- Home
- Equipment
Refine by
Conbar Environmental Equipment & Supplies
10 equipment items found
Manufactured by:CONBAR ep based inMonroeville, NEW JERSEY (USA)
Our fixed length sampler allows the sample to be taken directly into a sampling container. The samplers are available with a 960ml plastic wide mouth jar or a 1L glass jar. Both samplers incorporate our swivel adapter, which allows the container to rotate almost 360 degrees. This swiveling action allows samples to be taken from almost any ...
Manufactured by:CONBAR ep based inMonroeville, NEW JERSEY (USA)
The Swing Sampler is designed to collect samples from a horizontal flowing stream, such as a sewer. The swing jar holder allows for collection angles up to 90 degrees. The sampler is manufactured from telescoping fiberglass poles and is available in two sizes - 6' to 12', and 8' to 24'. The sampler is supplied complete with one plastic clamp, which holds the bottle in place, and one plastic 960ml ...
Manufactured by:CONBAR ep based inMonroeville, NEW JERSEY (USA)
Our Telescopic Sampler is manufactured using locking telescopic aluminum tubing and is available in lengths up to 24' The sampler incorporates a threaded polyethylene head that swivels almost 360 degrees. The 5380 series head accommodates a 960 ml plastic jar while the 5385 series accommodates a 1L glass jar. In operation, the sampler is quick and easy to use. Just screw in the jar, extend the ...
Manufactured by:CONBAR ep based inMonroeville, NEW JERSEY (USA)
Specially designed with an inside diameter if 1 3/8' to allow for the passage of large solid particles during sampling of grease holding tanks. The clear tubing is easy to see through and the 1-foot markers show the depth of the submersion into the tank. When the unit is lowered into the liquid, the float valve opens, allowing the sample to flow in. Upon reaching the bottom, the unit is raised up ...
Manufactured by:CONBAR ep based inMonroeville, NEW JERSEY (USA)
Save time and money by eliminating sampler cleaning costs and cross-contamination problems. Each sterilized sampler is individually wrapped and ready to use. The samplers are easy to use. To operate - push the sampler into the product, rotate handle to open sampler, allow a few seconds for the sampler to fill, rotate the handle closed and remove sample. Slide the inner rod out of the outer tube ...
Manufactured by:CONBAR ep based inMonroeville, NEW JERSEY (USA)
The NASCO Sludge Nabber makes sample collection of liquids fast and easy. It has an adjustable aluminum pole that extends from 4 to 6½, feet, making it easy to reach the liquid to be sampled and carried. The Sludge Nabber is ideally suited for numerous sampling requirements including chlorine in solution. Sample bottles of various sizes (250 ml to 1000 ml) are held in a polyurethane holder ...
Manufactured by:CONBAR ep based inMonroeville, NEW JERSEY (USA)
The CONBAR stainless bomb samplers are manufactured from a high quality corrosion resistant type 304 stainless steel. The bomb samplers are designed to collect liquid samples from storage tanks, lakes, ponds, manholes, wells, and other hard to reach places. The plunger assembly will be activated automatically when the sampler contacts a hard surface such as the bottom of a tank, or it may be ...
Manufactured by:CONBAR ep based inMonroeville, NEW JERSEY (USA)
Manufactured from brass and bronze, then nickel plated, these samplers are designed to extract samples from drums, tanks, tank cars, wells, and ponds. The plunger assembly will be activated automatically when the sampler contacts a hard surface such as the bottom of a tank, or it may be activated by the operator at various depths with the use of a pull line. This feature allows samples to be ...
Manufactured by:CONBAR ep based inMonroeville, NEW JERSEY (USA)
The brass-bronze composite, or average, bomb sampler is equipped with an adjustable needle valve to control the liquid rate of fill. When lowered into a tank or liquid container, liquid flows into the lower end of the sampler at the rate that the air is being displaced through the needle valve or plug assembly. If the sampler is lowered at a uniform rate, the sample collected will be a composite ...
Manufactured by:CONBAR ep based inMonroeville, NEW JERSEY (USA)
These nylon brushes are specifically designed to clean most common sizes of bailers. Each brush has a nylon head 4-3/4" long and has an overall length of 42", which allows the brush to be used when cleaning bailers up to 3 feet long when cleaning from one end, and up to 6 feet long when the bailer can be cleaned from both ...