- Home
- Equipment
Show results for
Refine by
Ect2 Environmental Equipment & Supplies
9 equipment items found
Manufactured by:ECT2, a Montrose Environmental Group based inPortland, MAINE (USA)
ECT2’s SORBIX H Series is designed for applications requiring flow rates of up to 1,357 GPM per vessel, such as drinking water systems. Additional vessel trains can be added to achieve any required flow ...
Manufactured by:ECT2, a Montrose Environmental Group based inPortland, MAINE (USA)
Granular Activated Carbon (GAC) technology has become a popular choice for drinking water applications due to its effectiveness in treating water with low levels of contamination. This technology has proven to be highly effective in meeting less stringent effluent standards, making it a reliable solution for ensuring the safety and quality of drinking water. Its use has been widely adopted by ...
Manufactured by:ECT2, a Montrose Environmental Group based inPortland, MAINE (USA)
The SORBIX M Series systems are housed in single shipping containers, designed to meet the demands of rapid installation and start-up. Systems include pre-treatment, as required, are configured for SORBIX PURE or SORBIX RePURE resins, and come in 50, 100, 200, and 200+ GPM (3, 6, 12 and 12+ L/sec) ...
Manufactured by:ECT2, a Montrose Environmental Group based inPortland, MAINE (USA)
ECT2 has ready-to-run Pilot PS Series for rapid deployment and implementation around the world. These can be installed anywhere, which includes integration into other systems, allowing the technology to be demonstrated to ...
Manufactured by:ECT2, a Montrose Environmental Group based inPortland, MAINE (USA)
ECT2’s SORBIX™ L Series is designed for projects requiring flow rates of 35 GPM or less. For optimum performance, two vessels should be installed in a lead/lag ...
Manufactured by:ECT2, a Montrose Environmental Group based inPortland, MAINE (USA)
LC (Low Concentrations) Model Designed to treat low concentrations ...
Manufactured by:ECT2, a Montrose Environmental Group based inPortland, MAINE (USA)
Manufactured by:ECT2, a Montrose Environmental Group based inPortland, MAINE (USA)
Regenerable ion exchange (IEX) resin is commonly used in high PFAS concentration applications, including groundwater remediation, wastewater, and landfill leachate. ECT2’s regenerable resin, SORBIX RePURE, is a patented technology, enabled by a proprietary specialty regenerant solution, that allows PFAS-saturated resin to be regenerated onsite and reused. Following regeneration, the ...
Manufactured by:ECT2, a Montrose Environmental Group based inPortland, MAINE (USA)
Foam Fractionation is most used in applications with high concentrations of PFAS and co-contaminants. Foam Fractionation Treatment using FOAM-X™ is the technology that ECT2 applies to these highly contaminated waters, such as groundwater remediation, wastewater treatment, and landfill leachate ...