- Home
- Equipment
Refine by
Atmi Environmental Equipment & Supplies
7 equipment items found
Manufactured by:ATMI based inMontigny le Bretonneux, FRANCE
The BIP STOP is a small float switch designed for the automatic control of small pumps (until 1.5 CV) .Thanks to its wide switching angle of 110º, the BIP STOP protects the pump's engine and the electrical panels from jerking. This feature is highly appreciated in agitated liquids. Also, it can detect the both high and low level in the same tank whose hysteresis does not exceed 1.5 ...
Manufactured by:ATMI based inMontigny le Bretonneux, FRANCE
The BIP STOP is a small float switch designed for the automatic control of small pumps (until 1.5 CV). Thanks to its wide switching angle of 110º, the BIP STOP protects the pump's engine and the electrical panels from jerking. This feature is highly appreciated in agitated liquids. Also, it can detect the both high and low level in the same tank whose hysteresis does not exceed 1.5 meter. ...
Manufactured by:ATMI based inMontigny le Bretonneux, FRANCE
This float switch is designed for the automatic control of pumps (until 1.5 CV) . Thanks to its wide switching angle of 120º, the BIP STOP protects the pump's engine and the electrical panels from jerking. This feature is highly appreciated in agitated liquids. Also, AT 120 can detect the both high and low level in the same tank whose hysteresis does not exceed 1.5 meter. These float level ...
Manufactured by:ATMI based inMontigny le Bretonneux, FRANCE
These water level control relays are normally-sensitive controllers that maintain liquids within the set limits between a maximum and minimum level and provide protection for submerged pumps against dry running. The sensitivity is fixed. The use of these types of electrical probes gives an extraordinary operational safety because these devices are not very sensitive to the conventional humidity ...
Manufactured by:ATMI based inMontigny le Bretonneux, FRANCE
This float level switch is a small diameter tubular float that has been designed to fit tanks and cisterns having restriced access. Its small 1" diameter allows it to pass through the narrow openings usually found on the side walls of tanks. As the liquid level reaches the float, the mechanical switch inside will tilt, thus closing or opening a circuit connected to an electrical panel. Thanks to ...
Manufactured by:ATMI based inMontigny le Bretonneux, FRANCE
This detector has a very strong special protection. In fact, it consists of a cast aluminum metal cage and a level detector for solid SOLIBA or SOLIBA EX P ATEX certified in zones 21, 22 (dust). The metal case allows, without any risk of deterioriation, the high point level detection of voluminous bulk solids as well as the stop of all types of conveyor systems when dealing with excessive-height ...
Manufactured by:ATMI based inMontigny le Bretonneux, FRANCE
This float level switch (NO or NC) is the economical version of the BIP STOP. Indeed, it is technically similar to the BIP STOP but equipped with a high quality PVC cable instead of a neoprene cable. Thanks to its wide switching angle of 100º, the BIP ECO protects the pump's engine and the electrical panels from jerking. This feature is highly appreciated in agitated liquids. Also, it can ...