- Home
- Equipment
Refine by
Wessels Environmental Equipment & Supplies
36 equipment items found
Manufactured by:Wessels Company based inGreenwood, INDIANA (USA)
Wessels Glymatic system consists of a free-standing solutions reservoir that contains the glycol/water or water solution at atmospheric pressure. A pressurization assembly is mounted on the solutions reservoir’s high density polymer cover, keeping the pressurization unit off the floor. The Glymatic automatic make-up package utilizes a pressurization station designed to draw fluid from a 6 ...
Manufactured by:Wessels Company based inGreenwood, INDIANA (USA)
The diaphragm tank has been developed to allow the systems air cushion to be separated from the systems water. No waterlogging of the tank can occur as the air is held between the tank wall and the outside of a bladder placed inside the tank, while the system water is contained inside the bladder. This changes the system to an air elimination system, as any air extracted from the system water is ...
Manufactured by:Wessels Company based inGreenwood, INDIANA (USA)
Whale has led the way since way back in the ‘40s with ground breaking pump design through to recent innovation leaps in intelligent control electronic pump systems and gas / electric heating systems for water and space in recreational ...
Manufactured by:Wessel-Hydraulik GmbH based inWilhelmshaven, GERMANY
The throttle check valve TCV is generally suitable for setting the movement speed in a certain flow direction. Another application is to prevent cavitation and thus too high extending speed of cylinders, which are caused by pulling ...
Manufactured by:Wessels Company based inGreenwood, INDIANA (USA)
Bladder tanks are required in a closed loop heating or chilled water HVAC system to absorb the expanding fluid and limit the pressure within a heating or cooling system. A properly sized expansion or compression tank will accommodate the expansion of the system fluid during the heating or cooling cycle without allowing the system to exceed the critical pressure limits of the system. The expansion ...
Manufactured by:Wessel-Hydraulik GmbH based inWilhelmshaven, GERMANY
In case of a pipe or tube rupture load control valves avoid uncontrolled movement of the cylinder. They also serve for an exact and stable positioning of the boom and enable sensitive and even movement processes. Load control valves can compensate for leakages on the main control valves in older construction machines.The design LHB 4-N is characterized by a stepped design, which optimally affects ...
Manufactured by:Wessel-Hydraulik GmbH based inWilhelmshaven, GERMANY
In case of a pipe or tube rupture load control valves avoid uncontrolled movement of the cylinder. They also serve for an exact and stable positioning of the boom and enable sensitive and even movement processes. Load control valves can compensate for leakages on the main control valves in older construction machines. The type LHB 4-K is characterized by a very compact design and is therefore ...
Manufactured by:Wessel-Hydraulik GmbH based inWilhelmshaven, GERMANY
In case of a pipe or tube rupture load control valves avoid uncontrolled movement of the cylinder. They also serve for an exact and stable positioning of the boom and enable sensitive and even movement processes. Load control valves can compensate for leakages on the main control valves in older construction machines. The design LHB 3-R performs an internal regeneration circuit. The returning ...
Manufactured by:Wessel-Hydraulik GmbH based inWilhelmshaven, GERMANY
Flow control valves of this product group are used to supply single acting hydraulic consumers, such as hydraulic motors, hydraulic hammers, etc. with a controlled flow rate. This volume flow is divided of a main volume flow by means of the flow control valve. The flow control valve of the design 1N can be used as a 2-way or 3-way flow controller (pressure compensator) for flows up to 200 l / min ...
Manufactured by:Wessel-Hydraulik GmbH based inWilhelmshaven, GERMANY
WESSEL flow divider valves divide the input volume flow in a specific ratio into two partial volume flows. The partial volume flows can have the same value or different, but the division ratio remains constant regardless of the difference between the inlet pressure and the load ...
Manufactured by:Wessel-Hydraulik GmbH based inWilhelmshaven, GERMANY
The flow divider valve type FDV-CA divides a volume flow independent of the pressure conditions into two fixed partial flows. There are different cartridges and thus division ratios available. The valve is also available as a complete solution in the associated ...
Manufactured by:Wessel Kessel- und Apparatebau GmbH based inXanten, GERMANY
The metal separators are fitted with a strong inner magnetic drum, which can separate the tiniest iron particles from the product stream. Depending on the kind of incoming material, the outer drum made of high-grade steel, or managese steel in the case of abrasive material, is ...
Manufactured by:Wessel Kessel- und Apparatebau GmbH based inXanten, GERMANY
After pellet pressing the material is cooled down. This leads to hardening and the form stability of the pellets for their subsequent storage. The coolers, operated in the counter flow principle, ensure efficient cooling with a relatively low cooling air ...
Manufactured by:Wessel Kessel- und Apparatebau GmbH based inXanten, GERMANY
Conveyor screws are manufactured according to the case of application and customer requests. They can be manufactured in diameters of 100 - 1000 mm and lengths of 1 - 10 m. In general, normal steels, high-grade steels or even wearresistant manganese steels are used to produce the screws. The image shows a pipe conveyor screw in special execution, made of material 1.4301, for filling potato ...
Manufactured by:Wessel Kessel- und Apparatebau GmbH based inXanten, GERMANY
The pellets are extremely carefully conveyed thanks to the round trough form and the semicircular drivers, meaning that only a very low amount of abrasion is produced when conveying the pellets. The chain conveyors are manufactured in widths from 150 mm to 600 mm, with which an output of 5 to 80 t/h pellets can be achieved. Upward gradients of up to 40° are possible thanks to a special curved ...
Manufactured by:Wessel-Hydraulik GmbH based inWilhelmshaven, GERMANY
Priority valves are used to supply an additional consumer with a preferred volume flow. The remaining volume flow is provided to supply the existing main function on the ...
Manufactured by:Wessels Company based inGreenwood, INDIANA (USA)
Wessels type NLA removable bladder expansion tanks are designed for use in hydronic heating/cooling systems to absorb the expansion force resulting from the changes in temperature of the heating/cooling fluid. They’ve been intelligently designed to include a WessView bladder integrity monitor and integrated air-side pressure ...
Manufactured by:Wessels Company based inGreenwood, INDIANA (USA)
Wessels Type NLA-WG Smart Tanks are ASME removable bladder type pre-charged expansion tanks with WessGuard® bladder monitor. They are designed to absorb the expansion forces and control the pressure in heating/cooling ...
Manufactured by:Wessels Company based inGreenwood, INDIANA (USA)
Wessels ASME Multi-Purpose Tanks (WMT) are designed for multiple functions. The four multi-configurable connections allow for primary/secondary hydraulic separation with buffer energy storage for either hot or chilled water systems. The buffer volume slows fluid velocity resulting in increased air elimination. The included WesPro Super Filter Baffle coalescing media further increases air & ...
Manufactured by:Wessel-Hydraulik GmbH based inWilhelmshaven, GERMANY
Flow control valves of this product group are used to supply single acting hydraulic consumers, such as hydraulic motors, hydraulic hammers, etc. with a controlled flow rate. This volume flow is divided of a main volume flow by means of the flow control valve. The flow control valve of the design 2N can be used as a 2-way or 3-way flow controller (pressure compensator) for flows up to 550 l / min ...