- Home
- Equipment
Refine by
Anderson Environmental Equipment & Supplies
34 equipment items found
Manufactured by:Anderson Feed Technology based inStow, OHIO (USA)
Anderson Feed Technology Chain conveyors are sturdy enough to convey the most difficult bulk materials. Conveyors are unmissable in modern feed mills. The chain conveyors are available in capacities up to 14000 ft3/h. These conveyors are ideal for conveying over long ...
Manufactured by:Anderson Feed Technology based inStow, OHIO (USA)
Anderson Feed Technology Flight conveyors are used for applications that have the most strict hygienic demands. The conveyors are suitable for conveying practically all powders and granulates. Capacities range from 1000 up to 14000 ft3/h. These conveyors are capable of inclined conveying up to an angle of ...
Manufactured by:Clark-Reliance Corporation based inStrongsville, OHIO (USA)
The Anderson Filter Separator is a multi-stage separator that provides optimal removal of both Liquids and Solids from a gas stream. As the contaminated gas passes through the filter separator it must pass through several distinct regions or stages. Each stage has a specific purpose, and the cumulative effect provides a virtual contaminant-free ...
Manufactured by:Anderson Manufacturing, Inc. based inCamilla, GEORGIA (US) (USA)
G.V.W.R. - 1,900 #. G.A.W.R.- 2,000 #. Coupler - 2”. Safety Chain - 3/16” grade 41 with hooks. Frame - 3”x 2”x 3/16” angle. Crossmembers - top 3”x2” x 3/16 angle. Fenders - 9” x 32” flat top jeepstyle. Axle - 2,000 # E-Z lube. Suspension - Multi-leaf spring. Tires - ST 175-80D-13” load range B. Wheel - 13” 5 bolt white spoke. Deck ...
Manufactured by:Anderson Manufacturing, Inc. based inCamilla, GEORGIA (US) (USA)
15” White Spoke Rims. Pressure Treated Floor. Light Protectors. Electric Breakaway. E-Z Lube ...
Manufactured by:Anderson Manufacturing, Inc. based inCamilla, GEORGIA (US) (USA)
15” White Spoke Rims. Pressure Treated Floor. Adjustable Coupler. Electric Breakaway. E-Z Lube ...
Manufactured by:Clark-Reliance Corporation based inStrongsville, OHIO (USA)
All Anderson Line Separators are designed to eliminate all liquid entrainment of 8-10 microns or larger from air, gas, steam and vapor pipelines without causing any significant pressure ...
Manufactured by:Clark-Reliance Corporation based inStrongsville, OHIO (USA)
The Anderson CL Coalescing Separator is used in applications where liquid particles exist as an aerosol or a mist, and must be removed from a gas ...
Manufactured by:Clark-Reliance Corporation based inStrongsville, OHIO (USA)
The success of the Anderson Separation Vane is rooted in simple physics principles of centrifugal force, impingement and gravity. The condensate laden steam entering the vane bank separator is a mixture of low-density steam and high-density water. As the mixture passes through the vane bundle, it is forced to change directions several times. The low-density steam can easily negotiate this ...
Manufactured by:Anderson International Corp based inStow, OHIO (USA)
The Dox (Dry Oilseed EXtruder) is designed to mechanically shear, cook, and dry the material being processed for improved oil recovery. The high-shear environment ruptures the oil-containing bodies within the oilseed and generates frictional heat. This heat deactivates harmful enzymes within the oilseed, flash-dries excess moisture, and cooks the proteins for a more efficient ...
Manufactured by:Anderson International Corp based inStow, OHIO (USA)
The most durable press in the oilseed extraction industry today. With earlier models from the 1920s still in operation today, the Duo™ Series Expeller® presses are hands down the most durable and long-lasting presses ever produced for the vegetable oil/oilseed extraction industry. No press has been more widely used on a greater variety of applications than the Duo. The Duo Series ...
Manufactured by:Anderson Manufacturing, Inc. based inCamilla, GEORGIA (US) (USA)
G.V.W.R.: 7,000#. G.A.W.R.: Each Axle – 3,500#. Coupler: 2″ – Adjustable Bolt-On. Safety Chain: 8/0 Grade 30 w/ Hooks. Jack: 3K Top Wind. Tongue: Wrapped 5″ Channel. Frame: 2x5x3/16″ Tube. Crossmembers: 3” Channel w/16″ Centers. Fenders: 9×72″ Diamond Plate w/ Steps. Ramps: 5′ Runner STyle Slide-Out/Hideaway . Axle: (2) 3,500# Cambered ...
Manufactured by:Groupe Anderson Inc. based inChesterville, QUEBEC (CANADA)
The pull type A1230 triple auger mixer (conveyor discharge) becomeS a perfect solution with their distribution conveyor ideal for fibrous rations. The cross conveyor ensures even and prompt distribution to the left or right regardless of the prepared ration. Anderson knows it is with high quality raw materials that we manage to achieve nutritional goals and high production. The mixing rate should ...
Manufactured by:Anderson Instrument Co. LLC based inFultonville, NEW YORK (USA)
Anderson-Negele’s ILM-4 inductive conductivity sensor-transmitter offers an all in one design that makes integration and commissioning a fast and simple task. Built with flexibility in mind, the ILM can offer multiple outputs freely configurable to multiple conductivity measurements at independant ranges or a combination of conductivity and temperature. Unlike other inductive sensors, the ...
Manufactured by:Anderson Instrument Co. LLC based inFultonville, NEW YORK (USA)
The Anderson ITM-3 combines a proven optical backscatter light technology with the latest generation of electronics to provide an expanded feature set and simple user interface yielding a highly adaptable optical sensing device. Standard features of the ITM-3 include a 4-20mA output of the measured turbidity which can be assigned to 5 selectable ranges that can be programmed via the internal ...
Manufactured by:Anderson Feed Technology based inStow, OHIO (USA)
Anderson Feed Technology Bucket elevators are robust conveyors for a wide range of bulk materials, both granular and powders. Belt speed is 5.9 ft/s for gentle handling of pellets or ‘sticky’ products like meal. A belt speed of 8.5 ft/s used for maximum capacity with grains and other free-flowing granular products. Available in capacities up to 14000 ...
Manufactured by:Anderson Instrument Co. LLC based inFultonville, NEW YORK (USA)
Anderson Instrument Company’s “SL” Level Transmitter is the latest innovation for measuring liquid level in sanitary applications. The “SL” Transmitter incorporates state of the art design to provide superior accuracy and long term signal stability. The field tested performance of the “SL” transmitter means the elimination of expensive, repetitive ...
Manufactured by:Anderson Feed Technology based inStow, OHIO (USA)
Anderson Feed Technology has developed screw conveyors for multiple applications. The screw conveyors are used for dosing, extracting, feeding and conveying purposes. Use of high-quality components makes for a reliable and easily serviceable conveyor. A sturdy design ensures a long and trouble free service life. Anderson screw conveyors are available in a wide range of ...
Manufactured by:Central States Industrial Equipment and Service, Inc. (CSI) based inSpringfield, MISSOURI (USA)
Central States Industrial (CSI) offers a complete line of flow meters from Anderson-Negele that are optimal for a variety of fluids across the market. Whether you are measuring conductive fluids—receiving, batching, timing, or blending—or non-conductive fluids like sugars and oils, CSI has the right instrument to meet your needs. Anderson-Negele goes a step further by providing ...
Manufactured by:Anderson Instrument Co. LLC based inFultonville, NEW YORK (USA)
The AJ-300 series drag pen style circular chart recorders are available as single or dual channel. A full PID controller option is also available. The AJ series is capable of accepting both RTD as well as mA input signals. Optional mA retransmission is also ...