- Home
- Equipment
Refine by
Q Lab Environmental Equipment & Supplies
16 equipment items found
Manufactured by:Q-Lab Corporation based inWestlake, OHIO (USA)
Q-Lab offers an advanced water repurification system as an option for QUV and Q-SUN test chamber models with water spray. The system can save over 1,000 liters of expensive, purified water per day in a test cycle that calls for several hours of water spray, and can pay for itself in a matter of months. Unlike competing systems that simply recirculate dirty water, Q-Lab's repurification system ...
Manufactured by:Q-Lab Corporation based inWestlake, OHIO (USA)
QUV space saver frames from Q-Lab help preserve space in crowded labs with multiple QUV test chambers. By allowing QUV testers to be stacked two-high, the frames efficiently make use of the same floor space in the lab. The QUV tester is designed with doors that swing up and out of the way for easy access to the chamber. QUV space saver frames maintain the benefits of this feature by allowing ...
Manufactured by:Q-Lab Corporation based inWestlake, OHIO (USA)
The Universal Calibrator (UC) system is used for calibration of temperature in Q-SUN xenon arc testers and irradiance in QUV accelerated weathering and Q-SUN testers. This system consists of irradiance and temperature "smart sensors" that can be used to calibrate all new Q-Lab testers. All smart sensors are affordably replaced or recalibrated yearly. A handheld display unit is available that can ...
Manufactured by:Q-Lab Corporation based inWestlake, OHIO (USA)
For over 60 years, Q-PANEL test substrates have been recognized as the world standard for a consistent and uniform test surface for paints, plating, adhesives, sealants, rust inhibitors, and other coatings. This consistency and uniformity is now available through Q-Lab’s CX-series corrosion test coupons. Q-PANEL corrosion test coupons ensure repeatability and reproducibility when performing ...
Manufactured by:Q-Lab Corporation based inWestlake, OHIO (USA)
Q-PANEL Aluminum test substrates from Q-Lab minimize metal variability as a source of bias in critical tests. Made from widely-available aluminum alloys, they are clean, consistent, convenient and economical. A wide range of panel sizes and types are available for immediate shipment from stock. Panels are stored completely clean and, in most cases, can be used right out of the ...
Manufactured by:Q-Lab Corporation based inWestlake, OHIO (USA)
Q-PANEL® steel test substrates from Q-Lab minimize metal variability as a source of bias in critical tests. Made from standard low-carbon, cold-rolled steel, they are clean, consistent, convenient, and economical. A wide range of panel sizes and types are available for immediate shipment from stock. Panels are stored completely clean and, in most cases, can be used right out of the ...
Manufactured by:Q-Lab Corporation based inWestlake, OHIO (USA)
Q-Lab offers a wide variety of steel and aluminum Q-PANEL standard substrates to serve as many customer testing needs as possible. The Q-PANEL Selector is a great way to learn about our complete offerings. In addition to these standard panels, we can also make other types and sizes to meet special testing needs. These include custom panels as small as 2.54 cm (1 in) circles, to as ...
Manufactured by:Q-Lab Corporation based inWestlake, OHIO (USA)
The Q-SUN Xe-2 is a mid-sized xenon arc test chamber. This model is a popular choice for weathering and lightfastness testing of textiles, paints and coatings, and other thin specimens. The Q-SUN Xe-2 rotating rack xenon arc test chamber reproduces the damage caused by full-spectrum sunlight, heat, and rain. In a few days or weeks, it can reproduce the damage that occurs over months or years ...
Manufactured by:Q-Lab Corporation based inWestlake, OHIO (USA)
Cyclic corrosion testing provides the best possible laboratory simulation of natural atmospheric corrosion. Research indicates that test results are similar to those obtained outdoors in resulting structure, morphology, and relative corrosion rates. Q-FOG CRH cyclic corrosion chambers can perform traditional salt spray, Prohesion, and nearly all cyclic automotive tests. They feature ...
Manufactured by:Q-Lab Corporation based inWestlake, OHIO (USA)
The QCT condensation tester – “The Original Cleveland Cabinet™” - was first introduced in 1956. The QCT simulates the damaging effects of outdoor moisture attack by condensing warm water directly onto test specimens. In a few days or weeks, the QCT tester can reproduce the damage due to moisture that occurs over months or years outdoors. The QCT tester is fast, easy to ...
Manufactured by:Q-Lab Corporation based inWestlake, OHIO (USA)
The QUV accelerated weathering tester reproduces the damage caused by natural sunlight, rain, and dew. In a few days or weeks, the QUV tester can reproduce the damage that occurs over months or years outdoors. To simulate outdoor weathering, the QUV accelerated weathering tester exposes materials to alternating cycles of ultraviolet (UV) light and moisture at controlled, elevated temperatures. It ...
Manufactured by:Q-Lab Corporation based inWestlake, OHIO (USA)
The Q-SUN Xe-3 is a versatile, full-featured weathering tester. It uses three xenon lamps for high specimen capacity and test uniformity, and can be used to test flat or 3D specimens. The Q-SUN Xe-3 xenon arc test chamber reproduces the damage caused by full-spectrum sunlight, heat, and rain. In a few days or weeks, it can reproduce the damage that occurs over months or years outdoors. The Q-SUN ...
Manufactured by:Q-Lab Corporation based inWestlake, OHIO (USA)
Q-RACK outdoor exposure racks are the same aluminum racks that are used at Q-Lab Florida and Q-Lab Arizona to perform natural outdoor exposure tests. Now you can buy these professional-quality racks to perform exposures at your own site. Q-RACK kits, accessories, and non-standard mounting systems are available for different applications and testing requirements. They meet ISO, ASTM, SAE, and ...
Manufactured by:Q-Lab Corporation based inWestlake, OHIO (USA)
The Q-SUN Xe-8 is the NEW standard in large capacity, rotating rack xenon arc weathering testers. The Q-SUN Xe-8 tester offers greater capacity, lower price, and significantly longer lamp life than leading competitors, in addition to its unmatched technical capabilities. The versatile Q-SUN Xe-8 tester is the simplest, most reliable, and easiest-to-use large-capacity rotating rack xenon arc ...
Manufactured by:Q-Lab Corporation based inWestlake, OHIO (USA)
The Q-SUN Xe-1 is an economical, single-lamp xenon arc weathering tester. Its small scale is perfect for labs with a limited budget or those conducting exploratory R&D testing. The Q-SUN Xe-1 xenon arc chamber reproduces the damage caused by full-spectrum sunlight, heat, and rain. In a few days or weeks, it can reproduce the damage that occurs over months or years outdoors. The Q-SUN Xe-1 ...
Manufactured by:Q-Lab Corporation based inWestlake, OHIO (USA)
Cyclic corrosion testing provides the best possible laboratory simulation of natural atmospheric corrosion. Research indicates that test results are similar to those obtained outdoors in resulting structure, morphology, and relative corrosion rates. Q-FOG SSP model testers from Q-Lab can run traditional salt spray and Prohesion tests. Q-FOG CCT testers can also perform wet/dry cycling with ...