- Home
- Equipment
Refine by
Diteco Environmental Equipment & Supplies
7 equipment items found
Manufactured by:Diteco Limited based inWarlingham, UNITED KINGDOM
Water vapour in the range 0 - 1,000 ppm can be measures with this analyser using an electrolytic cell. Water vapour is a notoriously difficult measurement to make as it adheres to stainless steel tubing, valves, filters etc. Diteco use chemically treated tubing to reduce the adherence of the water to the ...
Manufactured by:Diteco Limited based inWarlingham, UNITED KINGDOM
As calibration cylinders of known moisture content are unstable and cannot be prepared with any accuracy or repeatability, Diteco developed an instrument capable of producing a known concentration of water in a carrier gas, typically nitrogen. It can be used to calibrate other moisture monitors, or as a stand-alone moisture ...
Manufactured by:Diteco Limited based inWarlingham, UNITED KINGDOM
Measures H2S in continuous flowing and pressurized gaseous streams. Duty: To measure the concentration of H2S in a process gas stream. The principle of operation is as follows. A reel of paper tape impregnated with lead acetate is exposed to the gaseous process sample in the sample chamber. Hydrogen sulphide (H2S) in the process sample reacts with the lead acetate, after acidification, to form ...
Manufactured by:Diteco Limited based inWarlingham, UNITED KINGDOM
To measure O2 in permanent gases at the % level, and providing that there are no combustibles in the gas, a Zirconium Oxide (ZrO2) cell can be used. Ranges between 0-10ppm up to 0-98% O2 can be ...
Manufactured by:Diteco Limited based inWarlingham, UNITED KINGDOM
The DITECO 1801 Moisture Analyser can be utilised in a wide range of applications, in fact on most flowing gases where a fast, accurate measurement of trace water vapour content in a gas is required. Water vapour in the range 0 - 1,000 ppm can be measures with this analyser using an electrolytic cell. Water vapour is a notoriously difficult measurement to make as it adheres to stainless steel ...
Manufactured by:Diteco Limited based inWarlingham, UNITED KINGDOM
As calibration cylinders of known moisture content are unstable and cannot be prepared with any accuracy or repeatability, Diteco developed an instrument capable of producing a known concentration of water in a carrier gas, typically nitrogen. It can be used to calibrate other moisture monitors, or as a stand-alone moisture ...
Manufactured by:Diteco Limited based inWarlingham, UNITED KINGDOM
Water vapour in the range 0 - 1,000 ppm can be measures with this analyser using an electrolytic cell. Water vapour is a notoriously difficult measurement to make as it adheres to stainless steel tubing, valves, filters etc. Diteco use chemically treated tubing to reduce the adherence of the water to the ...