- Home
- Equipment
Refine by
Varacorp Environmental Equipment & Supplies
8 equipment items found
Manufactured by:VaraCorp LLC based inWimberley, TEXAS (USA)
Legs are made of polyethylene. Each of the four legs inserts into a mounting cavity in the pontoons. Each leg is held in place by a Schedule 80, 2-inch threaded end cap. Legs are designed to prevent the rotating turbine from striking the bottom of the lagoon in low water conditions. The legs can accommodate air shaft lengths up to four feet. The legs have air holes at the top and the bottom to ...
Manufactured by:VaraCorp LLC based inWimberley, TEXAS (USA)
The panel comes standard with Contact or Manual Motor Starter, and Hand-Off-Auto Switch. The Manual Motor Starter includes short circuit protection, overload protection, and through-the-door operator. The durable, high impact, poly carbonate, gasket enclosure is NEMA 4X rated for outdoor or indoor use. Will never rust nor splinter. Impervious to H2S gas. Never needs ...
Manufactured by:VaraCorp LLC based inWimberley, TEXAS (USA)
VaraCorp offers the proper wire size for your application, pre-wired to the motor. VaraCorp offers the proper wire for your application, pre wired to the motor with strain-relief connectors. All wire is suitable for underwater use and is oil ...
Manufactured by:VaraCorp LLC based inWimberley, TEXAS (USA)
Many of VaraCorp’s clients ask us to provide the guy wire to anchor the floating pontoons to the sides of the pit. VaraCorp recommends that ¼-inch stainless steel cable be used to secure the pontoons in the pit or lagoon. We also provide the clamps, thimbles, and other rigging needed with the guy wire. Our assembly instructions give details on how and where to secure the rigging from ...
Manufactured by:VaraCorp LLC based inWimberley, TEXAS (USA)
Floating Wastewater Aeration Unit – 5 Horsepower. Motor: 5-hp, 3-phase, 60 hertz, industrial grade. Pontoons: ¼-inch thick polyethylene shell, filled with closed-cell foam, UV protected. Driveshaft/Air shaft: 1 ½-inch diameter, 316 stainless steel, ¼-inch wall thickness, 3.5 feet long as standard length. Turbine: High density nylon impregnated with 30 % fiberglass for ...
Manufactured by:VaraCorp LLC based inWimberley, TEXAS (USA)
VaraCorp offers a reliable and cost-effective surface aerator designed specifically for industrial settings such as breweries, wineries, and other facilities dealing with substantial wastewater management challenges. Their aerator is engineered to efficiently break down sludge and facilitate the movement of wastewater, thereby preventing backup issues that can damage properties or industrial ...
Manufactured by:VaraCorp LLC based inWimberley, TEXAS (USA)
Variable Frequency Drive (VFD) with its starter boxes. The VFD provides protection for over-current, phase loss, unbalanced voltage, motor stall, a short circuit, and a ground fault, to name a few. All of these features will be preset for you at the factory according to the specifications of our engineers. The VFD also makes it possible to slow-start the motor, meaning that the rpm of the motor ...
Manufactured by:VaraCorp LLC based inWimberley, TEXAS (USA)
Surface aerator systems are essential in water treatment processes due to their ability to enhance the water quality by increasing dissolved oxygen levels. These systems are integral in maintaining aquatic life and facilitating the breakdown of pollutants. Their design ensures energy efficiency, reducing operational costs significantly. Surface aerators also help in minimizing odors caused by ...