- Home
- Equipment
Refine by
Agar Environmental Equipment & Supplies
21 equipment items found
Manufactured by:Agar Corporation Ltd. based inHouston, TEXAS (USA)
Agar Multiphase Flow Meter MPFM-50 provides accurate, real-time measurements of oil, water and gas flows simultaneously without separation of the phases. Specially designed for low maintenance and ease of operation, they require no field calibration or prior knowledge of fluid properties (such as fluid density and salinity) to attain the specified accuracies. The real-time data capabilities of ...
Manufactured by:Indus Agar s.a. based inSantander (Cantabria), SPAIN
Agar pinch valves are designed to work efficiently in most extreme conditions. Under the principles of simplicity, efficiency and economy the Agar® pinch valve represents a reliable and high quality product with low maintenance ...
Manufactured by:Indus Agar s.a. based inSantander (Cantabria), SPAIN
The Agar automated valve provides an effective control of the industrial process during closing and opening operations. Its functional design ensures easy installation and easy replacement of the elastic ...
Manufactured by:Indus Agar s.a. based inSantander (Cantabria), SPAIN
Horizontal centrifugal pumps “H” for large flows with a low total head. Main application pulps with lumps of a certain ...
Manufactured by:Indus Agar s.a. based inSantander (Cantabria), SPAIN
Horizontal centrifugal pumps “MP” are mainly used for sorting solids by means of cyclone separators. very common industrial process in the mining and quarrying sector, which requires precise conditions for pumping pulp with fine particle sizes in ...
Manufactured by:Agar Corporation Ltd. based inHouston, TEXAS (USA)
Consists of a primary insertion-type probe featuring an insertable sensor with a seal housing for installation and retraction while the pipeline is in service and under pressure for flow lines 6” and larger. The OW-302 is mounted perpendicular to the flow in a vertical section with ascending flow at a point where the fluids are well mixed to ensure proper measurement. Common installation ...
Manufactured by:Agar Corporation Ltd. based inHouston, TEXAS (USA)
Oil/water monitor designed for service in line sizes from 2” to 6” and water cut ranges of 0-100%. This water-cut monitor measures liquid-in-liquid concentrations using microwave absorption ...
Manufactured by:Agar Corporation Ltd. based inHouston, TEXAS (USA)
Insertion-type oil/water monitor designed for service in line sizes 6” and above and water cut ranges of 0-100%. This water-cut monitor measures liquid-in-liquid concentrations using microwave absorption ...
Manufactured by:Agar Corporation Ltd. based inHouston, TEXAS (USA)
The ID-200 Series Interface Detectors are used for interface measurement and control in all types of liquid/liquid and vapor/liquid separation processes including emulsions and ...
Manufactured by:Agar Corporation Ltd. based inHouston, TEXAS (USA)
The ID-200H Series are 2 wire 4-20mA loop powered probes used for interface measurement and control in all types of liquid/liquid and vapor/liquid separation ...
Manufactured by:Agar Corporation Ltd. based inHouston, TEXAS (USA)
Based on Agar’s Interface Detector (ID), the Profiler ID-201P consists of multiple sensors mounted on a single shaft. Each Agar sensor has the ability to generate a measurement that represents either a single point or a section along the ...
Manufactured by:Aqwise Wise Water Technologies based inYokneam, ISRAEL
The AGAR® RF (Roughing Filter) MBBR consists of two biological stages: a preliminary small volume AGAR®MBBR reactor followed by AS (Activated Sludge). This configuration utilizes the MBBR capability to significantly reduce wastewater organic load in a relatively small reactor volume filled with Aqwise Biomass Carriers, followed by the high-quality effluent achievable in an activated ...
Manufactured by:Aqwise Wise Water Technologies based inYokneam, ISRAEL
The AGAR® (Attached Growth Airlift Reactor) technology is an Aqwise proprietary process that utilizes biofilm grown on carrier media, to aerobically degrade soluble pollutants in wastewater. The AGAR® technology has been successfully implemented in many wastewater treatment plants around the ...
Manufactured by:Aqwise Wise Water Technologies based inYokneam, ISRAEL
The AGAR® (Attached Growth Airlift Reactor) technology is an Aqwise proprietary process that utilizes biofilm grown on carrier media, to aerobically degrade soluble pollutants in wastewater. The AGAR® IFAS (Integrated Fixed-film Activated Sludge) combines a conventional activated sludge process with MBBR into one integrated system. The solution can be implemented in both municipal and ...
Manufactured by:Aqwise Wise Water Technologies based inYokneam, ISRAEL
The Aqwise AGAR® Media Clarifier (AGAR® MC) is an innovative patented solid-separation technology, designed specifically for MBBR effluent. The AGAR® Media Clarifier was developed by Aqwise to cope with the unique characteristics of suspended solids and sloughed biomass from an MBBR WWTP. The revolutionary AGAR® MC uses carefully tested hydraulic flow patterns alongside ...
Manufactured by:Indus Agar s.a. based inSantander (Cantabria), SPAIN
The elastic sleeve is the only part in contact with the fluid to be ...
Manufactured by:Agar Corporation Ltd. based inHouston, TEXAS (USA)
Designed for service in line sizes up to 4” and watercut ranges 0-100%. Using microwave technology to measure liquid-in-liquid concentrations, it measures hydrocarbon/water mixtures over the full range of ...
Manufactured by:Indus Agar s.a. based inSantander (Cantabria), SPAIN
Vertical centrifugal pumps “V” are partially submerged in the fluid to be handled. AGAR vertical pumps main advantage is their easy start-up since there is no need for packing nor any refrigeration system. Vertical pumps are installed mainly in slurry collection wells for its transportation within the different treatment stages. ...
Manufactured by:Indus Agar s.a. based inSantander (Cantabria), SPAIN
With continued use of centrifugal pumps, the wear parts are subject to natural wear. For this reason Indus Agar offers the service of collecting these parts to be recoated in the factory. The new rubber coating restores the parts to a perfect condition for ...
Manufactured by:Indus Agar s.a. based inSantander (Cantabria), SPAIN
All fittings for AGAR centrifugal pumps are fully coated in rubber (except the suction ...