- Home
- Equipment
Refine by
Stanelle Environmental Equipment & Supplies
11 equipment items found
Manufactured by:Stanelle Silos + Automation GmbH based inGüglingen-Frauenzimmern, GERMANY
The Stanelle overpressure/vacuum flap is a safety component for silos loaded with compressed air systems. During pneumatic loading processes the combined action of these flaps can compensate for both overpressure and vacuum generated by exhaust fans or collapsing cornices - and so prevent expensive damage to ...
Manufactured by:Stanelle Silos + Automation GmbH based inGüglingen-Frauenzimmern, GERMANY
The Stanelle Silo filter Type PNEUFIX is suitable for the de-dusting of pneumatically or mechanically conveyed filling, continuous and discontinuous, or conveying-processes in silos or bunkers. The PNEUFIX performs due to its rugged construction and its wide range of ...
Manufactured by:Stanelle Silos + Automation GmbH based inGüglingen-Frauenzimmern, GERMANY
The Stanelle Butterfly Valves: simple, rugged components for a wide variety of application conditions. Everywhere where flexible connection is required. A rubber or a cloth collar (or the like) carries over the connection to the flow-operated element. Typical example: Between silo and scale, sieving machine, conveying screw, rotary feeder, etc. For both basic units there are three operating ...
Manufactured by:Stanelle Silos + Automation GmbH based inGüglingen-Frauenzimmern, GERMANY
The SMFS type flat gate is attached to silo and vessel discharges and assures optimal sealing of stored dusty and granular bulk goods up to 8 mm grain size. This modular gate allows the installation of manual, pneumatic, or electric motor drives on the same base ...
Manufactured by:Stanelle Silos + Automation GmbH based inGüglingen-Frauenzimmern, GERMANY
The Stanelle round gate functions as a shutoff component or sandwich fitting with hand wheel or pneumatic actuation. When the installed gate is pressurized on one side the pressure is directed on the plate and therefore on the case gasket for the optimal sealing properties. ...
Manufactured by:Stanelle Silos + Automation GmbH based inGüglingen-Frauenzimmern, GERMANY
The Stanelle segment lock will be mounted at silo and container outlets and will be used for shut-off and dosing of coarse-grained bulk materials. ...
Manufactured by:Stanelle Silos + Automation GmbH based inGüglingen-Frauenzimmern, GERMANY
Stanelle de-dusting filters are specifically suited for filtration of exhaust air during pneumatic filling of silos with pulverized, dry, bulk materials in the building- and non metallic mineral ...
Manufactured by:Stanelle Silos + Automation GmbH based inGüglingen-Frauenzimmern, GERMANY
The Stanelle silo overfill protection is a self contained system. Ready to install in conjunction with the provided pinch valve, max sensor and end surge limiter this controller prevents the silo from overfilling and the silo's interior pressure from exceeding the max value. In addition the controller can also integrate the dedusting filter installed on the ...
Manufactured by:Stanelle Silos + Automation GmbH based inGüglingen-Frauenzimmern, GERMANY
The air jet loosening system is used to fluidize poorly flowing, technically dry, non-sticky, powdery products. The advantage of the air jet loosening system is that the jets are not located directly in the bulk material stream and can be replaced from the ...
Manufactured by:Stanelle Silos + Automation GmbH based inGüglingen-Frauenzimmern, GERMANY
The Stanelle Mixer Filter Type MIXFI is designed for the direct dedusting of batch mixers. During the design stages the focus was placed specifically on the problem-free return of filter dust to the mixer. The choice of high-quality materials and the optimal surface lining make this filter ideal for applications on virtually all ...
Manufactured by:Stanelle Silos + Automation GmbH based inGüglingen-Frauenzimmern, GERMANY
The Stanelle discharge vibrating cage functions as a discharge aid for all poorly flowing, bridge building, dry, dust-like to granular bulk goods. Major advantage over air operated systems is that the discharged bulk materials do not contain fluidizing air. This has positive effects during bagging as well as when loading special bulk materials into silo vehicles. The flanged design with 60° ...