- Home
- Equipment
Refine by
Calpeda Environmental Equipment & Supplies
13 equipment items found
Manufactured by:Calpeda S.p.A based inMontorso Vicentino, ITALY
Close-coupled peripheral pump (regenerative pump) with turbine impeller. Compact, patented construction with singlepiece motor casing and pump-side wall.Protected against water entering the motor from outside.CT: version with pump casing in cast iron.B-CT: version with pump casing in bronze (the pumps are supplied fully ...
Manufactured by:Calpeda S.p.A based inMontorso Vicentino, ITALY
NM, NM4 Close-coupled centrifugal pumps; electric motor with extended shaft directly connected to the pump up to 22 kW (15 kW for NM4). NMS, NMS4 Close-coupled centrifugal pumps, new bracket construction for standard motors (stub-shaft construction) with integrated thrust bearing. Rated speed of rotation (50 Hz): NM, NMS ≈ 2900 rpm. NM4, NMS4 ≈ 1450 rpm. Pump casing with axial suction ...
Manufactured by:Calpeda S.p.A based inMontorso Vicentino, ITALY
Single-stage end-suction centrifugal pumps, with bearing bracket. The electropumps N, B-N, N4, B-N4 series comply with the European Regulation no. 547/2012 in force starting from 01.01.2013. Nominal duty points and main dimensions in accordance with EN 733. Back Pull-Out construction, for simple and quick dismantling and reassembly. N, N4: version with pump casing and lanter bracket in cast iron. ...
Manufactured by:Calpeda S.p.A based inMontorso Vicentino, ITALY
Horizontal multi-stage close coupled pumps in chrome-nickel stainless steel. Compact and robust construction, without protruding flange and with single-piece lantern bracket and base. Single-piece barrel casing, with front suction port above pumps axis and radial delivery at top. Filling and draining plugs on the middle of the pump, accessible from any side (like the terminal box). MXHL: ...
Manufactured by:Calpeda S.p.A based inMontorso Vicentino, ITALY
Easy to install, compact and plug and play pressurized system with self-priming pumps and integrated pressure transducer for automatic control of starting/stopping of the pump when utilization points are opened/closed with a integrated non-return valve into the pump ...
Manufactured by:Calpeda S.p.A based inMontorso Vicentino, ITALY
Self-priming booster set with built in frequency converter. MÈTA is a plug and play solution, the pump is equipped with an integrated pressure transducer, an integrated check valve and a built-in pressure vessel. The Vsd controls the start and stop of the pump and allows to keep a constant pressure. Boosting sets with 2 pumps Suction and delivery manifolds in stainless steel AISI 304. ...
Manufactured by:Calpeda S.p.A based inMontorso Vicentino, ITALY
Horizontal multi-stage close coupled pump. Single-piece barrel casing in chrome-nickel stainless steel, with front suction port above pumps axis and radial delivery at top. Stages in ...
Manufactured by:Calpeda S.p.A based inMontorso Vicentino, ITALY
Vertical multi-stage pumps with suction and delivery connections of the same diameter and arranged along the same axis (in-line). Corrosion-resistant bearing sleeves lubricated by the pumped liquid. Removal of the mechanical seal without dismantling the motor (for MXV 25-32-40-50,100 with motors exceeding 4 KW). A pump with thrust bearing and sleeve coupling for use of any standard motor with IM ...
Manufactured by:Calpeda S.p.A based inMontorso Vicentino, ITALY
Close-coupled, centrifugal pumps; electric motor with extended shaft directly connected to the pump. NM: single-impeller. NMD: with two back-to-back impellers (with axial thrust balancing). Connections: threaded ports ISO 228/1 (BS 2779). NM, NMD: version with pump casing and lantern bracket in cast iron. BNM, BNMD: version with pump casing and lantern bracket in bronze. The pumps are supplied ...
Manufactured by:Calpeda S.p.A based inMontorso Vicentino, ITALY
Pressure boosting sets with automa- tic operation, consisting of 1 variable speed pump with frequency conver-ter into the control panel and from 1 to 5 fixed speed pumps, assembled on a common baseplate, with suction and delivery manifolds, gate and non-return valves, pressure gauge, control panel and 20 litres diaph- ragm tank (on ...
Manufactured by:Calpeda S.p.A based inMontorso Vicentino, ITALY
Easy to install, compact and plug and play pressurized system with multistage pumps and integrated pressure transducer for automatic control of starting/stopping of the pump when utilization points are opened/closed with a integrated non-return valve into the pump ...
Manufactured by:Calpeda S.p.A based inMontorso Vicentino, ITALY
5” Close coupled multi-stage submersible pumps. Easy to install, compact and plug and play with integrated pressure transducer for automatic control of starting/stopping of the pump when utilization points are opened/closed with a integrated non-return valve. External jacket in stainless steel AISI 304 and stages Noryl. E-MPSM with built-in capacitor, accessible through the delivery casing. ...
Manufactured by:Richard Alan Group based inOwl Lane, UNITED KINGDOM
As one of Calpeda’s leading UK Distributors, Pumps & Gearboxes are able to offer unrivalled levels of support and service; in addition to the all important factor of competitive pricing. The Calpeda product range is a quality alternative to leading manufacturers and when cost is an issue Pumps & Gearboxes are able to cross refer pump products in order to reduce customer ...