- Home
- Equipment
Refine by
Emi Environmental Equipment & Supplies
24 equipment items found
Manufactured by:Environmental Manufacturing, Inc. (EMI) based inManhattan, KANSAS (USA)
This sampler is designed to take undisturbed samples from cohesive type soils and clays. The thin steel tube containing the sample may be removed from the sampler head and used as a container to transport the sample to the laboratory thus avoiding any damage to the sample or costly delays in operation. In practice, several replacement tubes are carried by the crew to minimize disturbance, ...
Manufactured by:Environmental Manufacturing, Inc. (EMI) based inManhattan, KANSAS (USA)
Whale Purge Pumps provide an easy-to-use, high-quality, economical solution for purging, sampling, and well development to a depth of 27 m (90 ft). The pump’s 36 mm (1 7/16”) diameter is ideal for use in 2” or larger monitoring ...
Manufactured by:EMI sp. z o.o. based inDębowiec, POLAND
A modern method of wastewater treatment using granulated anaerobic sludge. Used in the case of streams with large and very large pollutant loads. The purification process produces biogas that can be used as a source of energy. A special advantage is the resistance of the treatment plant to fluctuations and interruptions in the sewage inflow. It is easy to recognize the technology by the ...
Manufactured by:EMI sp. z o.o. based inDębowiec, POLAND
Most compact unit designed for the sole purpose of diluting polyelectrolyte emulsion. Construction focused on minimum size and simplicity. Applicable where polyelectrolyte consumption is low and purchase and running costs have to be kept at lowest level. This compact unit consists of a emulssion storage tank, a pump and dilution tank with a mixer. It offers a unique feature of supplying solution ...
Manufactured by:China EMI Shielding Materials Co.,Ltd based inJinan, CHINA
Technical specification of EMI Shielding Gaskets The EMI Shielding Gaskets are made of spong and conductive fabric which can be used in the gap of the equipments and provide a connection.They have good shield efficiency,impedance of clip measurement,it can be used for the high radiation instruments of electronic industries,medical industries,electromagnetism,IT industry.We can supply the products ...
Manufactured by:EMI sp. z o.o. based inDębowiec, POLAND
Construction of batch units was designed for excellence in preparation of polyelectrolyte. Separate tanks for dilution&maturing and storage provide ultimate quality of solution. Mature product has no contact with fresh portion, every drop is staged for equal time. Maturing tank is placed over storage tank and the transfer is done with the force of gravity. Controls of the batch units allow to ...
Manufactured by:Equipment Manufacturers International, Inc. based inCleveland, OHIO (USA)
As the leading US manufacturer of foundry equipment, EMI is bringing complete turnkey design, manufacture, and installation of your mold handling equipment. Beyond offering the right mold making solutions, EMI is uniquely qualified to deliver the right mold handling and foundry cooling systems to meet your needs today while being flexible for ...
Manufactured by:EMI sp. z o.o. based inDębowiec, POLAND
A basic device for separating solid elements from waste water stream. Waste water flow is directed on a curved plate with slots. Water flows through and solids slide down the curve. Construction does not contain any moving elements, water flows with the force of gravity. Applicable in mechanical treatment of waste water from food processing ...
Manufactured by:EMI sp. z o.o. based inDębowiec, POLAND
Construction of batch units was designed for excellence in preparation of polyelectrolyte. Separate tanks for dilution&maturing and storage provide ultimate quality of solution. Mature product has no contact with fresh portion, every drop is staged for equal time. Maturing tank is placed over storage tank and the transfer is done with the force of gravity. Controls of the batch units allow to ...
Manufactured by:EMI sp. z o.o. based inDębowiec, POLAND
Flotation is a renowned method for separating suspended solids, oils and fat from waste water. EMI dissolved air flotation units were designed to perform the process in optimal conditions. Raw waste water is mixed with precisely dosed chemicals in a pipe flocculator neatly composed with main unit or placed separately. Air dissolving happens in controlled conditions ...
Manufactured by:Environmental Manufacturing, Inc. (EMI) based inManhattan, KANSAS (USA)
A continuous seamless filter fabric, knitted specifically for ground water monitoring and remediation. Aqua-Sleeve® filter fabric is used to prevent sediment and small fines from clogging the well point. It allows water to pass through the pipe at a high rate while minimizing silica sand or fine particle invasion which can cause well failure. It is used in both vertical and horizontal ...
Manufactured by:Environmental Manufacturing, Inc. (EMI) based inManhattan, KANSAS (USA)
The H.OIL interface meter includes yellow tensile steel tape manufactured to the ASME standard of accuracy jacketed in Kynar, Heron Carry Case, cleaning kit and field replaceable ...
Manufactured by:Environmental Manufacturing, Inc. (EMI) based inManhattan, KANSAS (USA)
Concentrated, anionic liquid deter gent for manual and ultrasonic cleaning. Free rinsing to yield reliable results with no interfering residues. Extremely mild and completely soluble in hard and soft water. USDA authorized. Dilute 1:100. pH ...
Manufactured by:Environmental Manufacturing, Inc. (EMI) based inManhattan, KANSAS (USA)
The economical Water Tape includes a Kevlar reinforced white polyethylene tape, Heron Carry Bag and fully pressure rated easy clean Enviro ...
Manufactured by:Equipment Manufacturers International, Inc. based inCleveland, OHIO (USA)
EMI Low Pressure Molding Machines serve as comprehensive automatic production centers designed specifically for manufacturing castings that require high material integrity, particularly in thin-walled applications. These machines incorporate fully enclosed systems capable of automating the entire casting process, including core setting, casting extraction, gate screen setting, mold cleaning, and ...
Manufactured by:Environmental Manufacturing, Inc. (EMI) based inManhattan, KANSAS (USA)
Concentrated, anionic detergent for manual and ultrasonic cleaning. Free rinsing to give you reliable results without interfering residues. Ideal for cleaning contaminants from glassware, metals, plastic, ceramic, porcelain, rubber, and fiberglass. Excellent replacement for corrosive acids and hazardous solvents. USDA authorized. Dilute 1:100. pH ...
Manufactured by:EMI sp. z o.o. based inDębowiec, POLAND
An advanced device for separating solid elements from waste water stream. Flow is directed into a slotted drum. Water flows through the drum and solids are scrapped outside. The drum rotates under a set of nozzles using water pressure to clean the drum and the slots. Rotary drums with internal inflow are perfect for all sorts of industries, ranging from food processing to PET ...
Manufactured by:EMI sp. z o.o. based inDębowiec, POLAND
Most popular type of a drum/screen used for separating solids from waste water stream.Flow is directed onto a slotted drum. Water flows through the drum and solids are scrapped off the drum. The drum rotates under a set of nozzles using water pressure to clean the drum and the slots. Rotary drums with external inflow are suitable for all sorts of industries, ranging from food processing to PET ...
Manufactured by:EMI sp. z o.o. based inDębowiec, POLAND
Most popular type of polyelectrolyte preparation station (PPS). Construction features a single tank with 3 separate chambers for diluting, maturing and storage of polyelectrolyte solution. Water flows through all of the chambers in a sequence. Multi-plate overflow prevents back-flows and gives sufficient retention time for maturing. The station can be equipped with a hopper for powder and/or ...
Manufactured by:EMI sp. z o.o. based inDębowiec, POLAND
Construction of batch units was designed for excellence in preparation of polyelectrolyte. Separate tanks for dilution&maturing and storage provide ultimate quality of solution. Mature product has no contact with fresh portion, every drop is staged for equal time. Maturing tank is placed over storage tank and the transfer is done with the force of gravity. Controls of the batch units allow to ...