- Home
- Equipment
Refine by
Propex Environmental Equipment & Supplies
7 equipment items found
Manufactured by:Uponor Ltd. based inMississauga, ONTARIO (CANADA)
ProPEX LF brass iron pipe size (IPS) groove fitting adapters provide a direct connection to groove connections designed to meet CSA B242-05. These fittings are IPS on the groove connection side. Note: ProPEX tool is required. ProPEX rings sold ...
Manufactured by:Uponor Ltd. based inMississauga, ONTARIO (CANADA)
Uponor's 1" Copper Manifold is 6 feet in length and features 24 individual 1⁄2" ProPEX lead-free brass outlets spaced three inches on center.1 The manifold is suitable for cutting to any length necessary to achieve the desired number of outlets. ProPEX Tool is required. ProPEX Rings are sold ...
Manufactured by:Uponor Ltd. based inMississauga, ONTARIO (CANADA)
ProPEX EP opposing-port tees feature 1" through 2" ProPEX flow-through connections with opposing 3⁄4" ProPEX branch outlets. The tees are made of engineered polymer, which is proven in demanding hot-water applications. Note: ProPEX tool is required. ProPEX rings sold ...
Manufactured by:Uponor Ltd. based inMississauga, ONTARIO (CANADA)
ProPEX EP and LF brass swivel faucet adapters connect 1/2" Uponor AquaPEX tubing to male NPSM faucet connections. Note: ProPEX tool is required. ProPEX rings sold ...
Manufactured by:Uponor Ltd. based inMississauga, ONTARIO (CANADA)
ProPEX 1" copper branch manifolds feature 1/2" ProPEX LF brass outlets brazed to the manifold trunk. Sweat manifolds together to create the desired number of outlets. Do not exceed acceptable flow rates for 1" nominal copper. Note: ProPEX tool is required. ProPEX rings sold ...
Manufactured by:Uponor Ltd. based inMississauga, ONTARIO (CANADA)
ProPEX engineered polymer (EP) reducing tees make diverting connections for Uponor crosslinked polyethylene (PEX-a) pipe for use in hot and cold domestic potable water systems, residential fire sprinkler systems and hydronic radiant heating and cooling systems. Each end of the tee is manufactured with an Uponor ProPEX fitting for connections to Uponor AquaPEX or Wirsbo hePEX pipe.1 Note: Branch ...
Manufactured by:Uponor Ltd. based inMississauga, ONTARIO (CANADA)
ProPEX brass ball valves are a cost-effective alternative for radiant heating/cooling and hydronic piping applications. Both ends are manufactured with the ProPEX fitting for connections to Uponor PEX pipe. The full-port valves are compatible with propylene glycol mixtures up to 50%. Stem extensions can be installed to accommodate up to 2" of pipe insulation. Note: ProPEX brass ball valves are ...