- Home
- Equipment
Show results for
Refine by
Binmaster Environmental Equipment & Supplies
8 equipment items found
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Measure levels of solids or liquids with the NCR-86 with a plastic horn antenna. Precise to ≤1 mm at distances up to 393 feet. An optional swivel mount provides aiming flexibility. Operates accurately in excessive dust, hot steam, and extreme ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Sealed bearing end prevents material packing and false alarms. Vertical extensions are used for top-mounted BMRX rotaries to get high-level alerts. Custom extensions are available up to 144”. BinMaster's sealed bearing end extensions use protective bearings to form a seal between the shaft and shaft guard, preventing false alarms caused by material packing. Consult with ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
IECEx/ATEX 3D Level Scanner - MV with 7.67” diameter horn, 20-32 VDC, 4-20 mA output, Modbus, and RS-485 communications. Accurate readings of level and volume of stored materials based on a 70º beam angle. Wider beam angle is appropriate for silos up to 45’ in diameter and 200’ tall, and where improved accuracy in smaller silos is required. Identical to the Model 3DLS-M, ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
IECEx/ATEX 3D Level Scanner - M with 7.67” diameter horn, 20-32 VDC, 4-20 mA output, Modbus, and RS-485 communications. Accurate readings of level and volume of stored materials based on a 70º beam angle. Wider beam angle is appropriate for silos up to 45’ in diameter and 200’ tall, and where improved accuracy in smaller silos is required. Unit comes with internal LCD ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
FVL-200 Laser level sensor, 35 ft. maximum measurement, Wireless LoRa output, includes standard -20°F to 120°F battery. Specifically designed for use with FeedView software. Requires BinCloud gateway with LoRa communicatons. Use SWVL-40 mounting ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Swivel mounting plate with 9" diameter flange with 4" ANSI bolt hole pattern with a 12" sliding rod with a 1" NPS fitting at the bottom. The adjustable rod allows the sensor to protrude up to 12" into the vessel. The swivel range is up to 13° for aiming radar level sensors. The mounting plate is machined from 30% glass-filled polypropylene. The tube is made from glass-filled nylon. The sensor ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The CNCR-190 is a compact 80 GHz radar for distances up to 98' (30m). It is installed using a polyurethane pigtail connection cable and has a top cable connection. These sensors are rated to IP66/IP68 (3 bar) with housings made from durable PVDF material that has excellent chemical, abrasion, flame resistance, and UV stability. The FKM seal provides heat and chemical resistance for long-lasting ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
WL-19 - Indoor / outdoor standard (-20ºF to +140ºF) wireless transceiver unit NEMA 4X with 900 MHz directional Yagi antenna, selectable 115 VAC / 230 VAC, RS-485 connection ...