- Home
- Equipment
Refine by
Automasjon Environmental Equipment & Supplies
6 equipment items found
Manufactured by:Automasjon og Data AS based inStavanger, NORWAY
Current sensors are normally divided into 2 groups, Single-point Current Meters and Current Profilers. Single-point current meters will only measure the current in the exact depth where they are installed, and as sea currents often tend to vary significantly with depth, it’s often preferred to measure the current profile for the entire water column by using a Current ...
Manufactured by:Automasjon og Data AS based inStavanger, NORWAY
The industry standard for Wave measurements is to use a buoy moored freely in the ocean transmitting data to shore or a nearby platform. This method has operational limitations that in many cases require other solutions. For offshore use, several other solutions based on down-looking radars or lasers exist and work reliably, depending upon location. Also systems based on using horizontally ...
Manufactured by:Automasjon og Data AS based inStavanger, NORWAY
Meteorological sensors normally includes sensors to measure Air Temperature, Air Humidity and Barometric Pressure. Rainfall sensors, Solar Radiation and others can also be included. A+D can deliver sensors from different manufacturers with different qualities, however only those robust enough to survive the harsh conditions offshore will be recommended. We have over 25 years of experience in ...
Manufactured by:Automasjon og Data AS based inStavanger, NORWAY
Motion sensors are normally based on angular or acceleration measurements. They are used for measuring a large number of parameters, such as Pitch, Roll, Heave, Surge, Sway, Yaw, Acceleration, Helideck Heave, Helideck Inclination, Heave Rate, Trim, List and others. Some of these parameters are measured directly by the sensors, others are calculated within the sensor or by accompanying software ...
Manufactured by:Automasjon og Data AS based inStavanger, NORWAY
Optical sensors for measuring Visibility and Cloud Height are traditionally used at airports and heliports, but are now also widely used offshore to improve safety in helicopter traffic. These sensors often use complicated lenses and optical components that is sensitive to vibration and mechanical shock. Special care therefore needs to be taken when locating and installing such sensors offshore, ...
Manufactured by:Automasjon og Data AS based inStavanger, NORWAY
Since their inception, we have been at the forefront of pioneering Helideck Monitoring Systems (HMS), driving the development and evolution of these essential solutions. Initially introduced as a proactive measure to enhance offshore helicopter operations’ safety and operational efficiency, HMS was designed to tackle maritime environments’ unpredictable and often severe challenges. ...