- Home
- Equipment
Refine by
Enelsan Environmental Equipment & Supplies
10 equipment items found
Manufactured by:Enelsan Endustriyel Elektronik AS based inDilovasi , TURKEY
EGLG magnetic by-pass level indicators are mounted on the outer or upper surfaces of tanks, boilers and tanks. It gives the opportunity to see the level easily and with high ...
Manufactured by:Enelsan Endustriyel Elektronik AS based inDilovasi , TURKEY
Ultrasonic flowmeters take measurements via the outside of the pipe with high frequency sound. While the transmitter sensor of the flowmeter, which takes measurements with the help of 2 sensors, sends high frequency sound waves into the pipe, the receiver sensor determines the velocity of the fluid according to the reception of this signal. In pipes of different materials, measurements can be ...
Manufactured by:Enelsan Endustriyel Elektronik AS based inDilovasi , TURKEY
EGCAP level transmitters are capacitive level sensors used for level measurement in conductive liquids, low conductivity liquids, solid particulate and powdery materials, sticky and acid/basic liquids. When the material comes between the electrode rod and the tank wall, there is a capacity. It precisely measures this capacitance change and converts it to an analog signal. Full - empty calibration ...
Manufactured by:Enelsan Endustriyel Elektronik AS based inDilovasi , TURKEY
EGLStx Level sensors are used for tank level and control. When the magnetic field of the magnet inside the float which moves along the tube according to the liquid level, is aligned with the reed sensor, there is electricity turns the circuit on or ...
Manufactured by:Enelsan Endustriyel Elektronik AS based inDilovasi , TURKEY
EUF-200B Ultrasonic flowmeter is improved for long-term online measurement with wide measuring range. It is produced as converter protection class IP67 and sensor protection class IP68. It is suitable for use in many liquid measurements. Ultrasonic flowmeters are flowmeters that take measurements from the outside of the pipe with high frequency sound.While the transmitter sensor of the flowmeter, ...
Manufactured by:Enelsan Endustriyel Elektronik AS based inDilovasi , TURKEY
In order to provide high precision and accuracy in calorie measurement, the flow measurement method operating on the ultrasonic principle and temperature measurement with the PT100 temperature sensor are used. The main unit calculates calories by estimating the energy difference between the temperature sensors according to the flow rate it receives and the temperature difference between the 2 ...
Manufactured by:Enelsan Endustriyel Elektronik AS based inDilovasi , TURKEY
GCAS level switch is a capacitive level sensor used for level control in conductive liquids, low conductivity liquids, powdery materials with solid particles, sticky and acid/basic liquids. When the material comes between the electrode rod and the tank wall, there is a capacity change and when this change exceeds the set limit, the contact gives the output. It is designed for difficult process ...
Manufactured by:Enelsan Endustriyel Elektronik AS based inDilovasi , TURKEY
Electromagnetic flowmeters can be easily used in all liquids with conductivity over 20 uS. They provide a realiable and long-lasting measurement opportunity by changing the sensor selection in liquids with corrosive properties according to different substances. The inner surface can be preferred as rubber or PTFE. The device, which allows density adjustment, flow unit adjustment, and temperature ...
Manufactured by:Enelsan Endustriyel Elektronik AS based inDilovasi , TURKEY
The HYDRA Series electromagnetic flowmeter contains two coils. These coils, with the help of metal blocks placed on them, create a continuous magnetic field across the cross-sectional area of the measurement tube. Two electrodes that detect voltage are placed perpendicular to each other inside the measurement tube. The insulating material coated on the inner surface prevents the formation of ...
Manufactured by:Enelsan Endustriyel Elektronik AS based inDilovasi , TURKEY
In order to be able to measure with high precision in conventional electromagnetic flowmeters, a straight pipe length of x5 diameter in front of the flowmeter and x2 diameter behind the flowmeter is required. In addition, valve outlet, elbow, etc. that may cause turbulence on this line. factors should not exist. With the 0xd Electromagnetic flowmeter, these difficulties are eliminated, and ...
