systems based inChennai, INDIA
PROFLEX TP636 S Tube diffuser is an assembly of high quality SILICON membrane of 63mm diameter and 610mm length on standard PVC pipe and tightly held by SS 304 clamps to ensure trouble free operation. The air inlet is through rigid PVC Hub designed to provide uniform air distribution throughout the tube. The minute pores on the membrane behave as NRV to prevent water from entering the tube.TP636 ...
Manufactured by:Ergodyne based inSt. Paul, MINNESOTA (USA)
The ProFlex 922CR Nitrile-Coated ANSI Level A3 Cut-Resistant Gloves feature patented dorsal impact reducing (DIR) protection on top of a cut-resistant HPPE seamless knit glove. These knit work gloves also have a super-durable sandy foam nitrile ...
Distributed by:IMEX-Solutions based inBlijham, NETHERLANDS
Standard Dorsal Impact-Reducing Gloves: Maximum impact protection and full coverage; durability and grip in the toughest ...