- Home
- Equipment
Refine by
Cem Environmental Equipment & Supplies
13 equipment items found
Manufactured by:CEM Specialties Inc. based inLondon, ONTARIO (CANADA)
The method of hot-wet gas analysis is widely used – in power plants, in waste incinerations, in paper, glass and cement industries and many more. A partial flow of gaseous components is withdrawn by a sampling probe and sampling pipe and led to the analyser cabinet. The sample gas is tempered at 185 °C for the whole gas path and monitored for flow and temperature. This high temperature ...
Manufactured by:CEM Corporation based inMatthews, NORTH CAROLINA (USA)
The SAM 255™ is a unique instrument for rapidly drying samples up to 1kg in size. It can be used for moisture analysis or as a preparatory step for further analysis. Drying times are reduced from hours to minutes with the precision of a conventional oven method. Almost any material can be dried using microwave energy as the volatile component can be water or a wide range of polar organic ...
Manufactured by:CEM Corporation based inMatthews, NORTH CAROLINA (USA)
Our unique quartz fiber crucibles significantly reduce the time required to ash samples compared to other non-porous crucibles such as ceramic or platinum. With improved airflow throughout the crucible, samples can be ashed up to 90% faster and are compatible with any type of muffle furnace. CEM’s quartz fiber crucibles cool to the touch in seconds, making them safer to use and allowing ...
Manufactured by:AMP-Cherokee based inKnoxville, TENNESSEE (USA)
AMP-Cherokee walk-in Dilution Extractive CEMS is offered in an instrument rack design. Our walk-in shelters are available for either general purpose or explosion proof applications. AMP-Cherokee also offers a compact self-contained walk-up shelter (See MiniCEMS ®) for space constrained or budget conscious applications. The local 15” color touch-screen HMI interface and plug-and-play ...
Manufactured by:CEM Specialties Inc. based inLondon, ONTARIO (CANADA)
The measuring of dust emissions can be carried out discontinuously or continuously depending on the requirements. Periodic measurements are applicable only to a limited sampling for the determination of emissions behaviour on site. However, it has to allow conclusions about the continuous behaviour of the system and take into account possible seasonal variations of the measured air pollution. ...
by:CEM Service Group, Inc. based inBedminster, PENNSYLVANIA (USA)
Industrial CEMS shelters are provided in many sizes and configurations to meet your specifications including Class 1, Div 2 compliant shelters. Your shelter will provide your CEMS with protection from the elements, a closer proximity to your sample probe and a temperature controlled environment. ...
Manufactured by:AMP-Cherokee based inKnoxville, TENNESSEE (USA)
AMP-Cherokee walk-in Direct Extractive CEMS is offered in both a wall-mount and instrument rack design. Our walk-in shelters are available for either general purpose or explosion proof applications. The local 15” color PC touch-screen HMI interface and plug-and-play component functional design sets a new standard for CEMS reliability and ease of operation. AMP-Cherokee also offers a compact ...
Manufactured by:CEM Specialties Inc. based inLondon, ONTARIO (CANADA)
A qualitative dust measurement, for example by triboelectric filter monitoring, includes both the monitoring of the clean gas dust content after dust collectors as well as the evaluation of the status of the exhaust gas cleaning ...
Manufactured by:CEM Specialties Inc. based inLondon, ONTARIO (CANADA)
Devices used for the continuous dust measurement register in the wider sense the physical changes caused by the particles in the measuring system converting them into electrical signals. For that the measured object can be analysed directly in exhaust gas channel (in-situ measurement) or a partial volume flow is collected and fed into a measuring device (extractive ...
Manufactured by:CEM Specialties Inc. based inLondon, ONTARIO (CANADA)
Industrial plants requiring approval are subject to strict requirements for compliance of emissions limit values. For monitoring it is only allowed to use measuring devices approved by the Federal Environment Agency. The approval requirements are defined in EN 15267. The number of measured components depends on the plant type, but also on the used ...
Manufactured by:CEM Specialties Inc. based inLondon, ONTARIO (CANADA)
Cold-dry measurement is – same like hot-wet measurement – based on the extractive working principle. A partial flow of gaseous components is withdrawn by a sampling probe and sampling pipe and led to the analysis cabinet. A gas conditioning inside the cabinet cools the sample gas to 5 °C. Then up to five components are measured in parallel – a real added value for ...
Manufactured by:CEM Specialties Inc. based inLondon, ONTARIO (CANADA)
Emission measuring devices or systems can in principle also be used for various process applications. Furthermore devices for special requirements and applications are designed by CEMSI ...
Manufactured by:Berkeley Advanced Biomaterials (BAB) based inBerkeley, CALIFORNIA (USA)
Cem-Ostetic® is a bio-engineered mixture of calcium-based inorganic compounds. After it is implanted, Cem-Ostetic® resorbs and is later replaced by natural bone. ...