- Home
- Equipment
Refine by
Rimeco Environmental Equipment & Supplies
14 equipment items found
Manufactured by:Rimeco AS based inAabenraa, DENMARK
No thickness requirementMAXIMUM size for the steelmill 1,5 x 0,5 x 0,5 m. Steriles are not accepted. Thin new production steel scrap predominantly less than 3mm thick prepared in a manner to ensure direct charging. The steel scrap must be uncoated unless permitted by joint agreement and be free of unboundribbons to avoid trouble when charging. Must be free of metallic copper, tin, lead (and ...
Manufactured by:Rimeco AS based inAabenraa, DENMARK
MAXIMUM thickness 3 mm MAXIMUM size 1,5x0,5x0,5m Steriles are not accepted. Thin new production steel scrap predominantly less than 3 mm thick prepared in a manner to ensure direct charging. The steel scrap must be uncoated unless permitted by joint agreement and be free of unbound ribbons to avoid trouble when charging. Must be free of metallic copper, tin, lead (and alloys), mechanical pieces ...
Manufactured by:Rimeco AS based inAabenraa, DENMARK
MINIMUM thickness 6 mm MAXIMUM size 0,4xO,4xO,4m. Thick new production steel scrap predominantly more than 6mm thick prepared in a manner to ensure direct charging. The steel scrap must be uncoated unless permitted by joint agreement and be free of rebars and merchant bars even from new production. Must be free of metallic copper, tin. lead (and alloys), mechanical pieces and steriles to meet the ...
Manufactured by:Rimeco AS based inAabenraa, DENMARK
MAXIMUM thickness 3 mm. No special requirements for lengths should be able to be squeezed in packages. MAXIMUM size 0,4x0,4x0,4 m (sales). Steriles are not accepted. New production thin steel scrap (less than 3mm thick) compressed or firmly baled in a manner to ensure direct charging. The steel scrap must be uncoated unless permitted by joint agreement. Must be free of metallic copper, tin, lead ...
Manufactured by:Rimeco AS based inAabenraa, DENMARK
Iron chips may NOT contain plates, slag, grinding dust, gravure, moisture and similar materials The iron shavings must appear as a homogeneous product, dry (free of cutting agents), without visible impurities. Cast iron and steel chips shall be delivered in separate lots. No blending ...
Manufactured by:Rimeco AS based inAabenraa, DENMARK
Manganese scrap, preferably not more than 0,5 tons per. single part Items must be free from rubber, grease and oil. May contain wear parts such as chains, bells, shovels, hamsters and the like from heavy industry, iron scarves, hardened teeth from ...
Manufactured by:Rimeco AS based inAabenraa, DENMARK
Fragmentised incinerator scrap. Loose steel scrap processed through an incinerating plant for household waste followed by magnetic separation, fragmentised into pieces not exceeding 200 mm in any direction and consisting partly of tin coated steel cans. Should be prepared in a manner to ensure direct charging. The scrap shall be free of excessive moisture and rust. Must be free of excessive ...
Manufactured by:Rimeco AS based inAabenraa, DENMARK
MINIMUM thickness 3mm for items & 8mm for pipes MAXIMUM sizes 1,5 x 0,5 x 0,5 m (sales). Combustion engines are not allowed, the items must be free of grease, oil, bearings, rent houses, linings and the like, which in the worst case can cause explosions, thicknesses should preferably be above 25 mm to ensure low phosphorus content (sales). MAXIMUM piece weight 1 ...
Manufactured by:Rimeco AS based inAabenraa, DENMARK
Old thin steel scrap predominantly less than 6 mm thick in sizes not exceeding 1.5 x 0.5 x 0.5 m, prepared in a manner to ensure direct charging. If greater density is required, it is recommended that maximum 1 meter is ...
Manufactured by:Rimeco AS based inAabenraa, DENMARK
MINIMUM thickness 6 mm. MAXIMUM size 1,5 x 0,5 x 0,5 m. Steriles are not accepted. Thick new production steel scrap predominantly more than 6mm thick prepared in a manner to ensure direct charging. The steel scrap must be uncoated unless permitted by joint agreement and be free of rebars and merchant bars even from new production. Must be free of metallic copper, tin. lead (and alloys), ...
Manufactured by:Rimeco AS based inAabenraa, DENMARK
Can normally be accepted in size up to 600 mm, but the standard is 400 mm. Screws / spikes / under plates is not allowed. Rail changers / crossings are only allowed subject to an separate ...
Manufactured by:Rimeco AS based inAabenraa, DENMARK
Old thick steel scrap, predominantly more than 6 mm thick in sizes not exceeding 1.5 x 0.5 x 0.5 m, prepared in a manner to ensure direct charging. May include tubes and hollow sections. Excludes vehicle body scrap and wheels from light vehicles. Must be free af rebars and merchant bars, free of metallic copper, tin, lead (and alloys), mechanical pieces and steriles to meet the aimed analytical ...
Manufactured by:Rimeco AS based inAabenraa, DENMARK
There must be no heavy steel parts Ike spindles for lathe, heavy construction steel, forks etc. as they can cause damage to equipment. Splinters, incinerators and tires are not allowed. Frag feed usually consist of municipal iron, radiators, roof tiles, frames, tanks (blank), hoods, cages, cars (environmentally treated), white goods, etc. 3% impurities can be accepted - but not steriles, ...
Manufactured by:Rimeco AS based inAabenraa, DENMARK
Shredded steel scrap. Old steel scrap fragmentized into pieces not exceeding 200 mm in any direction for 95 % of the load. No piece, in the remaining 5 %, shall exceed 1000 mm. Should be prepared in a manner to ensure direct charging. The scrap shall be free of excessive moisture, loose cast iron and incinerator material (especially tin cans). Must be free of metallic copper, tin, lead (and ...