- Home
- Equipment
Refine by
Roth Environmental Equipment & Supplies
17 equipment items found
Distributed by:Pipes Plus LLC based inCatskill, NEW YORK (USA)
The Roth MultiTank is the first tank of its kind. It can be used for water cistern, pump, holding, rainwater or septic tank. This is possible due to its special construction of an inner layer of FDA approved virgin HDPE, two inside layers of PE for improved stability, plus one outer layer of black and UV-stabilized PE. Not only is it special in terms of its construction, it also has the ...
Manufactured by:Roth Pump Company based inRock Island, ILLINOIS (USA)
Roth offers sealless magnetically driven pumps, which require an NPSHr of only 1 ft (0.30m) FULL CURVE. These pumps can produce any level of differential pressure to 1500 ft (457m) (this pressure is 900 ft (274m) greater than centrifugal pumps) and capacities from 4 to 180 GPM (0.91 to ...
Manufactured by:Carl Roth GmbH Co. KG based inKarlsruhe, GERMANY
1 kg neutralises approx. 1 l ammonia solution (25%), 1 l potassium hydroxide solution (50%) or ¾ l sodium hydroxide solution ...
Manufactured by:Roth Pump Company based inRock Island, ILLINOIS (USA)
End Mounted industrial pumps for non-lubricating liquids up to 100 GPM & 100 PSI. Roth end mounted industrial pumps have been proved in the field for 35 years on hot water, low NSPH, vacuum evacuation, and suction lift. Drip proof bearing frame, sealed bearing, stainless steel shaft, renewable liners, and mechanical seals for low and high pressure make this pump the most versatile industrial ...
Manufactured by:Roth Pump Company based inRock Island, ILLINOIS (USA)
Developed to pump 230˚F deaerated water from the deaerator to the boiler. This original design has now been improved to include high capacity models fully functional at one foot NPSH. All Roth one foot NPSH deaerator pumps are end mounted with two moisture protected ball bearings. No process lubricated ...
Manufactured by:Carl Roth GmbH Co. KG based inKarlsruhe, GERMANY
PC-controlled imaging system, e.g. for recording DNA/RNA bands in agarose gels or protein bands in polyacrylamide ...
Manufactured by:Roth Pump Company based inRock Island, ILLINOIS (USA)
Roth 212 ° F (100 ° C) Steam Condensate Return Stations are designed to handle water near or at the boiling point. Low NPSH submerged pumps provide full capacity at any liquid temperature up to 212 ° F (100 ° C). These units will deliver hot water at temperatures up to 212 ° F (100 ° C) and will not vapor bind at 212 ° F (100 ° ...
Manufactured by:Roth Pump Company based inRock Island, ILLINOIS (USA)
Roth Low NPSH chemical pumps provide continuous, high pressure pumping of non-lubricating and corrosive liquids at only 1 ft. (0.30m) NPSH. These pumps are designed to pump a wide variety of chemicals including liquefied gases from 4 to 150 GPM (0.91 to 34m3/hr) with process heads up to 1600 ft. (448m) TDH, and temperatures from -150° to +450°F (-100° to +232°C). Front pull-out ...
Manufactured by:Roth Pump Company based inRock Island, ILLINOIS (USA)
Roth high pressure, low NPSH, multi-stage chemical pumps solve the most difficult pumping problems. These pumps can handle continuous non-pulsating differential pressures up to 2000 psi (141 kg/cm2) and up to 5400 ft. (1646m)TDH. They provide low NPSH and are quiet, too. Capacity 4 - 150 GPM (.912 to 34 m3/hr). The non-pulsating discharge pressure makes the Roth pump ideal for de-superheating ...
Manufactured by:Carl Roth GmbH Co. KG based inKarlsruhe, GERMANY
TEA, Tris-(2-hydroxyethyl)-amine. Empirical formula C6H15NO3. Molar mass (M) 149,19 g/mol. Density (D) 1,12 g/cm³. Boiling point (bp) 360 °C. Flash point (flp) 190 °C. Melting point (mp) 23 °C. WGK 1. CAS No. [102-71-6]. EG-Nr. ...
Manufactured by:Roth Pump Company based inRock Island, ILLINOIS (USA)
Roth Pump standard steam condensate return transfer stations are the most popular and meet most water applications. These units will deliver hot water at temperatures up to 200˚F (93˚C) and will not vapor bind at 210˚F (98˚C). Receiver capacities from 8 (30 liters) to 50 gallons (189 liters) can be supplied on these standard condensate ...
Manufactured by:Roth Pump Company based inRock Island, ILLINOIS (USA)
Roth multistage feedwater pumps deliver high pressures per stage at 1750 RPM. 2, 3, 4, and 6 stages can be combined in a single regenerative turbine pump. Each stage approximately multiplies the differential pressure by the number of total impellers. The Roth multistage pump design incorporates the possibility of module staging so that operation is at the point of peak efficiency, thus reducing ...
Manufactured by:Roth Pump Company based inRock Island, ILLINOIS (USA)
Advanced two stage pump for intermittent or continuous high pressure pumping of hot chemically treated feed water. Designed to deliver high pressure at medium to low capacities without cavitation. Roth high pressure boiler feed pumps provide reliable service operating at a low 1750 RPM further shielding parts from particle abrasion and wear. All Roth high pressure boiler feed pumps are two stage ...
Manufactured by:Roth Pump Company based inRock Island, ILLINOIS (USA)
Roth regenerative turbine chemical duty pumps provide continuous, high pressure pumping of non-lubricating and corrosive liquids. These regenerative turbine pumps are provided with one piece, machined self-centering impellers for operation with a wide variety of chemicals with process heads up to 1400 ft. (427 m.), 600 psi (40 bar), TDH at 3500 rpm, NPSH from 3 to 14 ft. (0.91 to 4.2 m.), and ...
Manufactured by:Roth Manufacturing, based inLoyal, WISCONSIN (USA)
Two — not just one, greaseable, bronze pillow-block bearings on each idler, drive and cross shaft... for longer sprocket, shaft and bearing ...
Manufactured by:Carl Roth GmbH Co. KG based inKarlsruhe, GERMANY
Stand clamp Die-cast zinc, 20-40 mm. Material: Die-cast zinc powder-coated, Clamps with cork inlays. With two round jaws. ...
Manufactured by:Carl Roth GmbH Co. KG based inKarlsruhe, GERMANY
For annealing and incineration of samples, as well as for the production of oxygen melts for the detection of chromium, manganese, etc. and for bead tests. Dimensions: Length 100 mm x width 9 ...